Onkyo HT-R410 Connections for remote control z, Power on/ready function, Direct change function

Page 16

Connections for remote control (z)

The z terminal on the HT-R410 is for connecting other Onkyo components equipped with the same z terminal. When a component is z-connected, you can point the remote controller supplied with the HT-R410 at the sensor on the HT-R410 and operate that component without having to switch remote controllers. In addition, by connecting components to the z terminal, you can also perform the system operation given below.

To connect components using the z terminal, simply connect a

zcable from this z terminal to the z terminal of the other component. An z cable comes with every cassette tape deck, CD player, and DVD player that has an z terminal.

Power on/ready function

When the HT-R410 is in the standby state, if an z-connected component is turned on, then the HT-R410 also turns on and the input source selected at the HT-R410 automatically switches to that component.

If the power cord for an z-connected component is connected to the AC OUTLET on the HT-R410, or if the HT-R410 is turned on, this function will not work.

Direct change function

When the play button is pressed at an z-connected component, the input source selected at the HT-R410 automatically changes to that component.

Example: Onkyo DVD Player

REMOTE

COAXIAL

CONTROL

 

L

R

DIGITAL

ANALOG

OUTPUT

OUTPUT

Power off function

When the HT-R410 is placed in the standby state, all z-connected components are also automatically put in the standby state.

zcable

AM

Be sure to connect using the audio connection

cable.

FM

75 ANTENNA

 

 

 

 

 

 

 

FRONT

 

FRONT

 

CENTER

SURROUND

 

 

VIDEO 3 VIDEO 2

VIDEO 1

DVD

MONITOR

SPEAKERS B

SPEAKERS A

SPEAKER

SPEAKERS

AC OUTLET

 

R

L

R

L

 

R

L

 

 

 

IN

OUT

IN

IN

OUT

 

 

 

 

 

 

 

 

DIGITAL INPUT

 

 

 

 

 

 

S VIDEO

 

 

 

 

DO NOT connect the

OPTICAL COAXIAL

REMOTE

 

 

 

 

 

 

 

 

 

 

power cord at this

 

CONTROL

 

 

 

 

 

 

 

 

 

 

 

IN

IN

OUT

IN

IN

 

 

 

 

 

 

time.

 

 

 

 

 

 

 

 

VIDEO

 

 

 

 

 

 

 

IN

OUT

IN

IN

IN

OUT

IN

FRONT

 

SURR

L

L

SUBWOOFER

 

PRE OUT

 

R R

CD

 

TAPE

VIDEO 3 VIDEO 2

VIDEO 1

DVD

CENTER

SUB WOOFER

HT-R410

REMOTE

CONTROL

zconnector

Ex: Onkyo CD player

zconnector

Ex: Onkyo cassette tape deck

Connection example when there is more than one Onkyo components equipped with

zterminals

Notes

•Connect the plugs securely.

•Be sure to connect to the z connectors using the z cable.

•For proper operation the audio connection cables must be connected. This applies to both remote and standard operation.

•If a component has two z terminals, you can use either one to connect to the HT-R410. The other one can be used to daisy chain with another component.

•With Onkyo DVD players, you can enter the manufacturer code so that you can operate the DVD player directly with the remote controller without connecting the z terminals (see page 33).

•Do not connect the AV Receiver’s z connector to any component other than an Onkyo product. It may cause malfunction.

