Mitsubishi Electronics HD1000 user manual Installation menu, Feature menu

Page 25

2. INSTALLATION menu

 

ITEM

SETTING

FUNCTION

LAMP MODE

STANDARD

Select this option when you want to view images in a well-lit room.

 

LOW

Select to moderate the intensity of the lamp. The fan operating sound is reduced

 

 

 

and the lamp lifetime becomes longer.

LAMP TIME (LOW)

****H

This item shows a lamp operating time (hour) when LAMP MODE is LOW.

 

 

 

• When the LAMP MODE is STANDARD, this item shows a longer lamp operat-

 

 

 

ing time than the actual time. (See page 31 for the interval of lamp replace-

 

 

 

ment. )

AUTO POWER ON

ON / OFF

When ON is chosen, the lamp is automatically lit when the power cord is plugged

 

 

 

in the wall outlet. Choose ON when using the projector mounted on the ceiling.

 

 

 

• The projector is in the stand-by mode when the lamp is off. Use the remote

 

 

 

control to turn on the lamp.

AUTO POWER OFF

OFF / 5 - 60min

Use to set the time elapsed before the projector enters the stand-by mode when

 

 

 

there is no signal input from the source.

SPLASH SCREEN

ON / OFF

Choose ON to display the splash screen when the power is turned on.

BACK COLOR

BLUE / BLACK

Use to change the color of the screen that appears when no signal is supplied.

IMAGE REVERSE

OFF

Select when viewing images from the front with the projector installed on the

 

 

 

floor.

 

MIRROR

Select when viewing images projected from the behind of the screen with the

 

 

 

projector installed on the floor.

 

INVERT

Select when viewing images projected from the behind of the screen with the

 

 

 

projector installed on the ceiling.

 

MIRROR INVERT

Select when viewing images from the front with the projector installed on the

 

 

 

ceiling.

TRIGGER OUT

ON / OFF

Choose ON to output the trigger output signal (12 V) from the TRIGGER terminal

 

 

 

when the lamp illuminates.

TEST PATTERN CROSS HATCH

 

Select to show the test cross hatch pattern.

 

When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about one minute after turn-on.

When the lamp mode is switched, the projected image may flicker. This is not a product malfunction.

Do not change the setting of LAMP MODE frequently.

To cancel the test pattern, press any button.

3. FEATURE menu

 

 

ITEM

SETTING

FUNCTION

 

ASPECT

AUTO

Select to change the aspect ratio automatically depending on the input signal.

 

4:3

 

Select to project images with an aspect ratio of 4:3.

 

 

16:9

 

Select to project images with an aspect ratio of 16:9. (Linearly stretched.)

 

ZOOM1

Select to enlarge and project images of CinemaScope size.

 

 

ZOOM2

Select to enlarge and project images of Vista size.

 

 

STRETCH

Select to enlarge to 16:9 and project of the images with an aspect ratio of 4:3.

 

 

 

 

(Non-linearly stretched.)

 

 

REAL

Select to project images in their original size as input. Not available when the

 

 

 

 

keystone adjustment is applied.

 

PASSWORD FUNCTION

 

 

 

Use to enable or cancel the password lock. See page 30 for details.

 

MENU POSITION

2 options

Use to change the position of the menu.

 

CINEMA MODE

AUTO

The film mode will be automatically activated when a film source signal is input.

 

OFF

The film mode will not be activated.

 

VIDEO SIGNAL

8 options

When AUTO is selected, the appropriate video format is automatically selected

 

 

 

 

depending on the input signal. If the image isn’t displayed correctly, select the

 

 

 

 

desired video format manually.

 

SET UP

AUTO

Select AUTO for normal use. When LANGUAGE is not set to

and 480i,

 

 

 

 

480p or TV60 signal is input, the SET UP changes to 7.5% automatically.

 

OFF

Select to make black lighter.

 

 

3.75% / 7.5%

Select to make black intense.

 

 

 

 

 

• When 7.5% is chosen, the brightness is decreased by the set-up cancel

 

 

 

 

function for the U.S. Choose OFF when the image is dark.

 

SCART INPUT

ON / OFF

Choose ON when connecting the projector with a device equipped with the

 

 

 

 

SCART terminal that can output RGB signal. SCART terminal is used mainly

 

 

 

 

in Europe. Choose OFF normally. (Available only for the input signal from the

 

 

 

 

COMPUTER IN/COMPONENT VIDEO IN terminal.)

 

LANGUAGE

10 languages

Use to select the language used in the menus.

 

RESET ALL

OK

 

 

Use to reset the settings of the menu (excluding PASSWORD FUNCTION and

 

 

 

 

 

LANGUAGE) to the factory setting values.

 

When SCART INPUT is set to ON, normal computer signals aren’t projected.

Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device equipped with the SCART terminal.

Some AV devices equipped with the SCART terminal aren’t compatible with this projector.

It may take a little while to carry out RESET ALL in the FEATURE menu.

