Mitsubishi Electronics DX-VS1 ・Setting Administrator Conditions, IP Address, Crossover Cable

Page 16

To change the IP address, enter the Administrator’s password and press “Change IP Addr.”, enter the new IP address and press “OK.” Button. The “Reboot” button will reboot the DX-VS1UE. This process takes 10-20 seconds.

・Setting Administrator Conditions

To access the Server Configuration Page in DX-VS1UE

from the Setup Menu, enter the admin’s password and press the “Start Con- figuration” button. (For more detailed information, refer to Chapter V “Server Configuration Page”)

* Terminology *

IP Address

IP address is an identification code for computers and devices on a TCP/IP network. Networks using TCP/IP protocol routes based on the IP address of the destination. IP addresses can be assigned at random as long as each one is unique on closed net- work. However, connecting a private network to the Internet requires using regis- tered IP addresses to avoid duplicates. IP address can be acquired from a network administrator or an Internet service provider.

MAC Address (Media Access Control Address)

MAC address is a hardware identification code that uniquely identifies each node of a net- work. The MAC layer directly interfaces with the network media. Consequently, each type of network media requires a unique MAC layer. The MAC address of DX-VS1UE is com- posed of 12-digit numbers. A unique MAC address can be found on the label at the bottom of each DX-VS1UE.

Crossover Cable

The crossover cable (red) provided with the DX-VS1UE is used to connect DX-VS1UE with a PC. A HUB is not necessary for connecting DX-VS1UE to a PC if a crossover cable is used.

Straight Cable

The straight cable (white) is used if a HUB is used as an intermediary between DX-VS1UE and PC.

15

DX-VS1UE User’s Manual

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DX-VS1 Table of Contents DX-VS1UE User’s Manual What is DX-VS1UE? FeaturesFor PC to access DX-VS1UE For DX-VS1UEConfirmation of the Accessories Description Amount RemarksFront View and Description Connector Remarks DX-VS1UE View and DescriptionRear View and Description Connector name Remarks PTZ/DVR/COMDescription of DIP Switches LEDs of Ethernet portRight-hand side DIP swith is not available Installation Summary ・Connecting DX-VS1UE with PCDX-VS1UE User’s Manual DX-VS1UE User’s Manual ・The circuit diagram of a sensor terminal Installing DX-VS1UE Setup Program Assigning IP Address and setting Administrator Condition・Setting Administrator Conditions MAC Address Media Access Control AddressIP Address Crossover CableConnecting BNC cable Connecting a digital recorder to DX-VS1UEConnecting RS-232C cable PTZ/DVR/CO Starting Web browser Composition of a screenDVR Application Configuration Mail Event ConfigurationCheck E-Mail Options Check Points for E-mail Sending Problem FTP directory configurationFTP event configuration Pan/tilt/zoom ConfigurationTransmission Performance of E-mail and FTP Select Serial PortNew Preset New GroupMode Configuration Serial Port Configuration Manual SettingSerial Port Selection Select Attached DevicePTZ Command for Manual Script Alarm Parameters for E-mail / FTP Application Device Type for Input PortsCurrent State for Input Ports Motion Detection ThresholdAlarm Preset Web Server TCP PortVideo Server TCP Port CustomizingWhen the changed settings are reflected? Login Page EditingDetailed Specifications of DX-VS1UE HardwareVideo and Compression NetworkMisc functions and I/O Serial connection with digital recorder Frequently Asked Questions Installation and operation of DX-VS1UE DX-VS1UE User’s Manual DX-VS1UE User’s Manual DX-VS1UE User’s Manual
Top Page Image Contents