Network Settings, Using Remote Playback

Using Remote Playback


1	Start Windows Media Player 12.
	Before remote playback, setup on Windows Media
	Player 12 is required.

2	On the product, press NET/USB to select the
	server screen.

A list of media server appears.

Tip

•The NETWORK indicator on the product’s display lights up. When it flashes, confirm the network connection.

Note

•While the music files on another media server are being played, remote playback cannot be used. Stop playback on another media server.

3 On Windows Media Player 12, right-click on music file.

Right-click menu appears. For selecting another media server, select media server from “Other Libraries” menu on Windows Media Player 12.

4 Select the product from right-click menu.

“Play to” window appears and playback on the prod- uct starts. Operations during remote playback can be made from “Play to” window of Windows 7 on your personal computer. During remote playback, opera- tions (such as Playback, Pause, Fast Forward, Fast Rewind, Previous, Next, Repeat, Random) cannot be made on the product.

Remote Playback

My favorite song 1

Artist name

My favorite album

1:00:00

MP3 128kbps 44.1kHz

Tip

•To stop playback and return to the previous menu during remote playback, press RETURN on the product or remote controller. To stop playback during remote play- back, press Stop [2] on the remote controller.

5 Adjusting the Volume

You can adjust the volume of your AV receiver by adjusting the volume bar in the “Remote playback” window. The default maximum volume for the AV receiver is 82 (0dB). If you wish to change this, enter the maximum volume value from the Web Setup in your browser.

The volume value of the remote window and the vol- ume value of the AV receiver may not always match. Adjustments you make to the volume in the AV receiver will not be reflected in the “Remote play- back” window.

Network Settings

Note

•When modifying network settings, after modifying it is neces- sary to execute “Save”.

This section explains how to configure the AV receiver’s network settings manually.

If your router’s DHCP server is enabled, you don’t need to change any of these settings, as the AV receiver is set use DHCP to configure itself automatically by default (i.e., DHCP is set to Enable). If, however, your router’s DHCP server is disabled, for example, you’re using static IP addresses, you’ll need to configure these settings yourself, in which case, a knowledge of Ethernet networking is essential.

What’s DHCP?

DHCP (Dynamic Host Configuration Protocol) is used by routers, computers, the AV receiver, and other devices to automatically configure themselves on a network.

What’s DNS?

The DNS (Domain Name System) translates domain names into IP addresses. For example, when you enter a domain name such as www.onkyousa.com in your Web browser, before accessing the site, your browser uses DNS to translate this into an IP address, in this case 63.148.251.142.

1 Press RECEIVER followed by SETUP.

The main menu appears onscreen.

Tip

•If the main menu doesn’t appear, make sure the appropri- ate external input is selected on your TV.

2 Use q/wto select “Hardware Setup”, and then press ENTER.

The “Hardware Setup” menu appears.

7.Hardware Setup

1.Remote ID

2.Multi Zone

3.Tuner

4.HDMI

5.Auto Power Down

6.Network

7.Firmware Update

3 Use q/wto select “Network”, and then press

ENTER.

The “Network” screen appears.

7-6. Network
MAC Address	xx : xx : xx − yy : yy : yy
DHCP	Enable
IP Address	aaa.bbb.ccc.ddd
Subnet Mask	aaa.bbb.ccc.ddd
Gateway	aaa.bbb.ccc.ddd
DNS Server	aaa.bbb.ccc.ddd
Proxy URL	8080
Proxy Port	8080

Windows and the Windows logo are trademarks of the

Microsoft group of companies.