ENGLISH

EN-25

Image 25
Contents HD1000 Risk of Electric Shock Do not Open When using the projector in EuropeContents EN-4 Important safeguardsDo not unplug the power cord during operation Do not keep using the damaged projectorNever remove the cabinet Do not modify this equipment Do not face the projector lens to the sunInserting the batteries into the remote control Checking accessoriesPreparing your projector Control area Terminal panel OverviewUSB terminal Trigger terminalUsing the picture quality adjusting buttons Remote controlAdjustment foot Front Lamp cover Adjustment feet Rear Preparing your projectorOperational range of the remote control Using the remote controlReception angle Front of projector Rear of projectorSetting up the screen Setting up your projectorBasic setup Adjusting the projection angleTo cancel the menu With the Installation menu See page 24 for menu settingTrigger terminal When the aspect ratio of the screen is Setting up your projectorWhen the aspect ratio of the image is Screen size and projection distanceViewing video images Connecting the projector to video equipmentBasic home theater system connection PreparationConnecting to a DVD player or Hdtv decoder Connecting to a video player, etcWhen a TV tuner or VCR is connected Viewing video imagesConnection for video equipment having a DVI-D terminal Connection for video equipment having an Hdmi terminalPlugging in the power cord Projecting images To stop projecting When projected images are distorted to a trapezoidFollowing cases How to change the settings Setting the aspect ratioWith the remote control With the Feature menuPlugging the power cord Connecting the projector to a computerViewing computer images For analog connectionProjecting images Example of the setting procedure for external output When connecting to a notebook computerViewing computer images Auto Position buttonMenu operation Available settings in the menus How to set the menusMenu operation Image menuFeature menu Installation menuTo store the settings Signal menuTo enable the stored image quality settings AV memoryTo adjust the brightness Contrast and Brightness Adjusting projected imagesTo adjust the color Color and Tint To sharpen or soften the projected image SharpnessTo adjust the tone of white Color Temp Adjusting projected imagesAbout color temperature To adjust the ratio of change in brightness Gamma ModeLPF To adjust the vertical positionPassword function Advanced featuresTo enable the password function To cancel the password functionReplacing the lamp Interval of lamp replacementCleaning of the lens Cleaning of the projector and the ventilation slotsReset of the lamp operation time Replacing the lampProblem TroubleshootingSolution No image appears on the screenNo image appears on the screen Problem Solution TroubleshootingProblem Solution Images are not displayed correctlyKensington Lock Others Problem SolutionPower Status Condition Possible Solution IndicatorsNormal condition Abnormal conditionSpecifications Dimension drawings unit mmReplacement part Option/not included in the box ConnectorsSpecifications VLT-HC910LPMitsubishi Projector Contact Information

HD1000 specifications

The Mitsubishi Electronics HD1000 is a powerful and versatile projector designed to meet the needs of professionals and educators alike. Known for its remarkable image quality and advanced features, the HD1000 has become a popular choice in various settings, including conference rooms, classrooms, and home theaters.

One of the standout features of the HD1000 is its high-definition resolution. With a native resolution of 1920x1080 pixels, this projector delivers stunning images with exceptional clarity and detail. This makes it ideal for displaying presentations, videos, and other visual content, ensuring that every detail can be seen by the audience.

The brightness of the HD1000 is another notable characteristic, boasting a luminous output of up to 3000 ANSI lumens. This high brightness level allows it to perform well even in well-lit environments, making it suitable for daylight use in larger rooms. Additionally, the contrast ratio of 10,000:1 enhances the overall visual experience, providing rich colors and deep blacks that contribute to an immersive viewing experience.

Mitsubishi has incorporated advanced technological features in the HD1000 to enhance its functionality. The projector supports 3D content, allowing users to present dynamic visuals that engage and captivate audiences. The seamless integration of 3D technology is ideal for educational institutions where interactive and engaging content is crucial for effective learning.

Another prominent feature is the projector's connectivity options. The HD1000 includes multiple input ports, such as HDMI, VGA, and composite video, ensuring compatibility with various devices, including laptops, Blu-ray players, and gaming consoles. This flexibility makes it easy to switch between different sources without the hassle of complicated setups.

Furthermore, the HD1000 is designed with energy efficiency in mind. It employs eco-friendly technologies that reduce power consumption when not in active use, extending the lifespan of the lamp and minimizing operational costs. This is an essential feature for businesses and schools looking to reduce their environmental footprint while ensuring reliability and performance.

In terms of user experience, the HD1000 features an intuitive interface and remote control, allowing for effortless operation and adjustments. Its compact and lightweight design ensures portability, making it easy to transport and set up in various locations.

In summary, the Mitsubishi Electronics HD1000 is a versatile and feature-rich projector that excels in delivering high-definition visuals. With its impressive brightness, advanced connectivity, and energy-efficient design, it serves as an excellent choice for any professional setting or educational institution.