Onkyo TX-SR875, TX-SR805 Connecting Components with Hdmi, About Hdmi, Supported Audio Formats

Page 36

Connecting Your Components—Continued

Connecting Components with HDMI

About HDMI

Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichannel digital audio, or multichannel PCM).

The HDMI video stream (i.e., video signal) is compatible with DVI (Digital Visual Interface),*1 so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (This may not work with some TVs and displays, resulting in no picture.)

The AV receiver uses HDCP (High-bandwidth Digital Content Protection), so only HDCP-compatible components will display a picture.

The AV receiver’s HDMI interface is based on the following standard:

High-Definition Multimedia Interface Specification Informational Version 1.3a

Supported Audio Formats

•2-channel linear PCM (32–192 kHz, 16/20/24 bit)

•Multichannel linear PCM (7.1 ch, 32–192 kHz)

•Bitstream (Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD, DTS-HD Master Audio) Your DVD player must be able to output these formats from its HDMI OUT.

About Copyright Protection

The AV receiver supports HDCP (High-bandwidth Digital Content Protection),*2 a copy-protection system for digital video signals. Other devices connected to the AV receiver via HDMI must also support HDCP.

Use a commercially available HDMI cable (supplied with some components) to connect the AV receiver’s HDMI OUT to the HDMI input on your TV or projector.

*1 DVI (Digital Visual Interface): The digital display interface standard set by the DDWG*3 in 1999.

*2 HDCP (High-bandwidth Digital Content Protection): The video encryption technology developed by Intel for HDMI/DVI. It’s designed to protect video content and requires a HDCP-compatible device to display the encrypted video.

