REMOTE CONTROL 13
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching 
and 
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
ENGLISH
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
yyMake sure to point the remote control at the remote control sensor on the Monitor.
(POWER)
Turns the Monitor on or off.
MONITOR ON / OFF Turn off the monitor and then turn it back on.
1/a/A Button This button selection is not applicable.
ARC
Selects the Aspect Ratio
Mode.
MARK
Selects a specific file in the
USB mode.
Volume Up / Down 
Adjusts the volume level.
PSM 
Selects the Picture Status
Mode.
MUTE 
Mutes all sounds.
ENERGY SAVING Adjusts the brightness of the screen to reduce energy consumption.
INPUT
Selects the input mode.
Number and Alphabet buttons Enters numbers.
The alphabet selection is not applicable.
CLEAR
This button selection is not applicable.
BRIGHTNESS Key
Adjust the brightness by
pressing the Up and Down buttons on the remote control.
In USB mode, the OSD menu has the Page function to move to the next file list.