Planar C3215 user manual PCI Configuration Status and Error Messages, Message Explanation

Page 55

PCI Configuration Status and Error Messages

The following PCI messages are displayed as a group with bus, device, and function information.

Message

Explanation

Floppy Disk Controller Resource Conflict

The floppy disk controller has requested a

 

resource that is already in use.

 

 

NVRAM Checksum Error,

The ESCD data was reinitialized because of an

NVRAM Cleared

NVRAM checksum error. Rerun the ICU.

 

 

NVRAM Cleared By Jumper

The Clear CMOS DIP switch has been moved

 

to the ON position and CMOS RAM has been

 

cleared.

 

 

NVRAM Data Invalid, NVRAM Cleared

Invalid entry in the ESCD.

 

 

Parallel Port Resource Conflict

The parallel port has requested a resource that

 

is already in use.

 

 

PCI Error Log is Full

This message is displayed when more than 15

 

PCI conflict errors are detected. No additional

 

PCI errors can be logged.

 

 

PCI I/O Port Conflict

Two devices requested the same resource,

 

resulting in a conflict.

 

 

PCI IRQ Conflict

Two devices requested the same resource,

 

resulting in a conflict.

PCI Memory Conflict

Two devices requested the same resource,

 

resulting in a conflict.

 

 

Primary Boot Device Not Found

The designated primary boot device (hard disk

 

drive, diskette drive, or CD-ROM drive) could

 

not be found.

Primary IDE Controller Resource Conflict

The primary IDE controller has requested a

 

resource that is already in use.

 

 

Primary Input Device Not Found

The designated primary input device (key-

 

board, mouse, or other, if input is redirected)

 

could not be found.

Secondary IDE Controller Resource Conflict

The secondary IDE controller has requested a

 

resource that is already in use.

 

 

Serial Port 1 Resource Conflict

Serial port 1 has requested a resource that is

 

already in use.

 

 

Serial Port 2 Resource Conflict

Serial port 1 has requested a resource that is

 

already in use.

Static Device Resource Conflict

A non-plug-and-play device has requested a

 

resource that is already in use.

 

 

Device Resource Conflict

A non-plug-and-play device has requested a

 

resource that is already in use.

 

 

44Planar Clean Screen II PC User’s Manual

Page 54 Page 56
Image 55
Page 54 Page 56
Contents User’s Manual Integrated Computer with LCD Color Display USER’S ManualIi Planar Clean Screen II PC User’s Manual Federal Communications Commission FCC Requirements Commencement of WarrantyCanadian Emissions Requirements Installation Duration of WarrantyPlace of Repair or Replacement Limitation of WarrantyTable of Contents Vi Planar Clean Screen II Screen PC User’s Manual Reference Guide ViiWhat if I’m missing something? Before You BeginWhat’s in the box? What’s in this manual?Clean Screen II Mounts and Accessories Safety InstructionsConnections Bottom Front PanelChapter Four System Setup Chapter One The Installation ExpressClean Screen II Facts Chapter Two The Clean Screen II PCWelcome Chapter Two The Clean Screen II PC Inside Back HousingChapter Two The Clean Screen II PC Removing the Back Housing Chapter Three Hardware Installation and ReplacementTo install a memory module Installing MemoryTo remove a memory module Range CPU address Region Cached Memory MapReplacing the Hard Disk Drive Installing the new hard diskRemoving the existing hard disk Flash memory. See Chapter Five Bios Setup Replacing the BatteryReplacing the Fuse Mounting the Clean Screen PC Card Slot Chapter Four System SetupConnecting the Keyboard Connecting PeripheralsUSB Connection Power SupplyPower Cord Selection Floppy Drive ConnectionDriver Overview Powering Up the Clean Screen II PCPower On Setup F2Entering the Bios Setup Program Chapter Five Bios SetupSetup Screens Main Menu Extended Memory Boot Options Sub-MenuBoot-Time Diagnostic Screen System MemoryMulti-Sector Transfers Primary Master/Slave Sub-Menus under Main MenuAutotype Fixed Disk TypeBit I/O LBA Mode ControlTransfer Mode Ultra DMA ModeBoot Options Sub-Menu under Main Menu Large Disk Access Mode Device Configuration Sub-MenuInstalled OS Win Reset Configuration DataPS2 Mouse PCI Configuration Sub-MenuLegacy USB Support Device Configuration Sub-Menu under Advanced Menu Floppy Disk Controller Standby Timeout Power Management MenuPower Savings Idle ModeResume Time Resume On TimeIDE Monitoring Removable Format Boot MenuHard Drive Removable DevicesExit Menu Approved cleaning solutions include Chapter Six Care and CleaningMaintenance Tips Cleaning TipsAppendix a Product Specifications Optional Resistive Touch Screen Controller External Serial PortsUSB Ports Floppy Disk Drive PortDescription Pin Environmental SpecificationsAssigned and Available IRQs Appendix B Programming InterfaceDMAs Address Device Address ListTroubleshooting Procedure Appendix C TroubleshootingAnti-Virus Alert Causes Boot FailuresProblems After the System Has Been Running Correctly Problems At Initial System StartupProblems Operating PC Cards Problems Running New Application SoftwareProblems with Ethernet What happens What to do Problems and SuggestionsSee Problems at Initial System Start-up Error Message / Beeps Explanation Error and Information MessagesPost Error Message ExplanationMessage Explanation PCI Configuration Status and Error MessagesResetting the System Appendix D Touch Screen optional Cmos ConfigurationFor Further Information and Driver Updates For ServiceAppendix E Technical Support Planar Clean Screen II PC User’s Manual Canada

C3215 specifications

The Planar C3215 is a high-performance display solution designed for a variety of professional and commercial applications. With its sleek design and advanced functionalities, the C3215 stands out as an ideal choice for environments ranging from corporate settings to retail spaces.

One of the primary features of the Planar C3215 is its impressive display quality. The monitor boasts a resolution of 1920x1080 pixels, providing vibrant colors and sharp images that enhance the viewing experience. The LED-backlit technology further improves brightness and energy efficiency, ensuring that users benefit from striking visuals while minimizing power consumption.

The C3215 display is equipped with a wide viewing angle, utilizing in-plane switching (IPS) technology that allows for consistent color accuracy and clarity from various angles. This feature makes it particularly suitable for collaborative workspaces or public displays, where multiple viewers may be observing the screen simultaneously from different positions.

In terms of connectivity, the C3215 is versatile. It offers multiple input options, including HDMI, DisplayPort, and VGA, allowing seamless integration with a variety of devices such as computers, laptops, and media players. This flexibility ensures that users can easily switch between different sources without hassle.

Durability is another key aspect of the C3215. The screen is designed for continuous usage, making it suitable for 24/7 operation in demanding environments. Its robust construction means it can withstand the rigors of daily use, ensuring longevity and reliability.

Moreover, the Planar C3215 incorporates advanced anti-glare technology, reducing reflections and providing users with a clearer view of the content, even in brightly lit settings. This characteristic is essential for environments where lighting conditions can be unpredictable.

For those concerned about installation, the C3215 is designed with user convenience in mind. It supports multiple mounting options, including VESA mounting, which allows users to easily mount the display on walls or use it in conjunction with various stand solutions.

In summary, the Planar C3215 is a feature-rich display that combines superb image quality, durability, and flexible connectivity options, making it an ideal choice for a wide range of applications. Whether for professional use in a corporate environment or for creative displays in retail, the C3215 consistently delivers exceptional performance and reliability.
Top Page Image Contents