Getting to Know the AV Receiver—Continued
cDIGITAL INPUT button (53)
Used to assign digital inputs to input selectors.
d LISTENING MODE [
]/[ ] buttons (71)
Select the Onkyo original listening modes.
ePOWER switch (44)
American models do not have this switch.
This is the main power switch. When set to OFF, the AV receiver is completely shutdown. It must be set to ON to set the AV receiver to On or Standby.
For detailed information, see the pages in parentheses.
1Speaker/channel indicators (76)
Indicate the speaker configuration and channels used by the current input source.
–
: A box is displayed for each speaker that’s set in the Speaker Configuration. No box appears for speakers that are set to No or None.
The following abbreviations indicate which audio channels are included in the current input signal.
–FL: Front left
–C: Center
–FR: Front right
–SL: Surround left
–LFE: Subwoofer (Low Frequency Effects)
–SR: Surround right
–SBL: Surround back left
–SB: Surround back
–SBR: Surround back right
2BTL indicator (45) (TX-SR875 only)
Lights up when the Speaker Type setting is set to BTL for bridged front speaker operation.
3ZONE 2 indicator (105)
Lights up when Powered Zone 2 is being used.
4Listening mode and format indicators (71)
Show the selected listening mode and audio input signal format.
5Tuning indicators (63)
RDS (not North American model) (65):
Lights up when tuned to a radio station that supports RDS (Radio Data System).
AUTO (63): Lights up when Auto Tuning mode is selected for AM or FM radio. Goes off when Man- ual Tuning mode is selected.
TUNED (63): Lights up when tuned to a radio sta- tion.
FM STEREO (63): Lights up when tuned to a ste- reo FM station.
6SLEEP indicator (69)
Lights up when the Sleep function has been set.
7Audyssey indicator (55)
Lights up during automatic speaker setup.
8Headphone indicator (69)
Lights up when a pair of headphones are plugged into the PHONES jack.
9Message area
Displays various information.
0Audio input indicators (70)
Indicate the type of audio input that’s selected as the audio source: HDMI, ANALOG, or DIGITAL.
AVolume level (62)
Displays the volume level.
BMUTING indicator (68)
Flashes while the AV receiver is muted.
TX-SR805 TX-SR875
Avis
Important Safety Instructions
FCC Information for User
Precautions
Power
For models having a power cord with a polarized plug
For British models
Precautions
Contents
Features
THX Ultra2
Supplied Accessories
Make sure you have the following accessories
Power cord
Zone 2 Room Zone 3 Room
Multiroom Capability
Main Room
Front Panel
Getting to Know the AV Receiver
Getting to Know the AV Receiver
Display
Rear Panel
Front L/R, CENTER, Surr L/R, and Surr Back L/R Speakers
Digital Coaxial in 1, 2,
Digital Optical in 1, 2, and OUT
GND screw
Using the Remote Controller
Remote Controller
Installing the Batteries
RECEIVER/TAPE Mode
Remote Controller
About the Remote Controller Modes
Standby button
Listening Mode buttons
Remote Mode buttons
Tape mode
DVD Mode
CD/MD/CDR Modes
Dock Mode
Surround back left and right speakers
Connecting Your Speakers
Enjoying Home Theater
Subwoofer
Connecting Your Speakers
Connecting Your Speakers
Strip about 5/8
Speaker Connection Precautions
Connecting the Speaker Cables
Fully insert the bare wire
Bi-amping Speaker Hookup
Bi-amping the Front Speakers
Bridged Speaker Hookup
Bridging the Front Speakers TX-SR875 only
Attach the FM antenna, as shown American Model
Connecting Antennas
Connecting the Indoor FM Antenna
Connecting the AM Loop Antenna
Using a TV/FM Antenna Splitter
Connecting Antennas
Connecting an Outdoor FM Antenna
Connecting an Outdoor AM Antenna
AV Connection Color Coding
Connecting Your Components
About AV Connections
Optical Digital Jacks
Which Connections Should I Use?
