CONTROLLING THE MULTIPLE PRODUCT 83
53.On Time(Repeat Mode/ Time) (Command: f d) 1) To set the On Time(Repeat mode/ Time) function.
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
00:Repeat Off
01:Repeat Once
02. Repeat Daily
03:Repeat from Monday to Friday
04:Repeat from Monday to Saturday
05:Repeat from Saturday to Sunday
06. Repeat on Sunday
07:Repeat on Monday
08:Repeat on Tuesday
09:Repeat on Wednesday 0A: Repeat on Thursday
0B: Repeat on Friday
0C: Repeat on Saturday
Data2
00 to 17: 00 to 23 Hours Data3
00 to 3B: 00 to 59 Minutes
*Enter “fd [Set ID] ff” for checking On Timer(Repeat mode/ Time) values.
*Check if Time1 and Time2 have been set before setting this function.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
2)To check the setting value of the On Time (Repeat Mode/ Time) function.
Transmission
[f][d][ ][Set ID][ ][Data][ ][f][f][ ][f][f][Cr]
Data1
f`1 ~ f7: From the first to the seventh index no. of the On Time list
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3] [Data4][x]
Data1
From the first to the seventh index no. of the On Time list
Data2
00:Repeat Off
01:Repeat Once
02. Repeat Daily
03:Repeat from Monday to Friday
04:Repeat from Monday to Saturday
05:Repeat from Saturday to Sunday
06. Repeat on Sunday
07:Repeat on Monday
08:Repeat on Tuesday
09:Repeat on Wednesday 0A: Repeat on Thursday
0B: Repeat on Friday
0C: Repeat on Saturday Data3
00 to 17: 00 to 23 Hours Data4
00 to 3B: 00 to 59 Minutes
54.On Time Input (Command: f u) 1) To set the On Time Input function.
Transmission
[f][u][ ][Set ID][ ][Data][Cr]
Data
20 : AV
40 : Component
60 : RGB
70 :
90 : HDMI
C0 : Display Port
B0 : SuperSign
*Check if Time1 and Time2 and On Time(Repeat Mode/Time) functions have been set before setting this function.
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
2)To check the setting value of the On Time Input function.
Transmission
[f][u][ ][Set ID][ ][Data][ ][f][f][Cr]
Data1
f`1 ~ f7: From the first to the seventh index no. of the On Time Input list
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data1][Data2]
Data1
f`1 ~ f7: From the first to the seventh index no. of the On Time Input list
Data2
20 : AV
40 : Component
60 : RGB
70 :
90 : HDMI
C0 : Display Port
B0 : SuperSign
55.H Position (Command: f q) To set the Horizontal position.
* Only available for Tile Off mode.
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data
00~64: Left
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]