Onkyo TX-DS484 instruction manual Features, Supplied accessories, Memory Preservation

Page 4

Features

55 W/CH TO EACH OF THE FIVE CHANNELS INTO 8 OHMS, 20 Hz—20 kHz, 0.08% THD (North American models, FTC rating)

75 W/CH TO EACH OF THE FIVE CHANNELS INTO 6 OHMS, 1 kHz, DIN (European models, DIN)

100 W/CH TO EACH OF THE FIVE CHANNELS INTO 6 OHMS, 1 kHz, EIAJ (Asian models,EIAJ)

WIDE RANGE AMPLIFIER TECHNOLOGY (WRAT)

6-OHM, HIGH CURRENT, LOW-IMPEDANCE DRIVE FOR ALL 5 CHANNELS

DISCRETE OUTPUT STAGE AMPS FOR ALL 5 CHANNELS

2 HIGH QUALITY EXTRUDED HEAT SINKS

OVERSIZED POWER TRANSFORMER

LARGE, HIGH-QUALITY CAPACITORS

A/B SPEAKER SELECTION

DTS* AND DOLBY** DIGITAL DECODER ONBOARD

DUAL BANANA-PLUG COMPATIBLE TERMI- NALS FOR ALL CHANNELS

96-kHz/24-BIT DAC

5.1 MULTICHANNEL INPUTS

6 DSP SOUNDFIELDS

3 ASSIGNABLE DIGITAL INPUTS (2 COAXIAL & 1 OPTICAL)

LATE NIGHT MODE

PRECISION SPEED-SENSITIVE DIGITAL VOL- UME CONTROL

ABSOLUTE VOLUME DISPLAY

30 FM/AM RANDOM PRESETS

ALUMINUM FRONT PANEL

FULL-FUNCTION REMOTE

*Manufactured under license from Digital Theater Systems, Inc. US Pat. No.5,451,942 and other worldwide patents issues and pending. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.© 1996 Digital Theater Systems, Inc. All rights reserved.

**Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.

Supplied accessories

Check that the following accessories are supplied with this unit.

AM loop antenna 1

FM indoor antenna 1

Remote controller (RC-427S) 1

Batteries (size AA or UM-3) 2

The following accessories are only available for worldwide models.

75/300 ohm antenna

Conversion plug (Shape may

adapter 1

vary depending on the area

 

which it was purchased.) 1

Memory Preservation

This unit does not require memory preservation batteries. A built-in memory power back-up system preserves the contents of the memory during power failures and even when the unit is unplugged. The unit must be plugged in order to charge the back-up system.

The memory preservation period after the unit has been unplugged varies depending on climate and placement of the unit. On the average, memory contents are protected over a period of a few weeks after the last time the unit has been unplugged. This period is shorter when the unit is exposed to a highly humid climate.

Declaration of Conformity

We, ONKYO EUROPE ELECTRONICS GmbH

INDUSTRIESTRASSE 20 82110 GERMERING, GERMANY

declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3 (or EN60555-2, -3).

GERMERING, GERMANY

K.OTSU

ONKYO EUROPE ELECTRONICS GmbH

4

Image 4
Contents TX-DS484 Important Safeguards Precautions Supplied accessories FeaturesMemory Preservation Setting the AM tuning step frequency Worldwide models only Setting the Voltage selector Worldwide models onlyInstalling the remote controller batteries Using the remote controllerAudio equipment connections Input Output RECVideo equipment connections Digital audio connectionsConnecting other devices Decoder with 5.1 channel outputConnections for remote control Connecting other devicesAC outlet connection Connecting speakers Connecting the speaker cableOr B 6 ohms min./speaker Ohms min./speakerConnecting the power Connecting the powerPlug the power cord into an AC wall outlet. Note Positioning speakersConnecting the antenna cable Making antenna connectionsDirectional Iinkage Assembling the AM loop antennaConnecting the included antennas Connecting an FM outdoor antennaConnecting an AM outdoor antenna Making antenna connectionsSpeaker setup Speaker setupSpeaker setup Test Tone Remote controller only Press the Test Tone button to complete adjustmentParameter selector Press the Test Tone buttonSelecting a sound source When Multi channel input is selected as a source Using the Power On Volume functionSelecting a sound source Press the Parameter Controller √ or button to select onSwitching between digital and analog inputs Adjusting the tone BASS, TrebleListening through headphones Phones Sleep function Remote controller onlyTo enjoy Surround mode or Stereo mode Before Using Surround ModeSurround Mode button Late Night button Volume knobTo enjoy Surround mode or Stereo mode Selecting a Surround modeSetting the input signal format Setting the Surround mode parametersAuto Auto Detect mode Tuning in a radio station Manual tuningListening to a stereo radio station FM mode Receiving RDS European model onlyUsing preset radio stations Selecting a preset stationCancelling preset stations Programming radio stationsRecording a source Recording an audio sourceRecording a source Adding new sound to a video tape during video editingTroubleshooting guide Trouble Cause Remedy SeeSpecifications Amplifier SectionControl positions and names Front panel DisplayRemote controller RC-427S Audio muting button Muting 17Using the remote controller Using an Onkyo tape deckUsing an Onkyo CD player Using an Onkyo DVD playerOnkyo U.S.A. Corporation