Mitsubishi Electronics user manual Installation Summary, ・Connecting DX-VS1UE with PC

Page 11

III.DX-VS1UE Initial Configuration

1.Installation Summary

•Connect ethernet cable and supply power to DX-VS1UE on local network for configuration.

•Install a setup program of DX-VS1UE in a PC on local network.

•Assign an IP address to DX-VS1UE and set administrator condition.

•Set user condition.

2.Connecting

•Connect ethernet cable to the ethernet port on the rear.

•Connect power supply unit to a power supply port on the rear..

•Confirm that the LEDs of ethernet port keep blinking.

・Connecting DX-VS1UE with PC

You may use crossover cable (red colored one) to directly connect DX-VS1UE to a PC.

Crossover Cable

Connect DX-VS1UE directly to PC through LAN ports.

*If you use the crossover cable (red colored one) enclosed and follow the method illustrated in the above diagram, but you cannot access, try to connect through HUB using direct cable. Otherwise, set 10Mbps to the communcation speed in terms of network interface configuration of your PC, if it’s possible. In case you cannot access even though you tried the above mentioned method, some- thing can be wrong with PC(including OS setting). Please contact with makers which provide your PC or OS.

Note in connecting cable to terminal block

When you connect cable to terminal block, you should peel off the cover of cable by 1.5cm and insert the cable by 2cm into the terminal block.(communication., sensor input, alarm and etc). The white line on cover of power cable indicates “+”.

10

DX-VS1UE User’s Manual

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DX-VS1 Table of Contents DX-VS1UE User’s Manual Features What is DX-VS1UE?For DX-VS1UE For PC to access DX-VS1UEDescription Amount Remarks Confirmation of the AccessoriesDX-VS1UE View and Description Front View and Description Connector RemarksPTZ/DVR/COM Rear View and Description Connector name RemarksLEDs of Ethernet port Description of DIP SwitchesRight-hand side DIP swith is not available ・Connecting DX-VS1UE with PC Installation SummaryDX-VS1UE User’s Manual DX-VS1UE User’s Manual ・The circuit diagram of a sensor terminal Assigning IP Address and setting Administrator Condition Installing DX-VS1UE Setup ProgramCrossover Cable ・Setting Administrator ConditionsMAC Address Media Access Control Address IP AddressConnecting RS-232C cable Connecting a digital recorder to DX-VS1UEConnecting BNC cable PTZ/DVR/CO Composition of a screen Starting Web browserDVR Check E-Mail Options Mail Event ConfigurationApplication Configuration FTP directory configuration Check Points for E-mail Sending ProblemSelect Serial Port FTP event configurationPan/tilt/zoom Configuration Transmission Performance of E-mail and FTPNew Group New PresetMode Configuration Select Attached Device Serial Port ConfigurationManual Setting Serial Port SelectionPTZ Command for Manual Script Motion Detection Threshold Alarm Parameters for E-mail / FTP ApplicationDevice Type for Input Ports Current State for Input PortsCustomizing Alarm PresetWeb Server TCP Port Video Server TCP PortLogin Page Editing When the changed settings are reflected?Network Detailed Specifications of DX-VS1UEHardware Video and CompressionMisc functions and I/O Serial connection with digital recorder Frequently Asked Questions Installation and operation of DX-VS1UE DX-VS1UE User’s Manual DX-VS1UE User’s Manual DX-VS1UE User’s Manual
Top Page Image Contents