•Certain component models may not be able to control the HT-R410.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents HT-R410 Important safeguards Precautions For U.S. modelsFor Canadian models Modèle pour les CanadienFeatures Supplied accessoriesPrecautions Amplifier FeaturesBefore using the unit Attach the battery coverUsing the remote controller Remote control sensor Receiver Standby indicator 30˚Index to parts and controls Index to parts and controls Remote Control Rear panelTape IN/OUT Antenna 14Remote controller Preset 2/3 button= Mode buttons @ Adjust 2/3 buttonConnecting to audio/video equipment Connecting to audio/video equipment Do not connect the power cord at this timeCoaxial plug Coaxial cable Digital signal Signal flow Video Camera, Game Device, etc. VideoStandard speaker placement of the speaker system a Positioning speakers/Connecting speakersUsing the provided speaker labels Positioning speakers/Connecting speakers How to connect to the speaker terminalsConnecting to the speaker system a Connecting to the speaker system BConnecting antennas Connecting the supplied FM and AM indoor antennasAdjusting the position of the FM indoor antenna Adjusting the position of the AM indoor antennaConnecting antennas Connecting an FM outdoor antennaConnecting an AM outdoor antenna Directional IinkageConnections for remote control z Power on/ready functionPower off function Direct change functionBefore operating the remote controller Enjoying music or videos with the HT-R410Press STANDBY/ON Selecting a sourceSetting the crossover frequency Speaker setupPress Speaker Adjust twice Speaker setup Setting the subwoofer mode Press Subwoofer Mode on the unit → Subwoofer Mode 1 DefaultSubwoofer Mode Adjusting each speaker’s relative volume balance Test toneChanging the default settings according to your connections Tuning into a radio station Press Tuner Tuning in a weak frequency only for FM stationsListening to the radio There are two ways to select radio stationsPresetting radio stations Selecting preset stationsPress Tuner to switch the input source to the tuner Listening to the radioMuting the sound remote controller only Press Muting Listening through headphonesVarious functions common to all the sources Before operating the SP A/SP BVarious functions common to all the sources Using the sleep timer remote controller only Press SleepChanging the display Press Display To fix the Auto to DTS or PCM Setting the input signal formatLevel 5/∞ Using analog multi channel input Enjoying multi channel sourcesBefore operating Direct orEnjoying the listening modes Selecting the listening mode Press one of the listening mode buttonsInput source and available listening mode Enjoying the listening modesBefore operating the remote control Audio adjust functionUsing the audio adjust functions Audio adjust function Late Night Dolby DigitalInput selector buttons Recording a sourceCamera Entering the manufacturer’s code Using the remote controller with your other AV componentsNumeric Using the remote controller with your other AV components Using the RC-518M Use the buttons as explained belowVCR TapeTV mode TV Troubleshooting Amplifier Remote controller Symptoms Causes Remedies PagesTroubleshooting When incorrect operation is observedSymptoms Causes Remedies OtherSpecifications Onkyo Europe Electronics GmbH
Related manuals
Manual 4 pages 57.53 Kb

HT-R410 specifications

The Onkyo HT-R410 is a versatile and robust home theater receiver designed to enhance your audio-visual experience. Launched with features catered to both casual listeners and audiophiles alike, this receiver demonstrates why Onkyo has long been recognized for its commitment to quality and innovation.

At the heart of the HT-R410 is its 5.1 channel design, delivering an impressive total output power of 100 watts per channel. This allows users to fully immerse themselves in their favorite movies, music, and games with surrounding sound that matches the scale of the visuals. The receiver’s built-in Dolby Digital and DTS decoding ensures that audio tracks are reproduced with clarity and dynamism, bringing cinematic experiences to life within your living room.

One of the standout features of the Onkyo HT-R410 is its simple yet effective connectivity options. It includes multiple HDMI inputs, allowing users to hook up multiple devices such as game consoles, Blu-ray players, and streaming devices. The HDMI output supports both video and audio transmission, simplifying the setup and reducing cable clutter. Additionally, the receiver is equipped with legacy inputs, including composite and optical audio inputs, ensuring compatibility with various devices.

The HT-R410 adopts Onkyo’s renowned Dynamic Audio Amplification technology, which optimizes audio quality while minimizing distortion. This not only enhances listening experiences across all genres of music but also ensures a rich, accurate soundstage for films. The receiver's user-friendly interface, along with an easy-to-navigate remote control, allows users to switch between different audio settings and input sources seamlessly.

Furthermore, the Onkyo HT-R410 is designed with energy efficiency in mind, featuring a low standby power consumption rate, which is ideal for eco-conscious consumers. The device is also equipped with an intuitive graphic equalizer, enabling users to tailor sound profiles to suit their preferences or the specific acoustics of their viewing space.

In summary, the Onkyo HT-R410 is a feature-rich home theater receiver that combines quality sound with flexible connectivity. Its capabilities make it a perfect choice for anyone looking to create a cinematic experience at home without compromising on audio fidelity. Whether for action-packed films or serene musical compositions, the HT-R410 stands out for its performance and reliability.
Top Page Image Contents