Onkyo HT-R410 appendix Recording a source, Input selector buttons, Camera

Page 32

Recording a source

To record the input source signal you are currently watching or listening to

Recording of video and/or audio signals can be performed on the components connected to the VIDEO 1 OUT and TAPE OUT (audio only) jacks.

Input selector buttons

1.Press an input selector button to select the input source to record.

The input source is now selected and you may watch or listen to it as desired. The currently selected input source signal to the VIDEO 1 OUT and TAPE OUT outputs for recording.

2.Start recording at the recording component as desired.

Recording the video from one source and the audio from another

You can add the sound from one source to the video of another source to make your own video recordings.

Below is an example of recording the sound from a CD player connected to CD L/R jacks and the video from a video camera connected to VIDEO 3 INPUT VIDEO jack to video cassette tape in a video cassette recorder connected to the VIDEO 1 OUT L/R and VIDEO jacks.

 

 

 

 

Video

 

 

 

 

 

 

 

camera

 

 

 

 

 

VIDEO 3 VIDEO 2

VIDEO 1

DVD

MONITOR

 

 

 

 

IN

OUT

IN

IN

OUT

DIGITAL INPUT

 

 

 

 

 

 

S VIDEO

OPTICAL

COAXIAL

REMOTE

 

 

 

 

 

 

 

 

CONTROL

 

 

 

 

 

 

 

 

 

IN

IN

OUT

IN

IN

 

 

 

 

 

 

 

 

 

VIDEO

IN

OUT

IN

IN

IN

OUT

IN

FRONT

SURR CENTER

L

 

 

 

 

 

 

 

L

SUBWOOFER

 

 

 

 

 

 

 

 

PRE OUT

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

R

CD

TAPE

VIDEO 3 VIDEO 2

VIDEO 1

 

SUB

 

WOOFER

Notes

You can record analog audio, but not digital audio. Make sure that you have made a correct analog connection.

If you change the input source during recording, you will record the signals from the newly selected input source.

You cannot record the surround effects.

Only the FRONT L/R audio can be recorded when inputting multi channel signals to the DVD jack.

CD player

DVD

Video cassette

recorder

1.Insert a CD in the CD player and insert a tape in the video camera connected to the VIDEO 3 INPUT.

2.Insert a video tape for recording in the video cassette recorder connected to VIDEO 1 OUT.

3.Press VIDEO 3.

4.Press CD.

This switches the audio output to CD, but the video output remains VIDEO 3 that has been selected in step 3.

5.Start recording on the video cassette recorder and start playing at the CD player and video camera as desired.

The recorded video signal becomes the output from the video camera and recorded audio signal becomes that from the CD player.

Notes

You can record analog audio, but not digital audio. Make sure that you have made a correct analog connection.

If you change the input source during recording, you will record the audio signals from the newly selected input source and the video signals assigned to that input source.

You cannot record the surround effects.

