Onkyo TX-SR875, TX-SR805 instruction manual 100, Lock Setup

Page 100

Advanced Setup—Continued

•HDMI power control only works with HDMI-compat- ible components that support it and may not work properly with some components due to their settings or compatibility.

•When set to Enable, the AV receiver consumes more power.

•When set to Enable, the AV receiver enters Ready mode when set to Standby, and the READY indicator lights up instead of the STANDBY indicator (not North American model).

TV Control

Select Enable to control the AV receiver from an RIHD- compatible TV connected via HDMI.

Disable: TV Control disabled.

Enable: TV Control enabled.

Notes:

•Select Disable if your TV is incompatible or you’re note sure about its compatibility.

•The TV Control setting can be set only when the above Control and Power Control settings are both set to Enable.

Note:

•After changing the Control, Power Control, or TV Control setting, be sure to turn all of your compo- nents off and then back on again. Refer to the instruction manuals for your other components.

Lock Setup

Lock

With this setting, you can protect your settings by lock- ing the setup menus.

Locked: Setup menus locked. Unlocked: Setup menus unlocked.

When Locked is selected, only this Lock Setup item can be accessed.

100

Page 99 Page 101
Image 100
Page 99 Page 101
Contents TX-SR805 TX-SR875 Important Safety Instructions AvisPrecautions PowerFor models having a power cord with a polarized plug FCC Information for UserPrecautions For British modelsContents Features Supplied Accessories Make sure you have the following accessoriesPower cord THX Ultra2Main Room Multiroom CapabilityZone 2 Room Zone 3 Room Getting to Know the AV Receiver Front PanelGetting to Know the AV Receiver Display Rear Panel Digital Coaxial in 1, 2, Digital Optical in 1, 2, and OUTGND screw Front L/R, CENTER, Surr L/R, and Surr Back L/R SpeakersInstalling the Batteries Remote ControllerUsing the Remote Controller About the Remote Controller Modes Remote ControllerRECEIVER/TAPE Mode Listening Mode buttons Remote Mode buttonsTape mode Standby buttonDVD Mode CD/MD/CDR Modes Dock Mode Connecting Your Speakers Enjoying Home TheaterSubwoofer Surround back left and right speakersConnecting Your Speakers Connecting Your SpeakersSpeaker Connection Precautions Connecting the Speaker CablesFully insert the bare wire Strip about 5/8Bi-amping the Front Speakers Bi-amping Speaker HookupBridging the Front Speakers TX-SR875 only Bridged Speaker HookupConnecting Antennas Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting Antennas Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components Connecting Audio and Video Signals to the AV ReceiverHdmi Monitor Setting Set to Yes Which Connections Should I Use?Hdmi Monitor Setting Set to No TV, projector, etc Video Signal Flow Chart DVD player, etcAudio Signal Flow Chart DVD player, etc Audio Connection FormatsConnecting a TV or Projector Video ConnectionAudio Connection HintConnecting a DVD player Or the otherHooking Up the Multichannel Input DVD playerConnecting a VCR or DVR for Playback VCR or DVRConnecting a VCR or DVR for Recording Digital Optical OUTSatellite, cable, set-top box, etc Connecting Components with Hdmi About HdmiSupported Audio Formats About Copyright ProtectionAudio Signals Video SignalsMaking Hdmi Connections Connecting a Game Console Game ConsoleConnecting a Camcorder or Other AV Component Camcorder, etcConnecting a CD Player Connecting a TurntableStep CD playerConnecting a Power Amplifier Connecting a Cassette, CDR, MiniDisc, or DAT RecorderPower amplifier Connecting an RI Dock European modelConnecting Onkyo Components Connecting the Power CordMalfunction Some components may not support all Functions WorkSet the Power switch to the on position Do the automatic speaker setup-this is essentialTurning On the AV Receiver Turning On and StandbyFirst Time Setup Speaker SettingsFirst Time Setup Hdmi Monitor SetupButtons to select 1. Input/Output Assign, and then press EnterUsing the Hdmi OUT Button Buttons to select ResolutionCurrent setting is displayed Press the Hdmi OUT buttonHdmi Input Setup Hdmi Input menu appearsVersion OUTFirst Time Setup Component Video Input Setup Assign, and then pressInput/Output Assign menu AppearsChanging the Input Display Digital Input Setup These are the default assignmentsDigital Input menu appears Input selector Audio inputUsing the Digital Input Button Buttons to select an input selec Analog Input SetupTor Automatic Speaker Setup Audyssey MultEQ XT Using Audyssey MultEQ XTMeasurement Positions 1st measurement positionPlace the setup microphone at Connect it to the Setup MICWhen prompted, place the setup Turn on the AV receiverError Messages When the calculations are comDisconnect the setup micro Phone Plete, the following screenSpeaker Detect Error Writing ErrorOne of the front speakers has not been detected One of the surround speakers has not been detectedChanging the Speaker Settings Manually Using a Powered SubwooferReviewing the Results You want to review, and thenTV Format Setup Not North American models Buttons to select 6. MiscellaNeous, and then press Enter Buttons to select TV FormatAM Frequency Step Setup on some models Hardware Setup menu appearsButtons to select 7. Hardware Buttons to select AM FreqSettings Select a listening mode and enjoySee Using the Listening Modes on Playing Your AV ComponentsListening to the Radio Tuning into AM/FM Radio StationsListening to AM/FM Stations Tuning into Stations by Frequency Listening to the RadioDisplaying AM/FM Radio Information Followed by the D.TUN buttonUsing RDS not North American model What is RDS?RDS Program Types PTY This allows you to search RDS radio stations by type seeFinding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Selecting Presets Presetting AM/FM StationsDeleting Presets Adjusting Speaker Levels Setting the Display BrightnessCommon Functions Muting the AV ReceiverUsing the Sleep Timer Using HeadphonesCommon Functions Displaying Source InformationSelecting Audio Inputs Specifying the Digital Signal Format Using the Listening Modes Selecting with the Remote ControllerSelecting the Listening Modes Selecting on the AV ReceiverListening Modes Available for Each Source Format Using the Listening ModesAnalog and PCM Sources DSD, Dolby Digital, and Dolby Digital Plus Sources SacdTrueHD and DTS Sources DTS-ESDTS-HD Sources Use this mode with any stereo movie e.g., TV, DVD, VHS About the Listening ModesSound is output by the front left and right speakers DTS NEO6DSD Onkyo Original DSP Modes Recording the Input Source RecordingRecording from Different AV Sources Onscreen Setup Menus Menu MapMain menu SubmenuUsing the Late Night Function Adjusting the Listening ModesUsing the Re-EQ Function Audio Adjust Adjusting the Listening ModesTone Control Settings Multiplex/Mono Settings Direct SettingPLIIx/Neo6 Settings Listening Mode Presets Dolby Digital SettingsTheater-Dimensional Setting LFE Level SettingsAudio formats supported by that input selector appear Advanced Setup Speaker SetupSpeaker Settings Buttons to select SubwooferAdvanced Setup Crossover frequencyDouble Bass Low-Pass Filter for the LFE ChannelButtons to select Double Bass Speaker Distance Speaker Level Calibration Equalizer Settings THX Audio Setup Buttons to select THX Sub Source SetupWoofer, and use the Left IntelliVolume Name EditSync You want to give a custom nameWhen you’ve finished, use Satellite RadioSirius Parental Lock Arrow Buttons To display the following screenMiscellaneous Setup Volume SetupVolume Display Maximum VolumeOSD Setup Remote Control Hardware SetupZone 2 and Zone Analog Multich 100 Lock SetupLock Connecting Zone Connecting Your Zone 2 Speakers Directly to the AV receiverConnecting Your Zone 2 Speakers to an Amp in Zone Zone 2 and ZoneConnecting Your Zone 3 Speakers 102Zone 2 and Zone Zone 2 Video Output TX-SR875 onlyPowered Zone 2 Setting 103Using Zone 2 and Zone Zone 2/Zone 3 Out Settings104 On the remote controller, press 105Selecting an Input Source for Zones Turning Off ZonesAdjusting the Volume of Zones Muting Zones Adjusting the Tone of ZoneAdjusting the Balance of Zones 106Using a Multiroom Kit with Zone 2/3 Using a Multiroom Kit with a CabinetUsing a Multiroom Kit with Other Components 107Controlling Other Components Entering Remote Control Codes108 Resetting the Remote Controller Remote Control Codes for Onkyo Components Connected viaResetting the Remote Mode Buttons 109110 CH +/-, TV CH +CH + EjectLearning Commands 111Using Macros 112Making Macros Running MacrosTroubleshooting 113Troubleshooting 114115 116 Specifications 117118 SpecificationsAudio Outputs Control TerminalMemo 120 Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH Onkyo Europe UK Office

