Mitsubishi Electronics HD1000 user manual Advanced features, Password function

Page 30

Advanced features

Password function

This projector is equipped with the password function that is designed for prevention of theft and wrong op- eration by children and restriction on operation by other than specified users. The password function has two modes as follows.

DISPLAY INPUT ...........When the projector is turned

on, the startup screen (or splash screen) will appear and stay on the screen until the password is entered. When the password is entered, the startup screen will switch to the regular operation screen.

MENU ACCESS............All the buttons except for the

POWER button on the projector are disabled. (The buttons on the remote control are enabled.) You can use this mode as a measure of prevention of wrong operation by children and restriction on operation by other than specified users.

To enable the password function:

1.

Display the FEATURE menu.

2.

Press the

or button to select PASSWORD

 

FUNCTION.

 

3.

Press the

button to change the mode among DIS-

PLAY INPUT and MENU ACCESS.

•When the password has already been set, the mode won’t be changed. In such cases, press the ENTER button to cancel the password function and try again.

4.Press the ENTER button.

•The screen for setting the password function will appear.

DISPLAY INPUT

LOCK

OK

 

 

 

 

 

 

 

UNLOCK

OK

 

 

5.Press the ENTER button.

• The screen for entering a password will appear.

 

 

PASSWORD

 

 

 

 

 

 

CONFIRM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

O K

 

CANCEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.

Press the

or

button to select a number from 0

 

to 9.

 

 

 

 

 

 

7.

Press the

button.

 

 

 

 

• You can set the next digit.

8.Repeat steps 6 and 7 to set a four-digit password.

9.Enter the password again for confirmation using the same steps.

10.Select OK, and press the ENTER button.

•If the entered passwords don’t match, an error message will appear.

•To cancel the procedure, select CANCEL and press the ENTER button.

•You can cancel the procedure by pressing the MENU button alternatively.

To cancel the password function:

1. Display the FEATURE menu.

2. Press the or button to select PASSWORD FUNCTION.

3.Press the ENTER button.

•The screen for canceling the password function will appear.

DISPLAY INPUT

LOCK

OK

 

 

 

 

 

 

 

UNLOCK

OK

 

 

4.Press the ENTER button.

•The screen for entering the password will appear.

 

 

PASSWORD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

O K

 

CANCEL

 

 

 

 

 

 

 

 

 

 

5.

Press the

or button to select a number from 0

 

to 9.

 

 

 

 

 

 

6.

Press the

button.

 

 

 

 

• You can set the next digit.

7.Repeat steps 5 and 6 to enter the four-digit password.

8. Press the button, select OK, and press the ENTER button.

•If you enter a wrong password, an error message will appear.

• To cancel the procedure, press the button, select CANCEL, and press the ENTER button.

•You can cancel the procedure by pressing the MENU button alternatively.

Important:

•If you forget your password, hold down the MENU and ENTER buttons on the control panel at the same time about three seconds to cancel the password function.