32

Image 32
Contents HT-R410 Important safeguards Precautions For U.S. modelsFor Canadian models Modèle pour les CanadienFeatures Supplied accessoriesPrecautions Amplifier FeaturesBefore using the unit Attach the battery coverUsing the remote controller Remote control sensor Receiver Standby indicator 30˚Index to parts and controls Index to parts and controls Remote Control Rear panelTape IN/OUT Antenna 14Remote controller Preset 2/3 button= Mode buttons @ Adjust 2/3 buttonConnecting to audio/video equipment Connecting to audio/video equipment Do not connect the power cord at this timeCoaxial plug Coaxial cable Digital signal Signal flow Video Camera, Game Device, etc. VideoUsing the provided speaker labels Positioning speakers/Connecting speakersStandard speaker placement of the speaker system a Positioning speakers/Connecting speakers How to connect to the speaker terminalsConnecting to the speaker system a Connecting to the speaker system BConnecting antennas Connecting the supplied FM and AM indoor antennasAdjusting the position of the FM indoor antenna Adjusting the position of the AM indoor antennaConnecting antennas Connecting an FM outdoor antennaConnecting an AM outdoor antenna Directional IinkageConnections for remote control z Power on/ready functionPower off function Direct change functionBefore operating the remote controller Enjoying music or videos with the HT-R410Press STANDBY/ON Selecting a sourcePress Speaker Adjust twice Speaker setupSetting the crossover frequency Speaker setup Setting the subwoofer mode Press Subwoofer Mode on the unit → Subwoofer Mode 1 DefaultSubwoofer Mode Adjusting each speaker’s relative volume balance Test toneChanging the default settings according to your connections Tuning into a radio station Press Tuner Tuning in a weak frequency only for FM stationsListening to the radio There are two ways to select radio stationsPresetting radio stations Selecting preset stationsPress Tuner to switch the input source to the tuner Listening to the radioMuting the sound remote controller only Press Muting Listening through headphonesVarious functions common to all the sources Before operating the SP A/SP BChanging the display Press Display Using the sleep timer remote controller only Press SleepVarious functions common to all the sources Level 5/∞ Setting the input signal formatTo fix the Auto to DTS or PCM Using analog multi channel input Enjoying multi channel sourcesBefore operating Direct orEnjoying the listening modes Selecting the listening mode Press one of the listening mode buttonsInput source and available listening mode Enjoying the listening modesUsing the audio adjust functions Audio adjust functionBefore operating the remote control Audio adjust function Late Night Dolby DigitalCamera Recording a sourceInput selector buttons Numeric Using the remote controller with your other AV componentsEntering the manufacturer’s code Using the remote controller with your other AV components Using the RC-518M Use the buttons as explained belowVCR TapeTV mode TV Troubleshooting Amplifier Remote controller Symptoms Causes Remedies PagesTroubleshooting When incorrect operation is observedSymptoms Causes Remedies OtherSpecifications Onkyo Europe Electronics GmbH
Related manuals
Manual 4 pages 57.53 Kb

HT-R410 specifications

The Onkyo HT-R410 is a versatile and robust home theater receiver designed to enhance your audio-visual experience. Launched with features catered to both casual listeners and audiophiles alike, this receiver demonstrates why Onkyo has long been recognized for its commitment to quality and innovation.

At the heart of the HT-R410 is its 5.1 channel design, delivering an impressive total output power of 100 watts per channel. This allows users to fully immerse themselves in their favorite movies, music, and games with surrounding sound that matches the scale of the visuals. The receiver’s built-in Dolby Digital and DTS decoding ensures that audio tracks are reproduced with clarity and dynamism, bringing cinematic experiences to life within your living room.

One of the standout features of the Onkyo HT-R410 is its simple yet effective connectivity options. It includes multiple HDMI inputs, allowing users to hook up multiple devices such as game consoles, Blu-ray players, and streaming devices. The HDMI output supports both video and audio transmission, simplifying the setup and reducing cable clutter. Additionally, the receiver is equipped with legacy inputs, including composite and optical audio inputs, ensuring compatibility with various devices.

The HT-R410 adopts Onkyo’s renowned Dynamic Audio Amplification technology, which optimizes audio quality while minimizing distortion. This not only enhances listening experiences across all genres of music but also ensures a rich, accurate soundstage for films. The receiver's user-friendly interface, along with an easy-to-navigate remote control, allows users to switch between different audio settings and input sources seamlessly.

Furthermore, the Onkyo HT-R410 is designed with energy efficiency in mind, featuring a low standby power consumption rate, which is ideal for eco-conscious consumers. The device is also equipped with an intuitive graphic equalizer, enabling users to tailor sound profiles to suit their preferences or the specific acoustics of their viewing space.

In summary, the Onkyo HT-R410 is a feature-rich home theater receiver that combines quality sound with flexible connectivity. Its capabilities make it a perfect choice for anyone looking to create a cinematic experience at home without compromising on audio fidelity. Whether for action-packed films or serene musical compositions, the HT-R410 stands out for its performance and reliability.