Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function:
1. Press TIMER SET UP on the remote control or go to the SYSTEM SETUP: Basic > Presentation Timer menu and press MODE/ENTER to display the Presentation Timer page.
2. Press 
to highlight Timer period and decide the timer period by pressing 
/ 
. The length of time can be set from 1 to 5 minutes in 1- minute increments and 5 to 240 minutes in
If the timer is already on, the timer will restart whenever the Timer period is reset.
3.Press 
to highlight Timer display and choose if you want the timer to show up on the screen by pressing 
/
.
Selection | Description |
Always | Displays the timer on screen throughout the presentation time. |
|
|
1 min/2 min/3 min | Displays the timer on screen in the last 1/2/3 minute(s). |
|
|
Never | Hides the timer throughout the presentation time. |
|
|
4.Press 
to highlight Timer position and set the timer position by pressing
/ 
.
5.Press 
to highlight Timer counting direction and select your desired counting direction by pressing 
/ 
.
5 min | 5 min |
5 min | 5 min |
Selection | Description |
Count Up | Increases from 0 to the preset time. |
|
|
Count Down | Decrease from the preset time to 0. |
|
|
6.Press 
to highlight Sound reminder and decide if you want to activate sound reminder by pressing 
/ 
. If you select On, a double beep sound will be heard at the last 30 seconds of counting down/up, and a triple beep sound will be produced when the timer is up.
7.To activate the presentation timer, press 
and press 
/ 
to select On and press MODE/ENTER.
8.A confirmation message is displayed. Highlight Yes and press MODE/ENTER to confirm. You will see the message “Timer is On” appearing on the screen. The timer starts counting once the timer is turned on.
If you switch input signal or press AUTO when the timer is on, the timer will be stopped.
To cancel the timer, perform the following steps.
1.Go back to the Presentation Timer page.
2.Press 
and press 
/ 
to highlight Off and press MODE/ENTER. A confirmation message is displayed.
3.Highlight Yes and press MODE/ENTER to confirm. You will see the message “Timer is Off” appearing on the screen.
How to use the TIMER On key?
TIMER ON is a
• If the presentation timer is off, pressing this key displays a confirmation message. You can decide whether to activate the timer or not by following the
• If the timer is already on, pressing this key displays a confirmation message. You can decide whether to restart, continue or turn off the timer by following the