Connecting Your Components
Connecting Audio and Video Signals to the AV Receiver
Hdmi Monitor Setting Set to Yes
Audio Connection Formats
Hdmi Monitor Setting Set to No
TV, projector, etc Video Signal Flow Chart DVD player, etc
Audio Signal Flow Chart DVD player, etc
Hint
Connecting a TV or Projector
Video Connection
Audio Connection
Or the other
Connecting a DVD player
DVD player
Hooking Up the Multichannel Input
VCR or DVR
Connecting a VCR or DVR for Playback
Digital Optical OUT
Connecting a VCR or DVR for Recording
Satellite, cable, set-top box, etc
About Copyright Protection
Connecting Components with Hdmi
About Hdmi
Supported Audio Formats
Making Hdmi Connections
Video Signals
Audio Signals
Game Console
Connecting a Game Console
Camcorder, etc
Connecting a Camcorder or Other AV Component
CD player
Connecting a CD Player
Connecting a Turntable
Step
Power amplifier
Connecting a Cassette, CDR, MiniDisc, or DAT Recorder
Connecting a Power Amplifier
European model
Connecting an RI Dock
Work
Connecting Onkyo Components
Connecting the Power Cord
Malfunction Some components may not support all Functions
Turning On and Standby
Set the Power switch to the on position
Do the automatic speaker setup-this is essential
Turning On the AV Receiver
Speaker Settings
First Time Setup
Assign, and then press Enter
First Time Setup
Hdmi Monitor Setup
Buttons to select 1. Input/Output
Press the Hdmi OUT button
Using the Hdmi OUT Button
Buttons to select Resolution
Current setting is displayed
OUT
Hdmi Input Setup
Hdmi Input menu appears
Version
First Time Setup
Appears
Component Video Input Setup
Assign, and then press
Input/Output Assign menu
Changing the Input Display
Input selector Audio input
Digital Input Setup
These are the default assignments
Digital Input menu appears
Using the Digital Input Button
Tor
Analog Input Setup
Buttons to select an input selec
1st measurement position
Automatic Speaker Setup Audyssey MultEQ XT
Using Audyssey MultEQ XT
Measurement Positions
Turn on the AV receiver
Place the setup microphone at
Connect it to the Setup MIC
When prompted, place the setup
Plete, the following screen
Error Messages
When the calculations are com
Disconnect the setup micro Phone
One of the surround speakers has not been detected
Speaker Detect Error
Writing Error
One of the front speakers has not been detected
You want to review, and then
Changing the Speaker Settings Manually
Using a Powered Subwoofer
Reviewing the Results
Buttons to select TV Format
TV Format Setup Not North American models
Buttons to select 6. Miscella
Neous, and then press Enter
Buttons to select AM Freq
AM Frequency Step Setup on some models
Hardware Setup menu appears
Buttons to select 7. Hardware
Playing Your AV Components
Settings
Select a listening mode and enjoy
See Using the Listening Modes on
Listening to AM/FM Stations
Tuning into AM/FM Radio Stations
Listening to the Radio
Followed by the D.TUN button
Tuning into Stations by Frequency
Listening to the Radio
Displaying AM/FM Radio Information
This allows you to search RDS radio stations by type see
Using RDS not North American model
What is RDS?
RDS Program Types PTY
Listening to Traffic News TP
Displaying Radio Text RT
Finding Stations by Type PTY
Deleting Presets
Presetting AM/FM Stations
Selecting Presets
Muting the AV Receiver
Adjusting Speaker Levels
Setting the Display Brightness
Common Functions
Displaying Source Information
Using the Sleep Timer
Using Headphones
Common Functions
Selecting Audio Inputs Specifying the Digital Signal Format
Selecting on the AV Receiver
Using the Listening Modes
Selecting with the Remote Controller
Selecting the Listening Modes
Analog and PCM Sources
Using the Listening Modes
Listening Modes Available for Each Source Format
Sacd
DSD, Dolby Digital, and Dolby Digital Plus Sources
DTS-ES
TrueHD and DTS Sources
DTS-HD Sources
DTS NEO6
Use this mode with any stereo movie e.g., TV, DVD, VHS
About the Listening Modes
Sound is output by the front left and right speakers
DSD
Onkyo Original DSP Modes
Recording from Different AV Sources
Recording
Recording the Input Source
Submenu
Onscreen Setup Menus
Menu Map
Main menu
Using the Re-EQ Function
Adjusting the Listening Modes
Using the Late Night Function
Tone Control Settings
Adjusting the Listening Modes
Audio Adjust
PLIIx/Neo6 Settings
Direct Setting
Multiplex/Mono Settings
LFE Level Settings
Listening Mode Presets
Dolby Digital Settings
Theater-Dimensional Setting
Audio formats supported by that input selector appear
Buttons to select Subwoofer
Advanced Setup
Speaker Setup
Speaker Settings
Crossover frequency
Advanced Setup
Buttons to select Double Bass
Low-Pass Filter for the LFE Channel
Double Bass
Speaker Distance
Speaker Level Calibration
Equalizer Settings
THX Audio Setup
Woofer, and use the Left
Source Setup
Buttons to select THX Sub
You want to give a custom name
IntelliVolume
Name Edit
Sync
Arrow Buttons To display the following screen
When you’ve finished, use
Satellite Radio
Sirius Parental Lock
Maximum Volume
Miscellaneous Setup
Volume Setup
Volume Display
OSD Setup
Zone 2 and Zone
Hardware Setup
Remote Control
Analog Multich
Lock
Lock Setup
100
Zone 2 and Zone
Connecting Zone
Connecting Your Zone 2 Speakers Directly to the AV receiver
Connecting Your Zone 2 Speakers to an Amp in Zone
Zone 2 Video Output TX-SR875 only
Connecting Your Zone 3 Speakers
102
Zone 2 and Zone
103
Powered Zone 2 Setting
104
Zone 2/Zone 3 Out Settings
Using Zone 2 and Zone
Turning Off Zones
On the remote controller, press
105
Selecting an Input Source for Zones
106
Adjusting the Volume of Zones Muting Zones
Adjusting the Tone of Zone
Adjusting the Balance of Zones
107
Using a Multiroom Kit with Zone 2/3
Using a Multiroom Kit with a Cabinet
Using a Multiroom Kit with Other Components
108
Entering Remote Control Codes
Controlling Other Components
109
Resetting the Remote Controller
Remote Control Codes for Onkyo Components Connected via
Resetting the Remote Mode Buttons
Eject
110
CH +/-, TV CH +
CH +
111
Learning Commands
Running Macros
Using Macros
112
Making Macros
113
Troubleshooting
114
Troubleshooting
115
116
117
Specifications
Control Terminal
118
Specifications
Audio Outputs
Memo
Onkyo Europe UK Office
120
Onkyo U.S.A. Corporation
Onkyo Europe Electronics GmbH