Onkyo TX-NR1008 instruction manual About Hdmi, Supported Audio Formats, About Copyright Protection

Page 99

About HDMI

Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video compo- nents. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video, and up to eight channels of digital audio (2-channel PCM, multichan- nel digital audio, and multichannel PCM).

The HDMI video stream (i.e., video signal) is compatible with DVI (Digital Visual Interface)*1, so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (This may not work with some TVs and displays, resulting in no picture.)

The AV receiver uses HDCP (High-bandwidth Digital Content Protection)*2, so only HDCP-compatible components can display the picture.

The AV receiver’s HDMI interface is based on the following:

Audio Return Channel, 3D, x.v.Color, Deep Color, Lip Sync, DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD, Dolby Digital Plus, DSD and Multichannel PCM

Supported Audio Formats

2-channel linear PCM (32–192 kHz, 16/20/24 bit)

Multichannel linear PCM (up to 7.1 ch, 32–192 kHz, 16/20/24 bit)

Bitstream (DSD, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio)

Your Blu-ray Disc/DVD player must also support HDMI output of the above audio formats.

About Copyright Protection

The AV receiver supports HDCP (High-bandwidth Digital Content Protection)*2, a copy-protection system for digital video signals. Other devices connected to the AV receiver via HDMI must also support HDCP.

*1 DVI (Digital Visual Interface): The digital display interface standard set by the DDWG*3 in 1999.

*2 HDCP (High-bandwidth Digital Content Protection): The video encryption technology developed by Intel for HDMI/DVI. It’s designed to protect video content and requires a HDCP-compatible device to display the encrypted video.

*3 DDWG (Digital Display Working Group): Lead by Intel, Compaq, Fujitsu, Hewlett Packard, IBM, NEC, and Silicon Image, this open industry group’s objective is to address the industry’s requirements for a digital connectivity specification for high-performance PCs and digital displays.

Note

The HDMI video stream is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable. (Note that DVI connections only carry video, so you’ll need to make a separate connection for audio.) However, reliable operation with such an adapter is not guaranteed. In addition, video signals from a PC are not supported.

The HDMI audio signal (sampling rate, bit length, etc.) may be restricted by the connected source component. If the picture is poor or there’s no sound from a component connected via HDMI, check its setup. Refer to the connected component’s instruction manual for details.

