Onkyo TX-DS484 instruction manual Recording a source, Recording an audio source

Recording a source

•You can record analog Audio, but not digital audio. Make sure that you have made a correct analog connection.

•You cannot record the source connected to MULTI CH INPUT jack.

•If you select another device as the input source during recording, the input signal from that device will be recorded.

•You cannot record audio source along with the surround effects.

1			2
								MASTER VOLUME
STANDBY/ON						PARAMETER SELECTOR		UP
	STANDBY
POWER						PARAMETER CONTROLLER
	PRESET					TUNING
ON OFF
	A SPEAKERS B	SURROUND MODE	LATE NIGHT	DIMMER		MEMORY FM MODE
						CLEAR	BASS	TREBLE
PHONES	MULTI CH INPUT DVD	VIDEO 1 VIDEO 2	TAPE	FM	AM	PHONO	C D
								AV RECEIVER TX-DS484
1·3								3
							Turntable
Tape deck							CD player
(TAPE)							VCR, VDP
							DVD
2		VIDEO 1		VIDEO 2
DVD
FM	AM		PHONO				C D

Recording an audio source

Make all connections between the tape deck and the receiver as shown in the “Audio equipment connections” diagram (page 6).

1.Insert a blank tape into the tape deck.

2.Press the input selector button for the source you want to

record.

•If you select DVD, VIDEO 1 or VIDEO 2, only the audio will be recorded.

•If you select FM or AM, set the tuner to the station you want to record.

3.Set the tape deck in recording mode. Start playing the source.

Set the proper recording level using the controls on the tape deck.

•Please read the corresponding instruction manuals for more information on how to operate the corresponding equipment.

25