Onkyo SR804 instruction manual Turning On the AV Receiver, Turning On and Standby

Turning On the AV Receiver

• North American and	• Other models
Australian models
STANDBY/ON	STANDBY/ON
STANDBY indicator	STANDBY indicator
STANDBY/ON	STANDBY/ON
STANDBY	STANDBY
ZONE 2	ZONE 2

				POWER
				ON	OFF
PURE AUDIO	MULTI CH	DVD	VIDEO 1	PURE AUDIO		MULTI CH	DVD	VIDEO 1
				POWER

STANDBY
	ON	STANDBY	TV
ON
			I	INPUT
	V1	V2	V3
	1	2	3	+
	V4	MULTI CH	DVD	TV CH
	4	5	6	-
	CD	TAPE	TUNER
	7	8	9
	PHONO			TV VOL
	+10	0	CLEAR
	- - / - - - 10	11	12
	INPUT SELECTOR
		MACRO
	1	2	3	ZONE2
RECEIVER		REMOTE MODE
	RECEIVER	DVD	CD	HDD
	TAPE/AMP
	TV	VCR	CABLE	SAT
			CDR	MD
	DIMMER			SLEEP

Turning On and Standby

1 POWER

ON OFF

Set the [POWER] switch to the ON position ().

(Skip this step if you have the North American or Australian model.)

The AV receiver enters Standby mode, and the STANDBY indicator comes on.

2

AV receiver	Remote
	controller
STANDBY/ON	RECEIVER

or

Press the [STANDBY/ON] button.

Alternatively, press the remote controller’s [RECEIVER] button, followed by the [ON] button.

The AV receiver comes on, the display lights up, and the STANDBY indicator goes off. Pressing the remote controller’s [ON] button again will turn on any components con-

nected via .

ON	To turn the AV receiver off, press the [STANDBY/ON] button, or press the remote
	controller’s [STANDBY] button. The AV receiver will enter Standby mode. To prevent
	any loud surprises when you turn on the AV receiver, always turn down the volume
	before you turn it off.

For models other than the North American and Australian models:

• To completely shut down the AV receiver, set the [POWER] switch to the OFF position ().

Smooth Operation in a Few Easy Steps

To ensure smooth operation, here’s a few easy steps to help you configure the AV receiver before you use it for the very first time. These settings only need to be made once.

■Do the automatic speaker setup—this is essential!

See “Automatic Speaker Setup” on page 40.

■Have you connected a component to an HDMI input, component video input, or digital audio input?

If you have, see “HDMI Video Setup” on page 43, “Component Video Setup” on page 44, or “Digital Audio Input Setup” on page 45 respectively.

■Have you connected an Onkyo MD recorder, CD recorder, or next generation HDD-compatible component?

If you have, see “Changing the Input Display” on page 46.

HDMI	Y
	PB	COAXIAL
	PR	OPTICAL
OUT IN
TAPE	CD recorder, MD recorder,
	RI Dock, etc.

39