En

99

Image 99
Contents Advanced Operations Controlling iPod & Other Components Introduction ConnectionsAway from the rear panel or wall, creating a flue-like Always consider the environmental issues and follow10 cm 4 at the rear. The rear edge of the shelf or Board above the apparatus shall be set 10 cmPrecautions Aiming the Remote Controller Supplied AccessoriesUsing the Remote Controller Installing the BatteriesContents Processing Features40 FM/AM Presets excluding North American mod- els AmplifierAmplifier is prohibited THX Select2 PlusFront & Rear Panels Front PanelCBL/SAT , Game , PC , AUX , Tuner , TV/CD AUX Input jacks HDMI, VIDEO, Audio L/R and Digital 18 Return button Setup MIC jackDisplay Phones jack Zone 2, Zone 3 and OFF buttonsFront L/R, CENTER, Surr L/R UREMOTE Control jack Universal Port jack Ethernet portRear Panel Digital in Coaxial and Optical jacksControlling the AV Receiver Remote ControllerEnjoying Home Theater About Home TheaterSpeaker Connection Precautions Connecting the AV ReceiverConnecting Your Speakers Speaker ConfigurationScrew-type speaker terminals Strip 1/2 to 5/8 12 to 15 mm Connecting the Speaker CablesUsing Dipole Speakers Connecting Powered SubwoofersBi-amping the Front Speakers B c e Power amplifier I g Connecting a Power AmplifierHdmi cable About AV ConnectionsConnected image with AV components AV Cables and JacksConnecting Your Components with Hdmi Jack Signal Components AssignableAudio return channel ARC function Front Rear Connecting Your ComponentsStep Connecting Onkyo uComponentsHow to record the video Remote ControlAC Inlet Connecting AntennaConnecting the Power Cord North American European and Asian Taiwan models ModelsVideo Connection Formats Which Connections Should I Use?Audio Connection Formats Monitor Out setting set to AnalogPC in Analog RGB input signal is output at 720p resolution Depends on the Audio TV Out settingTurning Off Standby indicatorTurning On/Off the AV Receiver Turning OnPlaying the Connected Component Selecting the Language Used for the Onscreen Setup MenusSetting the Display Brightness Basic OperationsCh playback Using the Sleep TimerMuting the AV Receiver Selecting Speaker LayoutChanging the Input Display Using the Home MenuUsing Activities to Start Easy Macros Using HeadphonesEnter Audyssey MultEQ Room Correction and Speaker SetupUsing Audyssey MultEQ First measurement positionError Messages Using a Powered Subwoofer Changing the Speaker Settings ManuallyListening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioUsing RDS excluding North American and Taiwan models Presetting FM/AM StationsFinding Stations by Type PTY Listening to Traffic News TPRDS program types PTY Connecting a Recording Component RecordingAV Recording Using the Listening Modes Listening Mode ButtonsSelecting Listening Modes Speaker Layout About Listening ModesExplanatory Notes Input SourceListening Modes Audio Resolution AudioDescription Input Speaker Source Layout DTS-HD High DTS-HD MasterListening Mode Description Input Speaker Source Layout Onkyo-Original DSP Listening Modes Menu Advanced SetupOn-screen Setup Menus Common Procedures in Setup MenuInput/Output Assign Monitor OutOUT Main Resolution Changing Monitor Out setting manuallyBD/DVD, VCR/DVR, CBL/SAT, GAME, PC TV/CD, PHONO, Port Here are the default assignmentsHdmi Input Component Video Input` in 1, Digital Audio InputAnalog Audio Input BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX TV/CD, PHONO, PortSpeaker Settings Speaker SetupLevel Calibration Speaker DistanceEqualizer Settings THX Audio SetupBGC Audio Adjust Multiplex/MonoDolby Theater-Dimensional Audyssey DSXLFE Level Dynamic EQ Source SetupDynamic Volume AudysseyIntelliVolume SyncName Edit Wide Mode*1*3 Picture AdjustGame Mode To correct a characterEdge Enhancement*2*4 Resolution*2*4Picture Mode*1 Film Mode*2*4*5Listening Mode Preset Miscellaneous Hardware SetupTuner Sirius Settings North American modelsAuto Power Down Firmware UpdateNetwork Speaker Levels Lock SetupUsing the Audio Settings Tone Control SettingsRe-EQ Audyssey SettingsLate Night Music OptimizerSetting the Incoming Digital Signal Fixed Mode Audio SelectorAudio Selector Connecting the AV Receiver About NETNetwork Requirements Listening to Other Internet Radio Click on the Preset Internet Radio tabListening to Internet Radio Listening to vTuner Internet RadioItems on the Internet Radio Top Menu Registering Presets*1Station and Song Presets Playing Music Files on a ServerWindows Media Player 11 Setup AAC Supported Audio File FormatsWMA WAVAbout Dlna Windows Media Player 12 SetupRemote Playback from Media Server/ Personal Computer Server RequirementsUsing Remote Playback Network SettingsDhcp About USB USB Mass Storage Device RequirementsPlaying Music Files on a USB Device Random Playback Multi Zone Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver Connecting Your Zone 2 Speakers to an Amp in ZoneConnect your Zone 3 speakers to the AV receiver’s Front Connecting Your Zone 3 Speakers Directly to the AV receiverConnecting Your Zone 3 Speakers to an Amp in Zone Zone 3 12V TriggerSetting the Multi Zone Setting the Powered Zone 2/3TOR Using Zone 2/3Controlling Zone 2/3 with the Remote Controller Controlling Zone 2/3 from the AV receiverMuting Zones Adjusting the Volume for ZonesAdjusting the Tone and Balance of Zone Using a Multiroom Kit with Zone 2/3Using a Multiroom Kit with Other Components Using a Multiroom Kit with a CabinetControlling iPod Connecting the iPod Directly to the USB PortStandard Mode control Extended Mode controlConnecting an Onkyo Dock Models sold are different depending on the regionOnkyo Dock Cable UP-A1 Dock Using the Onkyo DockWith the RI Control Controlling Your iPodRI Dock Without the RI ControlE/rENTER PLAYLISTe/r Available buttonsOnkyo Dock Buttons UP-A1 Dock UDockPreprogrammed Remote Control Codes Looking up for Remote Control CodeControlling Other Components Select Skip, and then press Enter Use q/wto select Search by model numberVia network, and then press Enter Or if you are not sure about the exact modelRemote Mode BD/DVD Entering Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Enter the appropriate remote control code forControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller You can reset the remote controller to its default settingsCH + Disc + Components ButtonsCassettetape deck TV VOL q/wActivities Setup Learning Commands To learn more commands, repeat steps 2Message for transfer will appear Deleting Macros Using Normal MacrosDeleting Learning Commands Running MacrosCan’t turn on the AV receiver TroubleshootingStandby indicator flashes red There’s no sound, or it’s very quietOnly the center speaker produces sound There’s no sound with a certain signal formatCan’t select the Pure Audio listening mode About DTS signalsOn-screen menus don’t appear Remote controller doesn’t workThere’s no picture There’s no picture from a source connected to an HdmiStand-by power consumption Can’t learn commands from another remote controllerCan’t access the server or Internet radio Can’t access the music files on a USB deviceNent Video Monitor OUT How do I change the language of a multiplex sourceUfunctions don’t work CBL/SAT, GAME, or AUX inputVideo Section SpecificationsAmplifier Section Tuner Section GeneralOthers Audio OutputsAbout Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with p connection Operate with the remote controller How to connect and setupConfirm the connecting and setting Confirm the settingsVideo Resolution Chart OutputOutput 103 MemoOnkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH