Planar C3215 user manual Appendix D Touch Screen optional, Cmos Configuration

Page 57

Appendix D: Touch Screen (optional)

CMOS Configuration

If your Clean Screen II has the optional touch screen installed you will need to enter into CMOS Setup (press <F2>) and configure COM3. The touch screen is physically attached to COM3.

 

PhoenixBIOS Setup Utility

 

I/O Device Configuration

 

 

Local Bus IDE Adapter:

[Primary]

Serial Port A:

[Auto]

Serial Port B:

[Auto]

Mode:

[Normal]

Serial Port C:

[Auto]

Floppy Disk Controller:

[Enabled]

 

 

Item Specific Help

Enable the integrated local bus IDE adapter

F1

Help

↑↓ Select Item

-/+ Change Values

F9

Set Defaults

ESC

Exit

Select Menu

Enter Select Sub-Menu

F10

Save and Exit

Figure D.1 — Integrated Peripherals sub-menu.

1.Select the Advanced menu.

2.Select the Integrated Peripherals sub-menu and press <enter> to move into the sub-menu.

3.Once in the sub-menu you can configure the COM3 base address and IRQ. Select Auto. If enable is selected, you will need to set the base address and IRQ. In most cases 3E8H and IRQ7 are available. Write these down as you may need to reference them later as you run the ELO install program. Do not select OS controlled, your touch screen will not work.

4.Exit by pressing the <escape> key.

5.Exit the CMOS Setup, remember to save your settings on exit.

6.After you have installed your operating system run the ELO install program following the ELO touch screen documentation. This can be found in the !read.me! file stored on the touch screen setup disk.

Technical Note: If you are unsuccessful installing the ELO drivers or if the touch screen has other problems, please contact ELO’s technical support line at (423) 220-4299 or http:\\www.elotouch.com.

46Planar Clean Screen II PC User’s Manual

Image 57
Contents User’s Manual Integrated Computer with LCD Color Display USER’S ManualIi Planar Clean Screen II PC User’s Manual Commencement of Warranty Federal Communications Commission FCC RequirementsCanadian Emissions Requirements Place of Repair or Replacement Duration of WarrantyLimitation of Warranty InstallationTable of Contents Vi Planar Clean Screen II Screen PC User’s Manual Reference Guide ViiWhat’s in the box? Before You BeginWhat’s in this manual? What if I’m missing something?Clean Screen II Mounts and Accessories Safety InstructionsConnections Bottom Front PanelChapter Four System Setup Chapter One The Installation ExpressChapter Two The Clean Screen II PC Clean Screen II FactsWelcome Chapter Two The Clean Screen II PC Inside Back HousingChapter Two The Clean Screen II PC Removing the Back Housing Chapter Three Hardware Installation and ReplacementInstalling Memory To install a memory moduleTo remove a memory module Range CPU address Region Cached Memory MapInstalling the new hard disk Replacing the Hard Disk DriveRemoving the existing hard disk Flash memory. See Chapter Five Bios Setup Replacing the BatteryReplacing the Fuse Mounting the Clean Screen Connecting the Keyboard Chapter Four System SetupConnecting Peripherals PC Card SlotPower Cord Selection Power SupplyFloppy Drive Connection USB ConnectionPower On Powering Up the Clean Screen II PCSetup F2 Driver OverviewChapter Five Bios Setup Entering the Bios Setup ProgramSetup Screens Main Menu Boot-Time Diagnostic Screen Boot Options Sub-MenuSystem Memory Extended MemoryAutotype Fixed Disk Primary Master/Slave Sub-Menus under Main MenuType Multi-Sector TransfersTransfer Mode LBA Mode ControlUltra DMA Mode Bit I/OBoot Options Sub-Menu under Main Menu Installed OS Win Device Configuration Sub-MenuReset Configuration Data Large Disk Access ModePCI Configuration Sub-Menu PS2 MouseLegacy USB Support Device Configuration Sub-Menu under Advanced Menu Floppy Disk Controller Power Savings Power Management MenuIdle Mode Standby TimeoutResume On Time Resume TimeIDE Monitoring Hard Drive Boot MenuRemovable Devices Removable FormatExit Menu Maintenance Tips Chapter Six Care and CleaningCleaning Tips Approved cleaning solutions includeAppendix a Product Specifications USB Ports External Serial PortsFloppy Disk Drive Port Optional Resistive Touch Screen ControllerDescription Pin Environmental SpecificationsAppendix B Programming Interface Assigned and Available IRQsDMAs Address Device Address ListAppendix C Troubleshooting Troubleshooting ProcedureAnti-Virus Alert Causes Boot FailuresProblems After the System Has Been Running Correctly Problems At Initial System StartupProblems Running New Application Software Problems Operating PC CardsProblems with Ethernet What happens What to do Problems and SuggestionsSee Problems at Initial System Start-up Error Message / Beeps Explanation Error and Information MessagesPost Error Message ExplanationMessage Explanation PCI Configuration Status and Error MessagesResetting the System Appendix D Touch Screen optional Cmos ConfigurationFor Service For Further Information and Driver UpdatesAppendix E Technical Support Planar Clean Screen II PC User’s Manual Canada

C3215 specifications

The Planar C3215 is a high-performance display solution designed for a variety of professional and commercial applications. With its sleek design and advanced functionalities, the C3215 stands out as an ideal choice for environments ranging from corporate settings to retail spaces.

One of the primary features of the Planar C3215 is its impressive display quality. The monitor boasts a resolution of 1920x1080 pixels, providing vibrant colors and sharp images that enhance the viewing experience. The LED-backlit technology further improves brightness and energy efficiency, ensuring that users benefit from striking visuals while minimizing power consumption.

The C3215 display is equipped with a wide viewing angle, utilizing in-plane switching (IPS) technology that allows for consistent color accuracy and clarity from various angles. This feature makes it particularly suitable for collaborative workspaces or public displays, where multiple viewers may be observing the screen simultaneously from different positions.

In terms of connectivity, the C3215 is versatile. It offers multiple input options, including HDMI, DisplayPort, and VGA, allowing seamless integration with a variety of devices such as computers, laptops, and media players. This flexibility ensures that users can easily switch between different sources without hassle.

Durability is another key aspect of the C3215. The screen is designed for continuous usage, making it suitable for 24/7 operation in demanding environments. Its robust construction means it can withstand the rigors of daily use, ensuring longevity and reliability.

Moreover, the Planar C3215 incorporates advanced anti-glare technology, reducing reflections and providing users with a clearer view of the content, even in brightly lit settings. This characteristic is essential for environments where lighting conditions can be unpredictable.

For those concerned about installation, the C3215 is designed with user convenience in mind. It supports multiple mounting options, including VESA mounting, which allows users to easily mount the display on walls or use it in conjunction with various stand solutions.

In summary, the Planar C3215 is a feature-rich display that combines superb image quality, durability, and flexible connectivity options, making it an ideal choice for a wide range of applications. Whether for professional use in a corporate environment or for creative displays in retail, the C3215 consistently delivers exceptional performance and reliability.