TX-SR805, TX-SR875 specifications

The Onkyo TX-SR875 and TX-SR805 are both powerful AV receivers that have garnered attention for their impressive sound quality and robust feature sets. These models are designed to meet the needs of home theater enthusiasts looking for high-performance audio and video experiences.

The TX-SR875 is a 7.1-channel network AV receiver known for its ability to deliver breathtaking audio fidelity. One of its standout features is its HD Theater 3D processing, which utilizes advanced surround sound algorithms to create a genuinely immersive listening experience. The receiver supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio, which are essential for modern Blu-ray and streaming services that aim to provide high-resolution sound.

In addition to its audio prowess, the TX-SR875 features a user-friendly on-screen interface, making navigation through various settings and configurations straightforward. The inclusion of HDMI 1.3a inputs ensures compatibility with the latest video sources, allowing for full 1080p video pass-through. Furthermore, the receiver's Faroudja DCDi technology enhances video quality by reducing artifacts and improving upscaling for standard-definition content.

The TX-SR805 is slightly more streamlined but still boasts impressive capabilities. This 7.1-channel receiver shares many similarities with the TX-SR875, including support for high-definition audio formats and HDMI connectivity. However, it focuses more on providing essential features at a more accessible price point. The TX-SR805 features the same audio processing technologies as its higher-end counterpart, ensuring a quality listening experience with support for multi-channel surround sound.

Both receivers are equipped with Onkyo's proprietary Advanced Music Optimizer technology, which enhances compressed audio files, offering improved sound quality from MP3s or streaming services. The receivers also come with Audyssey MultiEQ technology, which automatically calibrates speaker settings based on your specific room acoustics, ensuring optimal sound quality tailored to your home environment.

In summary, the Onkyo TX-SR875 and TX-SR805 AV receivers deliver high-quality audio and video performance, making them excellent choices for home theater setups. Their combination of cutting-edge processing technologies, multiple audio format support, and user-friendly features set them apart in the competitive landscape of AV receivers. Whether you choose the TX-SR875 for its premium features or the TX-SR805 for its value-oriented offerings, both models promise a superior home entertainment experience.
Top Page Image Contents