Mitsubishi Electronics DX-VS1 Transmission Performance of E-mail and FTP, FTP event configuration

Page 23

(6) FTP event configuration

Administrator can set transmission conditions, image resolution, and file name. The setting method of image resolution, filename, and transmission conditions of FTP is the same as that of e-mail.

Transmission Performance of E-mail and FTP

!DX-VS1UE can send e-mail once per five minutes at most in case administrator set DX-VS1UE to send e-mail periodically. If there were no restriction in sending e-mail, DX-VS1UE might cause a serious problem to the recipient’s mail server. However, there is no limit in e-mail transmission triggered by mo- tion detection event or sensor event.

!There is no limit.in the FTP funcion. If you set 0 to the periodic sending menu, DX-VS1UE transmits files at best performance.

!Regarding the FTP function, if the interval between two events is within 2 sec- onds, the second event may be neglected. If the second event occurs within 3 seconds after image transmission, the second image file is not transmitted at times.

!Regarding the e-mail function, if the interval between two events is within 3 sec- onds, the second image file is not transmitted at times.

7)Pan/tilt/zoom Configuration

This page is used to select the serial port for connectiing with a pan/tilt/zoom camera and to set pan/tilt/zoom functions such as ‘Mode’, ‘Preset’, etc.

(1) Select Serial Port

It is to select a serial port among Serial#2, and Serial#3 with which a Pan/tilt/zoom control receiver is connected to DX-VS1UE. Serial#2 are RS232-C interfaces and Serial#3 is RS-422/RS485 inter- face.

(2) Serial Port Base Address

This menu is used to identify the base addresses (camera ID or camera Number) between DX- VS1UE and a Pan/tilt/zoom camera. Administrator can connect pan/tilt/zoom camera through ana- logue pan/tilt/zoom controller.

When RS485 is chosen as an interface and two or more Pan/tilt/zoom cameras are connected, it is necessary to set Camera ID to each camera and to set it to the base address(Camera ID) to which DX-VS1UE corresponds.

22

DX-VS1UE User’s Manual

Page 22 Page 24
Image 23
Page 22 Page 24
Contents DX-VS1 Table of Contents DX-VS1UE User’s Manual Features What is DX-VS1UE?For DX-VS1UE For PC to access DX-VS1UEDescription Amount Remarks Confirmation of the AccessoriesDX-VS1UE View and Description Front View and Description Connector RemarksPTZ/DVR/COM Rear View and Description Connector name RemarksLEDs of Ethernet port Description of DIP SwitchesRight-hand side DIP swith is not available ・Connecting DX-VS1UE with PC Installation SummaryDX-VS1UE User’s Manual DX-VS1UE User’s Manual ・The circuit diagram of a sensor terminal Assigning IP Address and setting Administrator Condition Installing DX-VS1UE Setup ProgramCrossover Cable ・Setting Administrator ConditionsMAC Address Media Access Control Address IP AddressConnecting RS-232C cable Connecting a digital recorder to DX-VS1UEConnecting BNC cable PTZ/DVR/CO Composition of a screen Starting Web browserDVR Check E-Mail Options Mail Event ConfigurationApplication Configuration FTP directory configuration Check Points for E-mail Sending ProblemSelect Serial Port FTP event configurationPan/tilt/zoom Configuration Transmission Performance of E-mail and FTPNew Group New PresetMode Configuration Select Attached Device Serial Port ConfigurationManual Setting Serial Port SelectionPTZ Command for Manual Script Motion Detection Threshold Alarm Parameters for E-mail / FTP ApplicationDevice Type for Input Ports Current State for Input PortsCustomizing Alarm PresetWeb Server TCP Port Video Server TCP PortLogin Page Editing When the changed settings are reflected?Network Detailed Specifications of DX-VS1UEHardware Video and CompressionMisc functions and I/O Serial connection with digital recorder Frequently Asked Questions Installation and operation of DX-VS1UE DX-VS1UE User’s Manual DX-VS1UE User’s Manual DX-VS1UE User’s Manual
Top Page Image Contents