EN-30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents HD1000 When using the projector in Europe Risk of Electric Shock Do not OpenContents Important safeguards EN-4Never remove the cabinet Do not modify this equipment Do not keep using the damaged projectorDo not unplug the power cord during operation Do not face the projector lens to the sunChecking accessories Inserting the batteries into the remote controlPreparing your projector USB terminal OverviewControl area Terminal panel Trigger terminalAdjustment foot Front Lamp cover Adjustment feet Rear Remote controlUsing the picture quality adjusting buttons Preparing your projectorReception angle Using the remote controlOperational range of the remote control Front of projector Rear of projectorBasic setup Setting up your projectorSetting up the screen Adjusting the projection angleWith the Installation menu See page 24 for menu setting To cancel the menuTrigger terminal When the aspect ratio of the image is Setting up your projectorWhen the aspect ratio of the screen is Screen size and projection distanceBasic home theater system connection Connecting the projector to video equipmentViewing video images PreparationWhen a TV tuner or VCR is connected Connecting to a video player, etcConnecting to a DVD player or Hdtv decoder Viewing video imagesConnection for video equipment having an Hdmi terminal Connection for video equipment having a DVI-D terminalPlugging in the power cord Projecting images When projected images are distorted to a trapezoid To stop projectingFollowing cases With the remote control Setting the aspect ratioHow to change the settings With the Feature menuViewing computer images Connecting the projector to a computerPlugging the power cord For analog connectionProjecting images Viewing computer images When connecting to a notebook computerExample of the setting procedure for external output Auto Position buttonMenu operation Menu operation How to set the menusAvailable settings in the menus Image menuInstallation menu Feature menuTo enable the stored image quality settings Signal menuTo store the settings AV memoryTo adjust the color Color and Tint Adjusting projected imagesTo adjust the brightness Contrast and Brightness To sharpen or soften the projected image SharpnessAbout color temperature Adjusting projected imagesTo adjust the tone of white Color Temp To adjust the ratio of change in brightness Gamma ModeTo adjust the vertical position LPFTo enable the password function Advanced featuresPassword function To cancel the password functionInterval of lamp replacement Replacing the lampReset of the lamp operation time Cleaning of the projector and the ventilation slotsCleaning of the lens Replacing the lampSolution TroubleshootingProblem No image appears on the screenProblem Solution TroubleshootingNo image appears on the screen Problem Solution Images are not displayed correctlyOthers Problem Solution Kensington LockNormal condition IndicatorsPower Status Condition Possible Solution Abnormal conditionDimension drawings unit mm SpecificationsSpecifications ConnectorsReplacement part Option/not included in the box VLT-HC910LPMitsubishi Projector Contact Information

HD1000 specifications

The Mitsubishi Electronics HD1000 is a powerful and versatile projector designed to meet the needs of professionals and educators alike. Known for its remarkable image quality and advanced features, the HD1000 has become a popular choice in various settings, including conference rooms, classrooms, and home theaters.

One of the standout features of the HD1000 is its high-definition resolution. With a native resolution of 1920x1080 pixels, this projector delivers stunning images with exceptional clarity and detail. This makes it ideal for displaying presentations, videos, and other visual content, ensuring that every detail can be seen by the audience.

The brightness of the HD1000 is another notable characteristic, boasting a luminous output of up to 3000 ANSI lumens. This high brightness level allows it to perform well even in well-lit environments, making it suitable for daylight use in larger rooms. Additionally, the contrast ratio of 10,000:1 enhances the overall visual experience, providing rich colors and deep blacks that contribute to an immersive viewing experience.

Mitsubishi has incorporated advanced technological features in the HD1000 to enhance its functionality. The projector supports 3D content, allowing users to present dynamic visuals that engage and captivate audiences. The seamless integration of 3D technology is ideal for educational institutions where interactive and engaging content is crucial for effective learning.

Another prominent feature is the projector's connectivity options. The HD1000 includes multiple input ports, such as HDMI, VGA, and composite video, ensuring compatibility with various devices, including laptops, Blu-ray players, and gaming consoles. This flexibility makes it easy to switch between different sources without the hassle of complicated setups.

Furthermore, the HD1000 is designed with energy efficiency in mind. It employs eco-friendly technologies that reduce power consumption when not in active use, extending the lifespan of the lamp and minimizing operational costs. This is an essential feature for businesses and schools looking to reduce their environmental footprint while ensuring reliability and performance.

In terms of user experience, the HD1000 features an intuitive interface and remote control, allowing for effortless operation and adjustments. Its compact and lightweight design ensures portability, making it easy to transport and set up in various locations.

In summary, the Mitsubishi Electronics HD1000 is a versatile and feature-rich projector that excels in delivering high-definition visuals. With its impressive brightness, advanced connectivity, and energy-efficient design, it serves as an excellent choice for any professional setting or educational institution.
Top Page Image Contents