Onkyo HT-R410 appendix Using the RC-518M, Use the buttons as explained below

Page 35

Using the remote controller with your other AV components

Using the RC-518M

If you need to enter the manufacturer’s code for your AV component into the remote controller, see page 33.

1.Point the remote controller at the HT-R410 and use the input selector buttons to select an input source for the HT-R410.

2.Use the remote controller’s mode buttons (i.e., VCR, TV, CABLE/SAT, CD/DVD, or RCVR/TAPE) to select a remote controller mode.

(You don’t have to point the remote controller at anything for this step.)

3.Use the remote controller’s Power button to turn on the AV component.

Remember, if your AV component is connected to the HT- R410 via z, point the remote controller at the

HT-R410. If not, point the remote controller at the AV component.

(A cassette recorder can’t be turned on or off from the remote controller. You must use its POWER switch.)

4.Use the buttons as explained below.

In the following illustrations, buttons that control the HT-R410 regardless of which mode is selected are shaded. When you want to control the HT-R410 fully, press the RCVR/TAPE button, then you can use all the buttons that apply to the HT- R410.

DVD mode (CD/DVD)

3.

 

2.

CD/DVD

4. DVD

 

operation

 

buttons

 

1.

DVD input

 

selector

You must enter the appropriate manufacturer’s code for your DVD player (see page 33).

: Power On/Off.

£ :Starts playback of DVD.

7 :Stops playback.

¡: Searches the disc in the forward direction.

1: Searches the disc in the reverse direction.

8:Lets playback pause temporarily or advances the disc frame by frame.

¢: Starts playback from the beginning of the next chapter/track.

4: Starts playback from the beginning of the current chapter/track.

DISC : This button is valid when the DVD changer is used and selects the disc to be played.

1–9, +10, 0 : Use to enter numeric values.

TOP MENU : Displays the top menu of each DVD disc.

MENU : Displays a menu recorded in the DVD disc.

RETURN : Returns to the previous menu.

SETUP : Displays the setup menu.

5/∞/2/3 : Selects an item in a menu.

ENT : Enters the selection in memory.

Note

Since you can only enter a CD code or DVD code for the CD/DVD button, you can use CD mode or DVD mode, but not both.

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents HT-R410 Important safeguards Modèle pour les Canadien PrecautionsFor U.S. models For Canadian modelsAmplifier Features FeaturesSupplied accessories PrecautionsRemote control sensor Receiver Standby indicator 30˚ Before using the unitAttach the battery cover Using the remote controllerIndex to parts and controls Index to parts and controls Antenna 14 Remote ControlRear panel Tape IN/OUT@ Adjust 2/3 button Remote controllerPreset 2/3 button = Mode buttonsConnecting to audio/video equipment Video Camera, Game Device, etc. Video Connecting to audio/video equipmentDo not connect the power cord at this time Coaxial plug Coaxial cable Digital signal Signal flowUsing the provided speaker labels Positioning speakers/Connecting speakersStandard speaker placement of the speaker system a Connecting to the speaker system B Positioning speakers/Connecting speakersHow to connect to the speaker terminals Connecting to the speaker system aAdjusting the position of the AM indoor antenna Connecting antennasConnecting the supplied FM and AM indoor antennas Adjusting the position of the FM indoor antennaDirectional Iinkage Connecting antennasConnecting an FM outdoor antenna Connecting an AM outdoor antennaDirect change function Connections for remote control zPower on/ready function Power off functionSelecting a source Before operating the remote controllerEnjoying music or videos with the HT-R410 Press STANDBY/ONPress Speaker Adjust twice Speaker setupSetting the crossover frequency Speaker setup Adjusting each speaker’s relative volume balance Test tone Setting the subwoofer mode Press Subwoofer Mode on the unit→ Subwoofer Mode 1 Default Subwoofer ModeChanging the default settings according to your connections There are two ways to select radio stations Tuning into a radio station Press TunerTuning in a weak frequency only for FM stations Listening to the radioListening to the radio Presetting radio stationsSelecting preset stations Press Tuner to switch the input source to the tunerBefore operating the SP A/SP B Muting the sound remote controller only Press MutingListening through headphones Various functions common to all the sourcesChanging the display Press Display Using the sleep timer remote controller only Press SleepVarious functions common to all the sources Level 5/∞ Setting the input signal formatTo fix the Auto to DTS or PCM Direct or Using analog multi channel inputEnjoying multi channel sources Before operatingEnjoying the listening modes Enjoying the listening modes Selecting the listening modePress one of the listening mode buttons Input source and available listening modeUsing the audio adjust functions Audio adjust functionBefore operating the remote control Late Night Dolby Digital Audio adjust functionCamera Recording a sourceInput selector buttons Numeric Using the remote controller with your other AV componentsEntering the manufacturer’s code Using the remote controller with your other AV components Use the buttons as explained below Using the RC-518MTape VCRTV mode TV Amplifier Remote controller Symptoms Causes Remedies Pages TroubleshootingOther TroubleshootingWhen incorrect operation is observed Symptoms Causes RemediesOnkyo Europe Electronics GmbH Specifications
Related manuals
Manual 4 pages 57.53 Kb

HT-R410 specifications

The Onkyo HT-R410 is a versatile and robust home theater receiver designed to enhance your audio-visual experience. Launched with features catered to both casual listeners and audiophiles alike, this receiver demonstrates why Onkyo has long been recognized for its commitment to quality and innovation.

At the heart of the HT-R410 is its 5.1 channel design, delivering an impressive total output power of 100 watts per channel. This allows users to fully immerse themselves in their favorite movies, music, and games with surrounding sound that matches the scale of the visuals. The receiver’s built-in Dolby Digital and DTS decoding ensures that audio tracks are reproduced with clarity and dynamism, bringing cinematic experiences to life within your living room.

One of the standout features of the Onkyo HT-R410 is its simple yet effective connectivity options. It includes multiple HDMI inputs, allowing users to hook up multiple devices such as game consoles, Blu-ray players, and streaming devices. The HDMI output supports both video and audio transmission, simplifying the setup and reducing cable clutter. Additionally, the receiver is equipped with legacy inputs, including composite and optical audio inputs, ensuring compatibility with various devices.

The HT-R410 adopts Onkyo’s renowned Dynamic Audio Amplification technology, which optimizes audio quality while minimizing distortion. This not only enhances listening experiences across all genres of music but also ensures a rich, accurate soundstage for films. The receiver's user-friendly interface, along with an easy-to-navigate remote control, allows users to switch between different audio settings and input sources seamlessly.

Furthermore, the Onkyo HT-R410 is designed with energy efficiency in mind, featuring a low standby power consumption rate, which is ideal for eco-conscious consumers. The device is also equipped with an intuitive graphic equalizer, enabling users to tailor sound profiles to suit their preferences or the specific acoustics of their viewing space.

In summary, the Onkyo HT-R410 is a feature-rich home theater receiver that combines quality sound with flexible connectivity. Its capabilities make it a perfect choice for anyone looking to create a cinematic experience at home without compromising on audio fidelity. Whether for action-packed films or serene musical compositions, the HT-R410 stands out for its performance and reliability.
Top Page Image Contents