Zone 2 and Zone 3
In addition to your main listening room, you can also enjoy playback in two other rooms, or as we call them, Zone 2 and Zone 3. And, you can select a different source for each room.
Connecting Zone 2
There are two ways you can connect Zone 2 speakers:
1.Connect them directly to the AV receiver.
2.Connect them to an amp in Zone 2.
Connecting Your Zone 2 Speakers Directly to the AV receiver
This setup allows 5.1-channel playback in your main room and 2-channel stereo playback in Zone 2, with a different source in each room. This is called Powered Zone 2, as the Zone 2 speakers are powered by the AV receiver. Note that when Powered Zone 2 is turned off, you can enjoy 7.1-channel playback in your main room.
Hookup
•Connect your Zone 2 speakers to the AV receiver’s ZONE 2 L/R speaker terminals.
Main room | |
| TV |
| AV receiver |
ZONE2 R | ZONE2 L |
Zone 2
RL
You must set the Powered Zone 2 setting to Act (Activated) to use this setup (see page 103).
Notes:
•With this setup, the Zone 2 volume is controlled by the AV receiver.
•On the TX-SR875, Powered Zone 2 cannot be used if the Speaker Type is set to Bi-Amp or BTL (page 45).
Connecting Your Zone 2 Speakers to an Amp in Zone 2
This setup allows 7.1-channel playback in your main lis- tening room and 2-channel stereo playback in Zone 2, with a different source in each room.
Hookup
•Use an RCA audio cable to connect the AV receiver’s ZONE 2 PRE OUT L/R jacks to an analog audio input on your Zone 2 amp.
•Connect your Zone 2 speakers to the speaker termi- nals on your Zone 2 amp.
ZONE 2 ZONE 3
L
R
PRE OUT
Zone 2 | |
| IN |
R | L |
| Receiver/ |
| integrated amp |
Note:
•With the default settings, the Zone 2 volume must be set on the Zone 2 amp. If your Zone 2 amp has no vol- ume control, set the Zone 2 Out setting to Variable so that you can set the Zone 2 volume on the AV receiver (see page 104).
101
TX-SR805 TX-SR875
Avis
Important Safety Instructions
Power
Precautions
For models having a power cord with a polarized plug
FCC Information for User
For British models
Precautions
Contents
Features
Make sure you have the following accessories
Supplied Accessories
Power cord
THX Ultra2
Zone 2 Room Zone 3 Room
Multiroom Capability
Main Room
Front Panel
Getting to Know the AV Receiver
Getting to Know the AV Receiver
Display
Rear Panel
Digital Optical in 1, 2, and OUT
Digital Coaxial in 1, 2,
GND screw
Front L/R, CENTER, Surr L/R, and Surr Back L/R Speakers
Using the Remote Controller
Remote Controller
Installing the Batteries
RECEIVER/TAPE Mode
Remote Controller
About the Remote Controller Modes
Remote Mode buttons
Listening Mode buttons
Tape mode
Standby button
DVD Mode
CD/MD/CDR Modes
Dock Mode
Enjoying Home Theater
Connecting Your Speakers
Subwoofer
Surround back left and right speakers
Connecting Your Speakers
Connecting Your Speakers
Connecting the Speaker Cables
Speaker Connection Precautions
Fully insert the bare wire
Strip about 5/8
Bi-amping Speaker Hookup
Bi-amping the Front Speakers
Bridged Speaker Hookup
Bridging the Front Speakers TX-SR875 only
Connecting the Indoor FM Antenna
Connecting Antennas
Connecting the AM Loop Antenna
Attach the FM antenna, as shown American Model
Connecting an Outdoor FM Antenna
Connecting Antennas
Connecting an Outdoor AM Antenna
Using a TV/FM Antenna Splitter
About AV Connections
Connecting Your Components
Optical Digital Jacks
AV Connection Color Coding
Connecting Audio and Video Signals to the AV Receiver
Connecting Your Components
Hdmi Monitor Setting Set to Yes
Which Connections Should I Use?
