Onkyo SR804 Connecting Zone, Using an Amp in Zone, Using Only Speakers in Zone

Page 82

Zone 2

Connecting Zone 2

With the Zone 2 function, you can enjoy one input source in the main room and a different input source in another room.

There are two ways to hook up your Zone 2 speakers:

1)Use an amp (receiver or integrated amp) in Zone 2 and connect your Zone 2 speakers to it.

2)Connect your Zone 2 speakers to this AV receiver.

Using an Amp in Zone 2

With this hookup, you can enjoy 7.1-channel playback in the main room and a different stereo source in Zone 2. The volume for Zone 2 is set on the other amp.

Hookup

•Use an RCA audio cable to connect the AV receiver’s ZONE 2 LINE OUT L/R jacks to an analog audio input on the amp in Zone 2.

•Connect the Zone 2 speakers to the speaker terminals on the amp in Zone 2.

Main room

TV

AV receiver

Using Only Speakers in Zone 2

With this hookup, you can enjoy 5.1-channel playback in the main room and a different stereo source in Zone 2. The volume for Zone 2 is set on this AV receiver.

Hookup

•Connect your Zone 2 speakers to the AV receiver’s ZONE 2 SPEAKERS terminals.

Main room

TV

AV receiver

Zone 2

LR

You must set the “Powered Zone 2” setting to “Act” (Activated) in order to use this hookup (see page 83).

Zone 2

 

 

IN

R

L

 

Receiver/

 

integrated amp

You don’t need to make any settings to use this hookup. Proceed to “Using Zone 2” on page 83.

Zone 2 12V Trigger

When Zone 2 is turned on, the ZONE 2 12V TRIGGER OUT goes high (+12 volts, 100 milliamperes max). Con- necting this jack to a 12-volt trigger input on a compo- nent in Zone 2 will turn that component on or off when Zone 2 is turned on or off on this AV receiver.

82

Page 81 Page 83
Image 82
Page 81 Page 83
Contents TX-SR804 TX-SR804E Important Safety Instructions AvisPrecautions PowerPrecautions Supplied AccessoriesFCC Information for User Features Main Room Multiroom CapabilityZone 2 Sub Room Contents Getting to Know the AV Receiver Front PanelGetting to Know the AV Receiver Display Component Video in 1, 2, Rear PanelHdmi in 1, 2, and OUT XM antenna on North American modelGND screw RS232Voltage Selector on some models Video 1 IN/OUT and Video 2 IN/OUTInstalling the Batteries Remote ControllerUsing the Remote Controller About the Remote Controller Modes Remote ControllerRECEIVER/TAPE Mode Tape mode Listening Mode buttonsRemote Mode buttons Standby buttonDVD Mode CD, MD, and CDR Modes HDD Mode Enjoying Home Theater Connecting Your SpeakersFront left and right speakers Connecting Your Speakers Connecting Your SpeakersRead the following before connecting your speakers Speaker Connection PrecautionsConnecting the Speaker Cables Strip about 5/8Connecting the AM Loop Antenna Connecting AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shown American ModelConnecting an Outdoor AM Antenna Connecting AntennaConnecting an Outdoor FM Antenna Using a TV/FM Antenna SplitterOptical Digital Jacks Connecting Your ComponentsAbout AV Connections AV Connection Color CodingWhich Connections Should I Use? Connecting Your ComponentsConnecting Audio and Video Signals to the AV Receiver Video Connection FormatsAudio Connection Connecting a TV or ProjectorVideo Connection HintConnecting a DVD player Or the otherHooking Up the Multichannel DVD Input DVD playerConnecting a VCR or DVD Recorder for Playback DVD recorderConnecting a VCR or DVD Recorder for Recording Satellite, cable, set-top box, etc Supported Audio Formats Connecting Components with HdmiAbout Hdmi About Copyright ProtectionAudio Signal Flow Chart Video Signal Flow ChartMaking Hdmi Connections Connecting a Camcorder, Games Console, or Other Device Tape Tuner Phono DisplayStep Connecting a CD PlayerConnecting a Turntable CD playerConnecting a Power Amplifier Connecting a Cassette, CDR, MiniDisc, or DAT RecorderPower amplifier European and some Connecting an HDD-compatible ComponentConnecting the Power Cords of Other Components Asian modelsAuto Power On/Standby Connecting Onkyo ComponentsConnecting the Power Cord Remote ControlTurning On the AV Receiver Set the Power switch to the on positionDo the automatic speaker setup-this is essential Turning On and StandbyConnect the setup microphone to the Setup MIC jack First Time SetupAutomatic Speaker Setup Turn on the AV receiverPress Enter First Time SetupDisconnect the speaker setup MicrophoneButtons to select the item that Checking the ResultsUse the Up and Down You want to check, and thenPress the Setup button Hdmi Video SetupFollowed by the Setup button Setup closesComponent Video Setup Input selector Default assignment Digital Audio Input SetupDigital Input menu appears Changing the Input Display Minimum Speaker ImpedanceHardware Setup menu appears TV Format Setup Not North American modelsAM Frequency Step Setup on some models You must specify the TV system used in your areaBasic AV Receiver Operation Select a listening mode and enjoyPlaying Your AV Components Start playback on the source componentListening to AM/FM Stations Tuning into AM/FM Radio StationsListening to the Radio Displaying AM/FM Radio InformationListening to the Radio Using RDS European Model OnlyWhat is RDS? RDS Program Types PTYFinding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Setting the Satellite Radio Mode North American Models OnlySigning Up for XM Satellite Radio Connecting the XM Mini-Tuner and Home DockUse the Tuning Up and Down Buttons to select Radio ID Selecting XM Satellite RadioSelecting XM Radio Channels Displaying XM Radio Information Positioning the XM AntennaSelecting Presets Presetting AM, FM, and XM StationsDeleting Presets Multichannel DVD Input Settings Using the Multichannel DVD InputUsing the Multichannel DVD Input Input ChannelMuting the AV Receiver Setting the Display Brightness Adjusting Speaker LevelsCommon Functions Common Functions Using the Sleep TimerUsing Headphones Displaying Source InformationSelecting the Listening Modes Using the Listening ModesSelecting with the Remote Controller Selecting on the AV ReceiverUsing the Listening Modes DVDAbout the Listening Modes Use this mode with any stereo movie e.g., TV, DVD, VHSSound is output by the front left and right speakers This mode is designed for use with video games Onkyo Original DSP ModesRecording the Input Source RecordingRecording Audio and Video from Separate Sources Main menu Onscreen Setup MenusAbout the Onscreen Setup Menus SubmenuUsing the Re-EQ Function Adjusting the Listening ModesAudio Adjust Menu Use the Up and Down Buttons to select an option,PL IIx and Neo6 Settings PL IIx Music 2 ch only Adjusting the Listening ModesTone Control Settings Neo6 MusicLFE Level Setting Dolby Digital SettingsMono/Multiplex Settings MultiplexListening Mode Preset menu appears Default Listening ModesOptions for that input selector appear Advanced Setup Speaker SetupSubwoofer Mode Advanced SetupLow-Pass Filter for the LFE Channel Buttons to specify Speaker DistanceButtons to select each speaker DistanceSpeaker Level Calibration Buttons to specify the surround THX Audio SetupButtons to select THX Audio Back speaker spacingEqualizer Settings Press the Down Button to Select Character, and then Input SetupCharacter Edit Press the Right Button to Open the character input screenVolume Setup IntelliVolumePreferences Lock Setup OSD SetupHdmi Setup OSD PositionChanging the Remote Controller’s ID Changing the AV Receiver’s Remote IDButtons to select 2. Digital Digital Input Signal FormatsDigital Format menu appears Input, and then press EnterPress the Receiver Remote Mode button Correcting Sound and Picture SyncUsing Only Speakers in Zone Connecting ZoneUsing an Amp in Zone ZoneUsing Zone Powered Zone 2 SettingControlling Zone 2 from the AV receiver Zone 2 Remote Mode button Controlling Zone 2 with the Remote ControllerAdjusting the Volume for Zone To Mute ZoneUsing a Multiroom Kit with Zone Using a Multiroom Kit with a CabinetUsing a Multiroom Kit with Other Components Entering Remote Control Codes Controlling Other ComponentsResetting the Remote Mode Buttons Resetting the Remote ControllerRemote Control Codes for Onkyo Components Connected via Controlling Other ComponentsEject CH +/-, TV CH +CH + MenuLearning Commands from Other Remote Controllers Running Macros Using MacrosMaking Macros Deleting MacrosTroubleshooting Troubleshooting Sound changes when I connect my head- phones Remote controller doesn’t workCan’t learn commands from another remote controller Can’t select XM radio channels North Ameri- can model onlyTroubleshooting Video Section SpecificationAmplifier Section Tuner SectionOnkyo Europe Electronics GmbH Onkyo Europe UK Office

