Mitsubishi Electronics HD1000 user manual Kensington Lock, Others Problem Solution

Page 35

Others

Problem

Solution

 

 

The exhaust vents

• This air comes out after cooling the inside of the projector. You may feel hot, but this is

emit warm air.

not a malfunction.

The menu can’t be

• The microcomputers inside the projector may be wrongly operating because of noise.

Press the POWER button to turn off the lamp and unplug the power cord from the

used.

wall outlet. Wait about 10 minutes, plug the power cord in, and try again.

 

 

 

“TEMPERATURE!!” is

• This indication appears when the ambient temperature rises high. When the ambient

displayed.

temperature stays high, the lamp goes out.

 

Eliminate any causes of the rise in the ambient temperature.

 

• This indication appears when the air inlet or outlet grille is blocked. When they are kept

 

blocked, the lamp goes out.

 

Remove the objects blocking the air inlet or outlet grille. Clean the filter, if clogged.

 

 

The mark appears.

• This mark appears when ineffective operation is carried out. This isn’t a product

 

malfunction.

 

 

The remote control

• Check that the batteries are loaded in the remote control or the batteries are not weak.

doesn’t function easily

(See page 6.)

or at all.

• Check that the remote control sensor isn’t exposed to direct sunlight or fluorescent

 

light. (See page 9.)

 

• Use the remote control within its operation range. (See page 9.)

 

• Use the remote control at least 10 cm away from the projector.

 

 

The buttons on the

• PASSWORD FUNCTION in the FEATURE menu has been set to MENU ACCESS to en-

control panel (except

able the password lock.

for the POWER button)

Cancel the password lock or contact the person in charge of management of the

don’t function.

projector. (See page 30.)

 

 

 

Abnormal sound is

• Because the color wheel spins at a high speed, metallic sounds may be heard in rare

heard.

occasions. Such symptom is not a malfunction.

 

 

If the following problem occurs after the lamp is replaced, check the following first.

Problem

Solution

 

 

The projector does not

• Fit the lamp cover securely. (See pages 31 and 32.)

turn on.

•

Reset the lamp operating time. (See page 32.)

The STATUS indicator

•

Reset the lamp operating time. (See page 32.)

blinks.

 

 

 

 

 

ENGLISH

Kensington Lock

This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector. Please contact Kensington Technology Group below.

Kensington Technology Group 2855 Campus Drive

San Mateo, CA 94403, U.S.A.

Phone: +1- (650)572-2700

Fax: +1- (650)572-9675

EN-35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents HD1000 Risk of Electric Shock Do not Open When using the projector in EuropeContents EN-4 Important safeguardsDo not face the projector lens to the sun Do not keep using the damaged projectorDo not unplug the power cord during operation Never remove the cabinet Do not modify this equipmentPreparing your projector Checking accessoriesInserting the batteries into the remote control Trigger terminal OverviewControl area Terminal panel USB terminalPreparing your projector Remote controlUsing the picture quality adjusting buttons Adjustment foot Front Lamp cover Adjustment feet RearFront of projector Rear of projector Using the remote controlOperational range of the remote control Reception angleAdjusting the projection angle Setting up your projectorSetting up the screen Basic setupTrigger terminal With the Installation menu See page 24 for menu settingTo cancel the menu Screen size and projection distance Setting up your projectorWhen the aspect ratio of the screen is When the aspect ratio of the image isPreparation Connecting the projector to video equipmentViewing video images Basic home theater system connectionViewing video images Connecting to a video player, etcConnecting to a DVD player or Hdtv decoder When a TV tuner or VCR is connectedConnection for video equipment having a DVI-D terminal Connection for video equipment having an Hdmi terminalPlugging in the power cord Projecting images Following cases When projected images are distorted to a trapezoidTo stop projecting With the Feature menu Setting the aspect ratioHow to change the settings With the remote controlFor analog connection Connecting the projector to a computerPlugging the power cord Viewing computer imagesProjecting images Auto Position button When connecting to a notebook computerExample of the setting procedure for external output Viewing computer imagesMenu operation Image menu How to set the menusAvailable settings in the menus Menu operationFeature menu Installation menuAV memory Signal menuTo store the settings To enable the stored image quality settingsTo sharpen or soften the projected image Sharpness Adjusting projected imagesTo adjust the brightness Contrast and Brightness To adjust the color Color and TintTo adjust the ratio of change in brightness Gamma Mode Adjusting projected imagesTo adjust the tone of white Color Temp About color temperatureLPF To adjust the vertical positionTo cancel the password function Advanced featuresPassword function To enable the password functionReplacing the lamp Interval of lamp replacementReplacing the lamp Cleaning of the projector and the ventilation slotsCleaning of the lens Reset of the lamp operation timeNo image appears on the screen TroubleshootingProblem SolutionImages are not displayed correctly TroubleshootingNo image appears on the screen Problem Solution Problem SolutionKensington Lock Others Problem SolutionAbnormal condition IndicatorsPower Status Condition Possible Solution Normal conditionSpecifications Dimension drawings unit mmVLT-HC910LP ConnectorsReplacement part Option/not included in the box SpecificationsMitsubishi Projector Contact Information

HD1000 specifications

The Mitsubishi Electronics HD1000 is a powerful and versatile projector designed to meet the needs of professionals and educators alike. Known for its remarkable image quality and advanced features, the HD1000 has become a popular choice in various settings, including conference rooms, classrooms, and home theaters.

One of the standout features of the HD1000 is its high-definition resolution. With a native resolution of 1920x1080 pixels, this projector delivers stunning images with exceptional clarity and detail. This makes it ideal for displaying presentations, videos, and other visual content, ensuring that every detail can be seen by the audience.

The brightness of the HD1000 is another notable characteristic, boasting a luminous output of up to 3000 ANSI lumens. This high brightness level allows it to perform well even in well-lit environments, making it suitable for daylight use in larger rooms. Additionally, the contrast ratio of 10,000:1 enhances the overall visual experience, providing rich colors and deep blacks that contribute to an immersive viewing experience.

Mitsubishi has incorporated advanced technological features in the HD1000 to enhance its functionality. The projector supports 3D content, allowing users to present dynamic visuals that engage and captivate audiences. The seamless integration of 3D technology is ideal for educational institutions where interactive and engaging content is crucial for effective learning.

Another prominent feature is the projector's connectivity options. The HD1000 includes multiple input ports, such as HDMI, VGA, and composite video, ensuring compatibility with various devices, including laptops, Blu-ray players, and gaming consoles. This flexibility makes it easy to switch between different sources without the hassle of complicated setups.

Furthermore, the HD1000 is designed with energy efficiency in mind. It employs eco-friendly technologies that reduce power consumption when not in active use, extending the lifespan of the lamp and minimizing operational costs. This is an essential feature for businesses and schools looking to reduce their environmental footprint while ensuring reliability and performance.

In terms of user experience, the HD1000 features an intuitive interface and remote control, allowing for effortless operation and adjustments. Its compact and lightweight design ensures portability, making it easy to transport and set up in various locations.

In summary, the Mitsubishi Electronics HD1000 is a versatile and feature-rich projector that excels in delivering high-definition visuals. With its impressive brightness, advanced connectivity, and energy-efficient design, it serves as an excellent choice for any professional setting or educational institution.
Top Page Image Contents