•For the specifications of PJLink™, access to the Web site of Japan Business Machine and Information System Industries Association (JBMIA). (http://pjlink.jbmia.or.jp/english)
•This projector is fully compliant to the specifications of JBMIA PJLink™ Class 1. It supports all the commands defined by PJLink™ Class 1, and the compliance has been verified with the PJLink™ standard specifications Version 1.0.
Utilizing the password function
To prevent unauthorized connection to the projector via PJLink™ application, the projector includes an option for setting up password security. To set the password:
1.Open the OSD menu and go to the SYSTEM SETUP: Advanced > LAN Control Settings menu. Press MODE/ENTER. The LAN Control Settings page is displayed.
2.Highlight PJLink Certification and select On by pressing 
/ 
. The default password is "admin".
3.Press 
to highlight Change PJLink Password and press MODE/ENTER.
4.Enter the current password. Press 
, 
to select the digit and press 
, 
to select from
5.Enter the new password and Press MODE/ENTER to confirm.
If you forget the password, please use the password "projectorcontroller".
PJLink™supported commands
The table below shows commands to control the projector using the PJLink™ protocol.
Commend | Description | Remark (Parameter) | ||
|
|
| ||
POWR | Power control | 0 = Standby | ||
1 = Power on | ||||
|
| |||
|
|
| ||
|
| 0 = Standby | ||
POWR? | Inquiry about the power state | 1 = Power on | ||
2 = Cooling down | ||||
|
| |||
|
| 3 = Warming up | ||
|
|
| ||
INPT | Input switching | 11 = COMPUTER1 | ||
|
| 12 | = COMPUTER2 | |
|
| |||
INPT? | Inquiry about input switching | 21 | = VIDEO | |
22 | = | |||
|
| |||
|
| 31 | = HDMI | |
|
|
|
| |
AVMT | Mute control | 10 | = BLANK disable | |
|
| 11 = BLANK enable | ||
|
| |||
|
| 20 | = Audio mute disable | |
AVMT? | Inquiry about the mute state | 21 | = Audio mute enable | |
|
| 30 | = BLANK and audio mute disable | |
|
| 31 | = BLANK and audio mute enable | |
|
|
| ||
|
| 1st byte: Fan error, 0 or 2 | ||
|
| 2nd byte: Lamp error, 0 or 2 | ||
|
| 3rd byte: Temperature error, 0 or 2 | ||
ERST? | Inquiry about the error state | 4th byte: Always 0 | ||
5th byte: Always 0 | ||||
|
| |||
|
| 6th byte: Always 0 | ||
|
| * 0 or 2 mean as follows: | ||
|
| 0 = No error detected, 2 = Error | ||
|
|
| ||
|
| 1st value (1 to 4 digits): Cumulative lamp operating time | ||
LAMP? | Inquiry about the lamp state | (This item shows a lamp operating time (hour) calculated | ||
based on that Lamp Mode is Low.) | ||||
|
| |||
|
| 2nd value: 0 = Lamp off, 1 = Lamp on | ||
|
|
| ||
INST? | Inquiry about the available inputs | The following value is returned. | ||
"11 12 21 22 31" | ||||
|
| |||
|
|
| ||
NAME? | Inquiry about the projector name | The command responds with the projector name specified in | ||
the Tools page. | ||||
|
| |||
|
|
|
| |
INF1? | Inquiry about the manufacturer | "MITSUBISHI" is returned. | ||
name | ||||
|
|
| ||
|
|
|
| |