SR804 specifications

The Onkyo SR804 is a high-performance A/V receiver that has established itself as a favorite among home theater enthusiasts. Designed to deliver an immersive audio and visual experience, the SR804 boasts an array of features and technologies that enhance its performance and usability.

At the heart of the Onkyo SR804 is its robust amplification system, which provides a substantial power output of 130 watts per channel at 8 ohms. This ensures a dynamic sound reproduction that can fill large rooms with clarity and depth. The receiver supports multiple audio formats, including Dolby TrueHD and DTS-HD Master Audio, enabling it to decode high-definition audio tracks from Blu-ray discs, delivering a cinema-like experience in the home.

One notable feature of the SR804 is its advanced video processing capabilities. It supports HDMI 1.3, allowing for high-definition video signals up to 1080p. The receiver can upscale standard-definition content to high definition, ensuring that all media is presented at the best possible quality. Additionally, the SR804 features multiple HDMI inputs, accommodating various devices such as gaming consoles, Blu-ray players, and streaming devices.

The Onkyo SR804 is designed with users in mind, featuring an intuitive GUI (Graphical User Interface) that simplifies navigation and setup processes. The included remote control is comprehensive, providing easy access to settings and features without the need to navigate through complex menus. Moreover, the receiver supports Audyssey MultEQ technology, which analyzes the room's acoustics and optimizes audio performance, providing a tailored sound experience for various room sizes and layouts.

Another key characteristic of the Onkyo SR804 is its versatility in connectivity options. In addition to HDMI, it offers optical and coaxial digital inputs, along with analog inputs for a variety of audio sources. The receiver also features a zone 2 output, allowing users to set up a separate audio zone, perfect for multi-room audio installations.

The appealing design of the Onkyo SR804 combines functionality with aesthetics. Its sleek black finish and elegant display make it a fitting addition to any home theater setup.

In summary, the Onkyo SR804 is a feature-rich A/V receiver that excels in performance, versatility, and user-friendliness. Its powerful amplification, advanced audio and video technologies, and intuitive interface make it an ideal choice for anyone looking to enhance their home entertainment experience. Whether for movie nights, gaming, or streaming, the Onkyo SR804 stands out as a reliable and impressive component in any home theater setup.
Top Page Image Contents