Onkyo SR804 Input Setup, Character Edit, Press the Down Button to Select Character, and then

Advanced Setup—Continued

Input Setup

This section explains items on the “Input Setup” menu.

Character Edit

With this setting, you can enter a custom name for each input source and AM/FM radio preset. When the input source or radio preset is selected, its name will appear on the display.

1	Press the [RECEIVER] REMOTE
RECEIVER	MODE button, followed by the
	[SETUP] button.
	To name an AM or FM radio preset,
	select that preset first.
2	Use the Up and Down [ ]/[ ]
	buttons to select “4. Input Setup,”
	and then press [ENTER].
ENTER	The Input Setup menu appears.

5	Press the Down [	] button to
	select “Character,” and then
ENTER	press the Right [	] button to
	open the character input screen.
	4-1.Character Edit
	---------VIDEO1---------
	b.Character
	:	---+
	ABCDEFGHIJKLM
ENTER	NOPQRSTUVWXYZ
	abcdefghijklm
	nopqrstuvwxyz
	0123456789-.'
	()+*/=,:;!?_
		[Exit]
	+-------------+
6	Use the arrow [	]/[ ]/[ ]/[ ]

buttons to select a character, and then press [ENTER].

ENTER

Repeat this step to enter up to 10 characters.

If you enter a character by mistake:

Press the [RETURN] button to move

ENTER

the cursor back one place.

To correct a character:

3

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “Character Edit,” and then press [ENTER].

The Character Edit menu appears.

4-1.Character Edit

---------VIDEO1---------

a.Character Display :Yes

b.Character

:

Pressto Edit to Clear

1.Press the [ENTER] or [RETURN] button repeatedly to select the char- acter to be corrected.

2. Use the Left and Right []/[ ] buttons to select the new character, and then press [ENTER].

If the name contains less than 10 char- acters, select “Exit,” and then press [ENTER].

7	Press the [SETUP] button.
	Setup closes.

4

ENTER

ENTER

Use the Up and Down [ ]/[ ] buttons to select “Character Dis- play,” and use the Left and Right []/[ ] buttons to select:

No (Default): The default name is displayed.

Yes: The custom name is displayed.

For radio presets, the frequency is dis- played when No is selected.

To delete all the characters in a name:

In step 5, press the Left [] button instead of the Right [ ] button.

Notes:

•When the multichannel input is selected, the same name as for DVD is displayed.

•XM Radio presets cannot be named.

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

76