Onkyo SR804 Specification, Amplifier Section, Video Section, Tuner Section, General

Page 95

Specification

Amplifier Section

Rated Power Output

North American:

105 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08% (FTC)

135 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.1% (FTC)

European:

7 ch 170 W at 6 ohms, 1 kHz, 1 ch driven (IEC) Others (Maximum Output Power):

7 ch 200 W at 6 ohms, 1 kHz, 1 ch driven (JEITA)

Dynamic Power 240 W + 240 W (3 , Front) 180 W + 180 W (4 , Front) 125 W + 125 W (8 , Front)

THD (Total Harmonic

 

Distortion)

0.08% (Power Rated)

Damping Factor

60 (Front, 1 kHz, 8)

Input Sensitivity and

200 mV/ 47 k(LINE)

Impedance

 

2.5 mV/47 k(PHONO MM)

Output Level and

200 mV/ 470 (REC OUT)

Impedance

Phono Overload

70 mV (MM 1 kHz, 0.5%)

Frequency Response

5 Hz–100 kHz/ +1 dB–3 dB (Direct mode)

Tone Control

±10 dB, 50 Hz (BASS)

 

±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio

106 dB (LINE, IHF-A)

 

80 dB (PHONO, IHF-A)

Speaker Impedance

4–16or 6–16

Video Section

Input Sensitivity/Output

Level and Impedance 1 Vp-p /75(Component and S-Video Y)

0.7Vp-p /75(Component Pb/Cb,Pr/Cr)

0.28Vp-p /75(S-Video C) 1 Vp-p /75(Composite)

Component Video

 

Frequency Response

5 Hz – 50 MHz

Tuner Section

 

 

 

FM

 

Tuning Frequency

 

Range

North American: 87.5 MHz– 107.9 MHz

 

Other: 87.5 MHz– 108.0 MHz

Usable Sensitivity

Stereo: 22.2 dBf (IHF)

 

Mono: 15.2 dBf (IHF)

Signal to Noise Ratio

Stereo: 67 dB (IHF-A)

 

Mono: 73 dB (IHF-A)

THD

Stereo: 0.5% (1 kHz)

 

Mono:0.3% (1 kHz)

Frequency Response

30 Hz–15 kHz / ±1 dB

Stereo Separation

40 dB (1 kHz)

AM

 

Tuning Frequency

 

Range

North American: 530 kHz–1710 kHz

 

European: 522 kHz–1611 kHz

 

Asian: 530/522 kHz–1710/1611 kHz

Usable Sensitivity

300 µV/m

Signal to Noise Ratio

40 dB

THD

0.70%

General

Power Supply

North American: AC 120 V, 60 Hz

 

European: AC 230 V, 50 Hz

 

Others: AC 120/220-240 V, 50/60 Hz

 

 

AC 220-230 V, 50/60 Hz

Power Consumption

North American: 7.5 A

 

European: 810 W

 

Others:

800 W

 

 

860 W

Standby Power

 

 

Consumption

North American: 0.2 W

 

Australian and European: 0.2 W

 

Others: 0.6 W

Dimensions

 

 

(W H D)

435 173.5 430 mm

 

17-1/8" 6-13/16" 16-15/16"

Weight

North American: 13.4 kg

 

 

29.5 lbs.

 

European: 13.6 kg

 

 

30.0 lbs.

 

Others:

13.4 kg

 

 

29.5 lbs.

Video Inputs

HDMI

IN1, IN2

Component

IN1, IN2, IN3

S-Video

DVD, VIDEO1, VIDEO2, VIDEO3,

 

VIDEO4

Composite

DVD, VIDEO1, VIDEO2, VIDEO3,

 

VIDEO4

Video Outputs

HDMI

OUT

Component

OUT

S-Video

MONITOR OUT, VIDEO1, VIDEO2

Composite

MONITOR OUT, VIDEO1, VIDEO2

Audio Inputs

Digital Inputs

Optical: 5 (1 on Front Panel)

 

Coaxial: 2

Analog Inputs

DVD (MULTICHANNEL), VIDEO1,

 

VIDEO2, VIDEO3, VIDEO4, TAPE, CD,

 

PHONO

Multichannel Input

7.1 ch (DVD)

Audio Outputs

Digital Output

Optical: 1

Analog Outputs

TAPE, VIDEO1, VIDEO2, ZONE2

Multichannel Pre

 

Outputs

7

Subwoofer Pre Outputs

1

Speaker Outputs

L, R, C, SL, SR, SBL, SBR

 

ZONE2 (L, R)

Phones

1

RS232

1

IR Input/Output

1/1

12 V Trigger Out

ZONE2

Specifications and features are subject to change without notice.