*3 DDWG (Digital Display Working Group): Lead by Intel, Compaq, Fujitsu, Hewlett Packard, IBM, NEC, and Silicon Image, this open industry group’s objective is to address the industry's requirements for a digital connectivity specification for high-performance PCs and digital displays.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents
TX-SR805 TX-SR875 Important Safety Instructions AvisPrecautions PowerFor models having a power cord with a polarized plug FCC Information for UserPrecautions For British modelsContents Features Supplied Accessories Make sure you have the following accessoriesPower cord THX Ultra2Multiroom Capability Main RoomZone 2 Room Zone 3 Room Getting to Know the AV Receiver Front PanelGetting to Know the AV Receiver Display Rear Panel Digital Coaxial in 1, 2, Digital Optical in 1, 2, and OUTGND screw Front L/R, CENTER, Surr L/R, and Surr Back L/R SpeakersRemote Controller Installing the BatteriesUsing the Remote Controller Remote Controller About the Remote Controller ModesRECEIVER/TAPE Mode Listening Mode buttons Remote Mode buttonsTape mode Standby buttonDVD Mode CD/MD/CDR Modes Dock Mode Connecting Your Speakers Enjoying Home TheaterSubwoofer Surround back left and right speakersConnecting Your Speakers Connecting Your SpeakersSpeaker Connection Precautions Connecting the Speaker CablesFully insert the bare wire Strip about 5/8Bi-amping the Front Speakers Bi-amping Speaker HookupBridging the Front Speakers TX-SR875 only Bridged Speaker HookupConnecting Antennas Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting Antennas Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components Connecting Audio and Video Signals to the AV ReceiverHdmi Monitor Setting Set to Yes Which Connections Should I Use?Hdmi Monitor Setting Set to No TV, projector, etc Video Signal Flow Chart DVD player, etcAudio Signal Flow Chart DVD player, etc Audio Connection FormatsConnecting a TV or Projector Video ConnectionAudio Connection HintConnecting a DVD player Or the other Hooking Up the Multichannel Input DVD playerConnecting a VCR or DVR for Playback VCR or DVRConnecting a VCR or DVR for Recording Digital Optical OUTSatellite, cable, set-top box, etc Connecting Components with Hdmi About HdmiSupported Audio Formats About Copyright ProtectionVideo Signals Audio SignalsMaking Hdmi Connections Connecting a Game Console Game ConsoleConnecting a Camcorder or Other AV Component Camcorder, etcConnecting a CD Player Connecting a TurntableStep CD playerConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting a Power AmplifierPower amplifier Connecting an RI Dock European modelConnecting Onkyo Components Connecting the Power CordMalfunction Some components may not support all Functions WorkSet the Power switch to the on position Do the automatic speaker setup-this is essentialTurning On the AV Receiver Turning On and StandbyFirst Time Setup Speaker SettingsFirst Time Setup Hdmi Monitor SetupButtons to select 1. Input/Output Assign, and then press EnterUsing the Hdmi OUT Button Buttons to select ResolutionCurrent setting is displayed Press the Hdmi OUT buttonHdmi Input Setup Hdmi Input menu appearsVersion OUTFirst Time Setup Component Video Input Setup Assign, and then pressInput/Output Assign menu AppearsChanging the Input Display Digital Input Setup These are the default assignmentsDigital Input menu appears Input selector Audio inputUsing the Digital Input Button Analog Input Setup Buttons to select an input selecTor Automatic Speaker Setup Audyssey MultEQ XT Using Audyssey MultEQ XTMeasurement Positions 1st measurement positionPlace the setup microphone at Connect it to the Setup MICWhen prompted, place the setup Turn on the AV receiverError Messages When the calculations are comDisconnect the setup micro Phone Plete, the following screenSpeaker Detect Error Writing ErrorOne of the front speakers has not been detected One of the surround speakers has not been detectedChanging the Speaker Settings Manually Using a Powered SubwooferReviewing the Results You want to review, and thenTV Format Setup Not North American models Buttons to select 6. MiscellaNeous, and then press Enter Buttons to select TV FormatAM Frequency Step Setup on some models Hardware Setup menu appearsButtons to select 7. Hardware Buttons to select AM FreqSettings Select a listening mode and enjoySee Using the Listening Modes on Playing Your AV ComponentsTuning into AM/FM Radio Stations Listening to the RadioListening to AM/FM Stations Tuning into Stations by Frequency Listening to the RadioDisplaying AM/FM Radio Information Followed by the D.TUN buttonUsing RDS not North American model What is RDS?RDS Program Types PTY This allows you to search RDS radio stations by type seeDisplaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP Presetting AM/FM Stations Selecting PresetsDeleting Presets Adjusting Speaker Levels Setting the Display BrightnessCommon Functions Muting the AV ReceiverUsing the Sleep Timer Using HeadphonesCommon Functions Displaying Source InformationSelecting Audio Inputs Specifying the Digital Signal Format Using the Listening Modes Selecting with the Remote ControllerSelecting the Listening Modes Selecting on the AV ReceiverUsing the Listening Modes Listening Modes Available for Each Source FormatAnalog and PCM Sources DSD, Dolby Digital, and Dolby Digital Plus Sources SacdTrueHD and DTS Sources DTS-ESDTS-HD Sources Use this mode with any stereo movie e.g., TV, DVD, VHS About the Listening ModesSound is output by the front left and right speakers DTS NEO6DSD Onkyo Original DSP Modes Recording Recording the Input SourceRecording from Different AV Sources Onscreen Setup Menus Menu MapMain menu SubmenuAdjusting the Listening Modes Using the Late Night FunctionUsing the Re-EQ Function Adjusting the Listening Modes Audio AdjustTone Control Settings Direct Setting Multiplex/Mono SettingsPLIIx/Neo6 Settings Listening Mode Presets Dolby Digital SettingsTheater-Dimensional Setting LFE Level SettingsAudio formats supported by that input selector appear Advanced Setup Speaker SetupSpeaker Settings Buttons to select SubwooferAdvanced Setup Crossover frequencyLow-Pass Filter for the LFE Channel Double BassButtons to select Double Bass Speaker Distance Speaker Level Calibration Equalizer Settings THX Audio Setup Source Setup Buttons to select THX SubWoofer, and use the Left IntelliVolume Name EditSync You want to give a custom nameWhen you’ve finished, use Satellite RadioSirius Parental Lock Arrow Buttons To display the following screenMiscellaneous Setup Volume SetupVolume Display Maximum VolumeOSD Setup Hardware Setup Remote ControlZone 2 and Zone Analog Multich Lock Setup 100Lock Connecting Zone Connecting Your Zone 2 Speakers Directly to the AV receiverConnecting Your Zone 2 Speakers to an Amp in Zone Zone 2 and ZoneConnecting Your Zone 3 Speakers 102Zone 2 and Zone Zone 2 Video Output TX-SR875 onlyPowered Zone 2 Setting 103Zone 2/Zone 3 Out Settings Using Zone 2 and Zone104 On the remote controller, press 105Selecting an Input Source for Zones Turning Off ZonesAdjusting the Volume of Zones Muting Zones Adjusting the Tone of ZoneAdjusting the Balance of Zones 106Using a Multiroom Kit with Zone 2/3 Using a Multiroom Kit with a CabinetUsing a Multiroom Kit with Other Components 107Entering Remote Control Codes Controlling Other Components108 Resetting the Remote Controller Remote Control Codes for Onkyo Components Connected viaResetting the Remote Mode Buttons 109110 CH +/-, TV CH +CH + EjectLearning Commands 111Using Macros 112Making Macros Running MacrosTroubleshooting 113Troubleshooting 114115 116 Specifications 117118 SpecificationsAudio Outputs Control TerminalMemo 120 Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH Onkyo Europe UK Office
Top Page Image Contents