Onkyo HT-R410 Various functions common to all the sources, Changing the display Press Display

Page 25

Various functions common to all the sources

SLEEP DIMMER

DISPLAY DIMMER

Changing the display

Press DISPLAY.

Each time you press DISPLAY, the screen changes as follows:

When an input source other than FM or AM is selected

Input source + volume

Program format*

Input source + Listening mode (or Multich)

Press DISPLAY once to initiate the program format display. Pressing the button again switches the display to the other display.

*When the input signal is digital audio

The program format is displayed. For example, the display “Dolby D: 3/2.1” shows that the format is Dolby Digital with 5.1 discrete channels consisting of three front channels (front left, front right, and center), two surround channels (surround left and surround right), and the low frequency effect (LFE) channel.

When the front channel number is 2, they are the front left and front right; when it is 1, it is monaural. When the surround channel number is 1, it is monaural; when it is 0, there is no surround channel. When no LFE number is given there is no LFE channel. Also, if there is no program format for the input signal, nothing will be displayed.

When the input signal is linear PCM

The sampling frequency is displayed. For example, the display “PCM fs: 44.1kHz” shows that the signal is PCM and that the sampling frequency is 44.1 kHz.

When FM or AM is selected as the input source

FM/AM frequency +

Preset no.

FM/AM +

Listening mode

Controlling the brightness of the display on the AV Receiver

Press DIMMER.

Each press of the button changes the brightness as follows:

The display becomes less bright.

The display is dimmed.

The display becomes bright.

Using the sleep timer (remote controller only)

Press SLEEP.

“Sleep 90 min” appears in the multipurpose display for about 5 seconds, which means the AV Receiver will turn off and enter standby mode in 90 minutes. Also the SLEEP indicator is lit in the display while the sleep timer is on.

SLEEP indicator

Each press of the button makes the remaining time shorter by 10 minutes.

Checking the remaining time

Press SLEEP while the sleep timer is On.

The remaining time is displayed.

If you press SLEEP while the remaining time is displayed, the remaining time is reduced by 10 minutes.

Canceling the sleep timer

Press SLEEP repeatedly until the SLEEP indicator goes off.

25

Image 25
Contents HT-R410 Important safeguards For U.S. models PrecautionsFor Canadian models Modèle pour les CanadienSupplied accessories FeaturesPrecautions Amplifier FeaturesAttach the battery cover Before using the unitUsing the remote controller Remote control sensor Receiver Standby indicator 30˚Index to parts and controls Index to parts and controls Rear panel Remote ControlTape IN/OUT Antenna 14Preset 2/3 button Remote controller= Mode buttons @ Adjust 2/3 buttonConnecting to audio/video equipment Do not connect the power cord at this time Connecting to audio/video equipmentCoaxial plug Coaxial cable Digital signal Signal flow Video Camera, Game Device, etc. VideoStandard speaker placement of the speaker system a Positioning speakers/Connecting speakersUsing the provided speaker labels How to connect to the speaker terminals Positioning speakers/Connecting speakersConnecting to the speaker system a Connecting to the speaker system BConnecting the supplied FM and AM indoor antennas Connecting antennasAdjusting the position of the FM indoor antenna Adjusting the position of the AM indoor antennaConnecting an FM outdoor antenna Connecting antennasConnecting an AM outdoor antenna Directional IinkagePower on/ready function Connections for remote control zPower off function Direct change functionEnjoying music or videos with the HT-R410 Before operating the remote controllerPress STANDBY/ON Selecting a sourceSetting the crossover frequency Speaker setupPress Speaker Adjust twice Speaker setup → Subwoofer Mode 1 Default Setting the subwoofer mode Press Subwoofer Mode on the unitSubwoofer Mode Adjusting each speaker’s relative volume balance Test toneChanging the default settings according to your connections Tuning in a weak frequency only for FM stations Tuning into a radio station Press TunerListening to the radio There are two ways to select radio stationsSelecting preset stations Presetting radio stationsPress Tuner to switch the input source to the tuner Listening to the radioListening through headphones Muting the sound remote controller only Press MutingVarious functions common to all the sources Before operating the SP A/SP BVarious functions common to all the sources Using the sleep timer remote controller only Press SleepChanging the display Press Display To fix the Auto to DTS or PCM Setting the input signal formatLevel 5/∞ Enjoying multi channel sources Using analog multi channel inputBefore operating Direct orEnjoying the listening modes Press one of the listening mode buttons Selecting the listening modeInput source and available listening mode Enjoying the listening modesBefore operating the remote control Audio adjust functionUsing the audio adjust functions Late Night Dolby Digital Audio adjust functionInput selector buttons Recording a sourceCamera Entering the manufacturer’s code Using the remote controller with your other AV componentsNumeric Using the remote controller with your other AV components Use the buttons as explained below Using the RC-518MTape VCRTV mode TV Amplifier Remote controller Symptoms Causes Remedies Pages TroubleshootingWhen incorrect operation is observed TroubleshootingSymptoms Causes Remedies OtherOnkyo Europe Electronics GmbH Specifications
Related manuals
Manual 4 pages 57.53 Kb

HT-R410 specifications

The Onkyo HT-R410 is a versatile and robust home theater receiver designed to enhance your audio-visual experience. Launched with features catered to both casual listeners and audiophiles alike, this receiver demonstrates why Onkyo has long been recognized for its commitment to quality and innovation.

At the heart of the HT-R410 is its 5.1 channel design, delivering an impressive total output power of 100 watts per channel. This allows users to fully immerse themselves in their favorite movies, music, and games with surrounding sound that matches the scale of the visuals. The receiver’s built-in Dolby Digital and DTS decoding ensures that audio tracks are reproduced with clarity and dynamism, bringing cinematic experiences to life within your living room.

One of the standout features of the Onkyo HT-R410 is its simple yet effective connectivity options. It includes multiple HDMI inputs, allowing users to hook up multiple devices such as game consoles, Blu-ray players, and streaming devices. The HDMI output supports both video and audio transmission, simplifying the setup and reducing cable clutter. Additionally, the receiver is equipped with legacy inputs, including composite and optical audio inputs, ensuring compatibility with various devices.

The HT-R410 adopts Onkyo’s renowned Dynamic Audio Amplification technology, which optimizes audio quality while minimizing distortion. This not only enhances listening experiences across all genres of music but also ensures a rich, accurate soundstage for films. The receiver's user-friendly interface, along with an easy-to-navigate remote control, allows users to switch between different audio settings and input sources seamlessly.

Furthermore, the Onkyo HT-R410 is designed with energy efficiency in mind, featuring a low standby power consumption rate, which is ideal for eco-conscious consumers. The device is also equipped with an intuitive graphic equalizer, enabling users to tailor sound profiles to suit their preferences or the specific acoustics of their viewing space.

In summary, the Onkyo HT-R410 is a feature-rich home theater receiver that combines quality sound with flexible connectivity. Its capabilities make it a perfect choice for anyone looking to create a cinematic experience at home without compromising on audio fidelity. Whether for action-packed films or serene musical compositions, the HT-R410 stands out for its performance and reliability.