95

Image 95
Contents TX-SR804 TX-SR804E Avis Important Safety InstructionsPower PrecautionsFCC Information for User Supplied AccessoriesPrecautions Features Zone 2 Sub Room Multiroom CapabilityMain Room Contents Front Panel Getting to Know the AV ReceiverGetting to Know the AV Receiver Display XM antenna on North American model Rear PanelHdmi in 1, 2, and OUT Component Video in 1, 2,Video 1 IN/OUT and Video 2 IN/OUT RS232Voltage Selector on some models GND screwUsing the Remote Controller Remote ControllerInstalling the Batteries RECEIVER/TAPE Mode Remote ControllerAbout the Remote Controller Modes Standby button Listening Mode buttonsRemote Mode buttons Tape modeDVD Mode CD, MD, and CDR Modes HDD Mode Front left and right speakers Connecting Your SpeakersEnjoying Home Theater Connecting Your Speakers Connecting Your SpeakersStrip about 5/8 Speaker Connection PrecautionsConnecting the Speaker Cables Read the following before connecting your speakersAttach the FM antenna, as shown American Model Connecting AntennaConnecting the Indoor FM Antenna Connecting the AM Loop AntennaUsing a TV/FM Antenna Splitter Connecting AntennaConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaAV Connection Color Coding Connecting Your ComponentsAbout AV Connections Optical Digital JacksVideo Connection Formats Connecting Your ComponentsConnecting Audio and Video Signals to the AV Receiver Which Connections Should I Use?Hint Connecting a TV or ProjectorVideo Connection Audio ConnectionOr the other Connecting a DVD playerDVD player Hooking Up the Multichannel DVD InputDVD recorder Connecting a VCR or DVD Recorder for PlaybackConnecting a VCR or DVD Recorder for Recording Satellite, cable, set-top box, etc About Copyright Protection Connecting Components with HdmiAbout Hdmi Supported Audio FormatsMaking Hdmi Connections Video Signal Flow ChartAudio Signal Flow Chart Tape Tuner Phono Display Connecting a Camcorder, Games Console, or Other DeviceCD player Connecting a CD PlayerConnecting a Turntable StepPower amplifier Connecting a Cassette, CDR, MiniDisc, or DAT RecorderConnecting a Power Amplifier Asian models Connecting an HDD-compatible ComponentConnecting the Power Cords of Other Components European and someRemote Control Connecting Onkyo ComponentsConnecting the Power Cord Auto Power On/StandbyTurning On and Standby Set the Power switch to the on positionDo the automatic speaker setup-this is essential Turning On the AV ReceiverTurn on the AV receiver First Time SetupAutomatic Speaker Setup Connect the setup microphone to the Setup MIC jackMicrophone First Time SetupDisconnect the speaker setup Press EnterYou want to check, and then Checking the ResultsUse the Up and Down Buttons to select the item thatSetup closes Hdmi Video SetupFollowed by the Setup button Press the Setup buttonComponent Video Setup Digital Input menu appears Digital Audio Input SetupInput selector Default assignment Minimum Speaker Impedance Changing the Input DisplayYou must specify the TV system used in your area TV Format Setup Not North American modelsAM Frequency Step Setup on some models Hardware Setup menu appearsStart playback on the source component Select a listening mode and enjoyPlaying Your AV Components Basic AV Receiver OperationDisplaying AM/FM Radio Information Tuning into AM/FM Radio StationsListening to the Radio Listening to AM/FM StationsRDS Program Types PTY Using RDS European Model OnlyWhat is RDS? Listening to the RadioListening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY North American Models Only Setting the Satellite Radio ModeSelecting XM Satellite Radio Connecting the XM Mini-Tuner and Home DockUse the Tuning Up and Down Buttons to select Radio ID Signing Up for XM Satellite RadioSelecting XM Radio Channels Positioning the XM Antenna Displaying XM Radio InformationDeleting Presets Presetting AM, FM, and XM StationsSelecting Presets Input Channel Using the Multichannel DVD InputUsing the Multichannel DVD Input Multichannel DVD Input SettingsCommon Functions Adjusting Speaker LevelsMuting the AV Receiver Setting the Display Brightness Displaying Source Information Using the Sleep TimerUsing Headphones Common FunctionsSelecting on the AV Receiver Using the Listening ModesSelecting with the Remote Controller Selecting the Listening ModesDVD Using the Listening ModesSound is output by the front left and right speakers Use this mode with any stereo movie e.g., TV, DVD, VHSAbout the Listening Modes Onkyo Original DSP Modes This mode is designed for use with video gamesRecording Audio and Video from Separate Sources RecordingRecording the Input Source Submenu Onscreen Setup MenusAbout the Onscreen Setup Menus Main menuUse the Up and Down Buttons to select an option, Adjusting the Listening ModesAudio Adjust Menu Using the Re-EQ FunctionNeo6 Music Adjusting the Listening ModesTone Control Settings PL IIx and Neo6 Settings PL IIx Music 2 ch onlyMultiplex Dolby Digital SettingsMono/Multiplex Settings LFE Level SettingOptions for that input selector appear Default Listening ModesListening Mode Preset menu appears Speaker Setup Advanced SetupLow-Pass Filter for the LFE Channel Advanced SetupSubwoofer Mode Distance Speaker DistanceButtons to select each speaker Buttons to specifySpeaker Level Calibration Back speaker spacing THX Audio SetupButtons to select THX Audio Buttons to specify the surroundEqualizer Settings Press the Right Button to Open the character input screen Input SetupCharacter Edit Press the Down Button to Select Character, and thenPreferences IntelliVolumeVolume Setup OSD Position OSD SetupHdmi Setup Lock SetupChanging the AV Receiver’s Remote ID Changing the Remote Controller’s IDInput, and then press Enter Digital Input Signal FormatsDigital Format menu appears Buttons to select 2. DigitalCorrecting Sound and Picture Sync Press the Receiver Remote Mode buttonZone Connecting ZoneUsing an Amp in Zone Using Only Speakers in ZoneControlling Zone 2 from the AV receiver Powered Zone 2 SettingUsing Zone To Mute Zone Controlling Zone 2 with the Remote ControllerAdjusting the Volume for Zone Zone 2 Remote Mode buttonUsing a Multiroom Kit with Other Components Using a Multiroom Kit with a CabinetUsing a Multiroom Kit with Zone Controlling Other Components Entering Remote Control CodesControlling Other Components Resetting the Remote ControllerRemote Control Codes for Onkyo Components Connected via Resetting the Remote Mode ButtonsMenu CH +/-, TV CH +CH + EjectLearning Commands from Other Remote Controllers Deleting Macros Using MacrosMaking Macros Running MacrosTroubleshooting Troubleshooting Can’t select XM radio channels North Ameri- can model only Remote controller doesn’t workCan’t learn commands from another remote controller Sound changes when I connect my head- phonesTroubleshooting Tuner Section SpecificationAmplifier Section Video SectionOnkyo Europe UK Office Onkyo Europe Electronics GmbH