TV, projector, etc Video Signal Flow Chart DVD player, etc
Hdmi Monitor Setting Set to No
Audio Signal Flow Chart DVD player, etc
Audio Connection Formats
Video Connection
Connecting a TV or Projector
Audio Connection
Hint
Or the other
Connecting a DVD player
DVD player
Hooking Up the Multichannel Input
VCR or DVR
Connecting a VCR or DVR for Playback
Digital Optical OUT
Connecting a VCR or DVR for Recording
Satellite, cable, set-top box, etc
About Hdmi
Connecting Components with Hdmi
Supported Audio Formats
About Copyright Protection
Making Hdmi Connections
Video Signals
Audio Signals
Game Console
Connecting a Game Console
Camcorder, etc
Connecting a Camcorder or Other AV Component
Connecting a Turntable
Connecting a CD Player
Step
CD player
Power amplifier
Connecting a Cassette, CDR, MiniDisc, or DAT Recorder
Connecting a Power Amplifier
European model
Connecting an RI Dock
Connecting the Power Cord
Connecting Onkyo Components
Malfunction Some components may not support all Functions
Work
Do the automatic speaker setup-this is essential
Set the Power switch to the on position
Turning On the AV Receiver
Turning On and Standby
Speaker Settings
First Time Setup
Hdmi Monitor Setup
First Time Setup
Buttons to select 1. Input/Output
Assign, and then press Enter
Buttons to select Resolution
Using the Hdmi OUT Button
Current setting is displayed
Press the Hdmi OUT button
Hdmi Input menu appears
Hdmi Input Setup
Version
OUT
First Time Setup
Assign, and then press
Component Video Input Setup
Input/Output Assign menu
Appears
Changing the Input Display
These are the default assignments
Digital Input Setup
Digital Input menu appears
Input selector Audio input
Using the Digital Input Button
Tor
Analog Input Setup
Buttons to select an input selec
Using Audyssey MultEQ XT
Automatic Speaker Setup Audyssey MultEQ XT
Measurement Positions
1st measurement position
Connect it to the Setup MIC
Place the setup microphone at
When prompted, place the setup
Turn on the AV receiver
When the calculations are com
Error Messages
Disconnect the setup micro Phone
Plete, the following screen
Writing Error
Speaker Detect Error
One of the front speakers has not been detected
One of the surround speakers has not been detected
Using a Powered Subwoofer
Changing the Speaker Settings Manually
Reviewing the Results
You want to review, and then
Buttons to select 6. Miscella
TV Format Setup Not North American models
Neous, and then press Enter
Buttons to select TV Format
Hardware Setup menu appears
AM Frequency Step Setup on some models
Buttons to select 7. Hardware
Buttons to select AM Freq
Select a listening mode and enjoy
Settings
See Using the Listening Modes on
Playing Your AV Components
Listening to AM/FM Stations
Tuning into AM/FM Radio Stations
Listening to the Radio
Listening to the Radio
Tuning into Stations by Frequency
Displaying AM/FM Radio Information
Followed by the D.TUN button
What is RDS?
Using RDS not North American model
RDS Program Types PTY
This allows you to search RDS radio stations by type see
Listening to Traffic News TP
Displaying Radio Text RT
Finding Stations by Type PTY
Deleting Presets
Presetting AM/FM Stations
Selecting Presets
Setting the Display Brightness
Adjusting Speaker Levels
Common Functions
Muting the AV Receiver
Using Headphones
Using the Sleep Timer
Common Functions
Displaying Source Information
Selecting Audio Inputs Specifying the Digital Signal Format
Selecting with the Remote Controller
Using the Listening Modes
Selecting the Listening Modes
Selecting on the AV Receiver
Analog and PCM Sources
Using the Listening Modes
Listening Modes Available for Each Source Format
Sacd
DSD, Dolby Digital, and Dolby Digital Plus Sources
DTS-ES
TrueHD and DTS Sources
DTS-HD Sources
About the Listening Modes
Use this mode with any stereo movie e.g., TV, DVD, VHS
Sound is output by the front left and right speakers
DTS NEO6
DSD
Onkyo Original DSP Modes
Recording from Different AV Sources
Recording
Recording the Input Source
Menu Map
Onscreen Setup Menus
Main menu
Submenu
Using the Re-EQ Function
Adjusting the Listening Modes
Using the Late Night Function
Tone Control Settings
Adjusting the Listening Modes
Audio Adjust
PLIIx/Neo6 Settings
Direct Setting
Multiplex/Mono Settings
Dolby Digital Settings
Listening Mode Presets
Theater-Dimensional Setting
LFE Level Settings
Audio formats supported by that input selector appear
Speaker Setup
Advanced Setup
Speaker Settings
Buttons to select Subwoofer
Crossover frequency
Advanced Setup
Buttons to select Double Bass
Low-Pass Filter for the LFE Channel
Double Bass
Speaker Distance
Speaker Level Calibration
Equalizer Settings
THX Audio Setup
Woofer, and use the Left
Source Setup
Buttons to select THX Sub
Name Edit
IntelliVolume
Sync
You want to give a custom name
Satellite Radio
When you’ve finished, use
Sirius Parental Lock
Arrow Buttons To display the following screen
Volume Setup
Miscellaneous Setup
Volume Display
Maximum Volume
OSD Setup
Zone 2 and Zone
Hardware Setup
Remote Control
Analog Multich
Lock
Lock Setup
100
Connecting Your Zone 2 Speakers Directly to the AV receiver
Connecting Zone
Connecting Your Zone 2 Speakers to an Amp in Zone
Zone 2 and Zone
102
Connecting Your Zone 3 Speakers
Zone 2 and Zone
Zone 2 Video Output TX-SR875 only
103
Powered Zone 2 Setting
104
Zone 2/Zone 3 Out Settings
Using Zone 2 and Zone
105
On the remote controller, press
Selecting an Input Source for Zones
Turning Off Zones
Adjusting the Tone of Zone
Adjusting the Volume of Zones Muting Zones
Adjusting the Balance of Zones
106
Using a Multiroom Kit with a Cabinet
Using a Multiroom Kit with Zone 2/3
Using a Multiroom Kit with Other Components
107
108
Entering Remote Control Codes
Controlling Other Components
Remote Control Codes for Onkyo Components Connected via
Resetting the Remote Controller
Resetting the Remote Mode Buttons
109
CH +/-, TV CH +
110
CH +
Eject
111
Learning Commands
112
Using Macros
Making Macros
Running Macros
113
Troubleshooting
114
Troubleshooting
115
116
117
Specifications
Specifications
118
Audio Outputs
Control Terminal
Memo
Onkyo U.S.A. Corporation
120
Onkyo Europe Electronics GmbH
Onkyo Europe UK Office