Onkyo HT-R410 appendix Specifications, Onkyo Europe Electronics GmbH

Page 40

Specifications

AMPLIFIER SECTION

Power Output (FTC Power, Rated Power)

Front L/R Speakers:

100 Watts per channel min. RMS. Into

 

8 ohms 2 channel driven, from 20 to

 

20,000 Hz with no more than 0.08%

 

total harmonic distortion.

Center Speaker:

100 Watts min. RMS. Into 8 ohms ,

 

from 20 to 20,000 Hz with no more

 

than 0.08% total harmonic distortion.

Surround L/R Speakers:

100 Watts per channel min. RMS. Into

 

8 ohms 2 channel driven, from 20 to

 

20,000 Hz with no more than 0.08%

 

total harmonic distortion.

Dynamic power output (DIRECT): 230 watts 2 at 3 ohms

 

170 watts 2 at 4 ohms

 

115 watts 2 at 8 ohms

Total Harmonic Distortion:

0.08% at rated power

 

0.08% at 1 watt output

IM Distortion:

0.08% at rated power

 

0.08% at 1 watt output

Damping Factor:

60 at 8 ohms

Input Sensitivity and Impedance

 

DIGITAL INPUT (OPTICAL):

0.5 Vp-p, 75 ohms

DIGITAL INPUT (COAXIAL): 0.5 Vp-p, 75 ohms

LINE (CD, VIDEO 1, 2, 3, TAPE):

200 mV, 47 kohms

Multichannel Input

 

(DVD FRONT L/C/R, SURR L/R): 200 mV, 47 kohms

(SUBWOOFER):

36 mV, 47 kohms

Output Level and Impedance

 

Rec out (TAPE, VIDEO 1):

200 mV, 470 ohms

Pre out (SUBWOOFER):

1 V, 470 ohms

Frequency Response:

10 Hz to 100 kHz, +1/–3 dB (Direct mode)

Tone Control

 

Bass:

±12 dB at 50 Hz

Treble:

±12 dB at 20 kHz

Signal-to-Noise Ratio:

CD/TAPE: 100 dB (IHF-A, Direct mode)

Muting:

–50 dB

VIDEO SECTION

Input Sensitivity and Impedance

VIDEO (DVD, VIDEO 1, 2, 3): 1 Vp-p, 75 ohms

SVIDEO (DVD, VIDEO 1, 2): 1 Vp-p, 75 ohms (Y)

0.28Vp-p, 75 ohms (C)

Output Level and Impedance

VIDEO (VIDEO 1, 2, MONITOR): 1 Vp-p, 75 ohms

S VIDEO (VIDEO 1, 2, MONITOR): 1 Vp-p, 75 ohms (Y)

0.28 Vp-p, 75 ohms (C)

TUNER SECTION

FM

 

Tuning Range:

87.5-108.0 MHz (100 kHz steps)

Usable Sensitivity

 

Mono:

11.2 dBf, 1.0 µV (75 ohms, IHF)

 

11.2 dBf, 0.9 µV (75 ohms, DIN)

Stereo:

17.2 dBf, 2.0 µV (75 ohms, IHF)

 

17.2 dBf, 23 µV (75 ohms DIN)

50 dB Quieting Sensitivity

 

Mono:

17.2 dBf, 2.0 µV (75 ohms)

Stereo:

37.2 dBf, 20.0 µV (75 ohms)

Capture Ratio:

2.0 dB

Image Rejection Ratio:

40 dB

IF Rejection Ratio:

90 dB

Signal-to-Noise Ratio

 

Mono:

76 dB, IHF

Stereo:

70 dB, IHF

Alternate Channel Attenuation:

55 dB, IHF, ±400 kHz

Selectivity:

50 dB (DIN)

AM Suppression Ratio:

50 dB

Total Harmonic Distortion

 

Mono:

0.2%

Stereo:

0.3%

Frequency Response:

30 Hz-15 kHz, ±1.0 dB

Stereo Separation:

45 dB at 1 kHz

 

30 dB at 100 Hz-10 kHz

AM

 

Tuning Range:

530-1,710 kHz (10 kHz steps)

Usable Sensitivity:

30 µV

Image Rejection Ratio:

40 dB

IF Rejection Ratio:

40 dB

Signal-to-Noise Ratio:

40 dB

Total Harmonic Distortion:

0.7%

GENERAL

Power Supply and Power Consumption: AC 120 V, 60 Hz

4.7 A

Dimensions (W H D):

17-1/8” 5-7/8” 14-3/8”

 

435 150 365 mm

 

Weight:

19.0 lbs., 8.6 kg

 

REMOTE CONTROL

Transmitter:

Infrared

Signal range:

Approx. 16 ft., 5 meters

Power supply:

Two “AA” batteries (1.5 V 2)

Specifications and features are subject to change without notice.

Power supply and voltage vary depending on the area in which the unit is purchased.

Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN

Tel: 072-831-8111 Fax: 072-831-8124

ONKYO U.S.A. CORPORATION

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.

Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com

ONKYO EUROPE ELECTRONICS GmbH

Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY

Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.onkyo.net

ONKYO CHINA LIMITED

 

Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,

HOMEPAGE

N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039

http://www.onkyo.co.jp/

SN 29343469

W0301-1

Image 40
Contents HT-R410 Important safeguards Precautions For U.S. modelsFor Canadian models Modèle pour les CanadienFeatures Supplied accessoriesPrecautions Amplifier FeaturesBefore using the unit Attach the battery coverUsing the remote controller Remote control sensor Receiver Standby indicator 30˚Index to parts and controls Index to parts and controls Remote Control Rear panelTape IN/OUT Antenna 14Remote controller Preset 2/3 button= Mode buttons @ Adjust 2/3 buttonConnecting to audio/video equipment Connecting to audio/video equipment Do not connect the power cord at this timeCoaxial plug Coaxial cable Digital signal Signal flow Video Camera, Game Device, etc. VideoStandard speaker placement of the speaker system a Positioning speakers/Connecting speakersUsing the provided speaker labels Positioning speakers/Connecting speakers How to connect to the speaker terminalsConnecting to the speaker system a Connecting to the speaker system BConnecting antennas Connecting the supplied FM and AM indoor antennasAdjusting the position of the FM indoor antenna Adjusting the position of the AM indoor antennaConnecting antennas Connecting an FM outdoor antennaConnecting an AM outdoor antenna Directional IinkageConnections for remote control z Power on/ready functionPower off function Direct change functionBefore operating the remote controller Enjoying music or videos with the HT-R410Press STANDBY/ON Selecting a sourceSetting the crossover frequency Speaker setupPress Speaker Adjust twice Speaker setup Setting the subwoofer mode Press Subwoofer Mode on the unit → Subwoofer Mode 1 DefaultSubwoofer Mode Adjusting each speaker’s relative volume balance Test toneChanging the default settings according to your connections Tuning into a radio station Press Tuner Tuning in a weak frequency only for FM stationsListening to the radio There are two ways to select radio stationsPresetting radio stations Selecting preset stationsPress Tuner to switch the input source to the tuner Listening to the radioMuting the sound remote controller only Press Muting Listening through headphonesVarious functions common to all the sources Before operating the SP A/SP BVarious functions common to all the sources Using the sleep timer remote controller only Press SleepChanging the display Press Display To fix the Auto to DTS or PCM Setting the input signal formatLevel 5/∞ Using analog multi channel input Enjoying multi channel sourcesBefore operating Direct orEnjoying the listening modes Selecting the listening mode Press one of the listening mode buttonsInput source and available listening mode Enjoying the listening modesBefore operating the remote control Audio adjust functionUsing the audio adjust functions Audio adjust function Late Night Dolby DigitalInput selector buttons Recording a sourceCamera Entering the manufacturer’s code Using the remote controller with your other AV componentsNumeric Using the remote controller with your other AV components Using the RC-518M Use the buttons as explained belowVCR TapeTV mode TV Troubleshooting Amplifier Remote controller Symptoms Causes Remedies PagesTroubleshooting When incorrect operation is observedSymptoms Causes Remedies OtherSpecifications Onkyo Europe Electronics GmbH
Related manuals
Manual 4 pages 57.53 Kb

HT-R410 specifications

The Onkyo HT-R410 is a versatile and robust home theater receiver designed to enhance your audio-visual experience. Launched with features catered to both casual listeners and audiophiles alike, this receiver demonstrates why Onkyo has long been recognized for its commitment to quality and innovation.

At the heart of the HT-R410 is its 5.1 channel design, delivering an impressive total output power of 100 watts per channel. This allows users to fully immerse themselves in their favorite movies, music, and games with surrounding sound that matches the scale of the visuals. The receiver’s built-in Dolby Digital and DTS decoding ensures that audio tracks are reproduced with clarity and dynamism, bringing cinematic experiences to life within your living room.

One of the standout features of the Onkyo HT-R410 is its simple yet effective connectivity options. It includes multiple HDMI inputs, allowing users to hook up multiple devices such as game consoles, Blu-ray players, and streaming devices. The HDMI output supports both video and audio transmission, simplifying the setup and reducing cable clutter. Additionally, the receiver is equipped with legacy inputs, including composite and optical audio inputs, ensuring compatibility with various devices.

The HT-R410 adopts Onkyo’s renowned Dynamic Audio Amplification technology, which optimizes audio quality while minimizing distortion. This not only enhances listening experiences across all genres of music but also ensures a rich, accurate soundstage for films. The receiver's user-friendly interface, along with an easy-to-navigate remote control, allows users to switch between different audio settings and input sources seamlessly.

Furthermore, the Onkyo HT-R410 is designed with energy efficiency in mind, featuring a low standby power consumption rate, which is ideal for eco-conscious consumers. The device is also equipped with an intuitive graphic equalizer, enabling users to tailor sound profiles to suit their preferences or the specific acoustics of their viewing space.

In summary, the Onkyo HT-R410 is a feature-rich home theater receiver that combines quality sound with flexible connectivity. Its capabilities make it a perfect choice for anyone looking to create a cinematic experience at home without compromising on audio fidelity. Whether for action-packed films or serene musical compositions, the HT-R410 stands out for its performance and reliability.