SR804 specifications

The Onkyo SR804 is a high-performance A/V receiver that has established itself as a favorite among home theater enthusiasts. Designed to deliver an immersive audio and visual experience, the SR804 boasts an array of features and technologies that enhance its performance and usability.

At the heart of the Onkyo SR804 is its robust amplification system, which provides a substantial power output of 130 watts per channel at 8 ohms. This ensures a dynamic sound reproduction that can fill large rooms with clarity and depth. The receiver supports multiple audio formats, including Dolby TrueHD and DTS-HD Master Audio, enabling it to decode high-definition audio tracks from Blu-ray discs, delivering a cinema-like experience in the home.

One notable feature of the SR804 is its advanced video processing capabilities. It supports HDMI 1.3, allowing for high-definition video signals up to 1080p. The receiver can upscale standard-definition content to high definition, ensuring that all media is presented at the best possible quality. Additionally, the SR804 features multiple HDMI inputs, accommodating various devices such as gaming consoles, Blu-ray players, and streaming devices.

The Onkyo SR804 is designed with users in mind, featuring an intuitive GUI (Graphical User Interface) that simplifies navigation and setup processes. The included remote control is comprehensive, providing easy access to settings and features without the need to navigate through complex menus. Moreover, the receiver supports Audyssey MultEQ technology, which analyzes the room's acoustics and optimizes audio performance, providing a tailored sound experience for various room sizes and layouts.

Another key characteristic of the Onkyo SR804 is its versatility in connectivity options. In addition to HDMI, it offers optical and coaxial digital inputs, along with analog inputs for a variety of audio sources. The receiver also features a zone 2 output, allowing users to set up a separate audio zone, perfect for multi-room audio installations.

The appealing design of the Onkyo SR804 combines functionality with aesthetics. Its sleek black finish and elegant display make it a fitting addition to any home theater setup.

In summary, the Onkyo SR804 is a feature-rich A/V receiver that excels in performance, versatility, and user-friendliness. Its powerful amplification, advanced audio and video technologies, and intuitive interface make it an ideal choice for anyone looking to enhance their home entertainment experience. Whether for movie nights, gaming, or streaming, the Onkyo SR804 stands out as a reliable and impressive component in any home theater setup.