Pioneer PRO-141FD, PRO-101FD Mount the Flat Panel Display, Anchor the Panel When Using a Stand

Page 15

Install Your Flat Panel Display

02

2.2.3Mount the Flat Panel Display

Because your flat panel display is slim but heavy, have at least two people mount and/or position the panel. The following sections provide instructions for the different mounting and anchoring options.

Anchor the Panel When Using a Stand

When using a stand, stabilize the panel to keep it from tipping over. Please use the metal fittings and screws supplied with the optional stand to anchor the panel to a wall or other solid support structure.

Another option is to purchase hooks, cords, and fittings through your installer or from your local hardware store. The hardware size and strength depends on the composition and thickness of the anchoring surface.

Recommended hook: Nominal diameter 8 mm (3/8 inch), length 12 mm to 18 mm (0.5 inches to 0.7 inches)

To anchor the panel when using the optional stand, follow the steps below.

1 ) Attach the hooks to the mounting holes on the back of the panel.

2 ) Sink the fittings into the wall or support structure.

3 ) Run cords between the hooks and the fittings.

4 ) Tighten the cords until the panel is anchored but not pulled off balance.

1.Hook

2.Cord

Fitting

M8

12 mm to 18 mm

(0.5 inches to 0.7 inches)

(PRO-141FD)

To stabilize the flat panel display on a table or platform, use the metal fittings and screws supplied with the optional stand as well as commercially available wood screws. The wood screws are to anchor the metal fittings when mounting on a wooden surface. These screws should have a nominal diameter of 4 mm (5/32 inch) and are at least 20 mm (13/16 inch) long.

Notes: Avoid moving the table after the panel is attached.

Do not use bare wires for the cord. If any part of the wire is introduced into the ventilation port on the back of the display panel, fire or electrical shock could result.

15

En

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Page Risk of Electric Shock Do not Open Wash hands after handlingTable of Contents Use Other Equipment With Your Flat Panel Display Additional Picture Adjustment OptionsAppendix Helpful InformationShipped with both models Flat Panel Display Shipment ChecklistControl Options Get to Know Your Flat Panel Display Control Buttons and More on the Flat Panel DisplayPRO-141FD/PRO-101FD Face of Panel Insert the Batteries into the Remote Control Operating the Remote ControlOperating Range for the Remote Control Remote Control IssuesButtons on the Remote Control Remote Right side buttons top to bottom, left to right SwapUse the Optional Table Top Stand Stand or Equivalent Items Install Your Flat Panel DisplayUse the Optional Brackets or Equivalent Items Lift and/or Move Your Panel the How To’s Check the Location for SuitabilityMount the Flat Panel Display Anchor the Panel When Using a StandInstall Your Flat Panel Display DVD player Connect to Other Devices DVR, Receiver, BDR, etcHdmi equipment Personal computerCamcorder/Game console Route then Bundle the Power Cord and Cables Connect the Power Cord to the PanelLatch Lever Turn OFF the Flat Panel Display Power Standby Flat Panel Display Status Indicator IndicatorTurn the Flat Panel Display on / OFF Turn on the Flat Panel DisplayProgram Your Flat Panel Display Choose an Input SourceExplore the Home Menu User Menu Function Use the Simplified User MenuAssign a Language Room Lighting Sensor Adjust the Picture QualityAdjust the Picture for Your Room Lighting General Picture Video AdjustmentPicture Picture Image PositionRestore Default Picture All Picture settings return to the original default valuesCompare Images When Adjusting the Picture Set Input Priority Adjust the Power Indicator BrightnessSmart Starts for New Owners Extend Your Panel LifeOption Description Activate Energy Save to Reduce Power UsageTurn On the Image Orbiter Trigger the Screen-Saving Video Pattern PeriodicallySelect between 30 minutes and two hours 120 minutes Turn On the Sleep TimerChoose an AV Option Video, Game, etc AV Source through the Remote ControlChoose an AV Source through the Home Menu Choose a PC SourceSet the Panel to Recognize a Game Console Adjust Specific Picture Elements Choose a Screen Size Automatically or ManuallyAutomatic Screen Sizing Manual Screen Sizing AV Option DescriptionPC Option Description PC Source Correct the Picture for an AV or PC SourceAV Source Option Left Arrow Right ArrowDetect Masks Adjust for Screen Masking black bars on sidesHD Wide Mode Assign Advanced Picture FunctionsLighten Side Masks Restore Default ScreenAll screen settings return to the original default values Select a Color Temperature LevelAdjust the Image Gradation Characteristics Gamma Mode Parameter DescriptionSelect a PureCinema Level for High Quality Image Select an Intelligent Mode Option Select Intelligent Mode from the Pro Adjust menuThis setting applies only to input video signals Use CTI and Color Space Select DRE Picture, Black Level, ACL or Enhancer ModeSelect the Picture Detail Options Option Parameter DescriptionUse the Color Management Left Arrow Right ArrowReduce Noise from the Image Adjust Color Signals View in Multi-Screen Screen Picture-in-Picture P-in-PSplit / Swap / Shift the Screen Turn the Small Screen On/Off Freeze the PictureAV Source Non-Operational Manage the PowerAV Source No Signal PC Source -Power ManagementProgram the Remote Control to Operate Other Equipment Use the Learning FunctionPress Select to choose the other device Press Select to choose the device to program Assign a Manufacturing Code to the Remote ControlIssue a Library Search for a Manufacturer Code Selected mode indicator flashes when the remote control isControl a Pioneer Receiver Clear Added Manufacturer Codes from the Remote ControlSelection can be in any mode Control of some equipment listed in the tablesCH Enter Control a Cable CBL or Satellite SAT SystemPlay Control a Video Cassette Recorder VCRDVD TOP Menu Control a DVD Player/DVR Recorder/BD PlayerDVI Equipment Apply Settings for Other EquipmentApply Settings for an AV System Composite/Component Video SystemManual Image Position and Clock Adjustments Apply Settings for a PCAccess Input 3D-Sub15 through the Input Setup menu Automatic Image Position and Clock AdjustmentsEnter an Hdmi Input Name Use Hdmi InputsSpecify a Digital Hdmi Signal Type Specify the Hdmi Input TypeType Description Control Function Controlled Function Description Equipment Control Equipment with the Panel’s Remote Through HdmiTools Control an AV System Select Input Setting from the submenuControl a Player Control a RecorderAV Amp & BD Player BD Player only Add an AV Amp or a BD PlayerTurn OFF the Power With an Hdmi Command Specific Kuro Link CommandsPlay Source Sound Using an Hdmi Command Access Kuro Link Setting through the Control Setup menuUse the IR Repeater OUT Test the Power Control On/OffAccess Kulo Link Setting through the Control Setup menu Connect a Game Console or CamcorderConnect to a Network Confirm the IP Address IP Control SettingAccess IP Control Setting through the Control Setup menu Select IP Control from the IP Control Setting menuUse the Web Control System Display SettingsPicture Adjustments Virtual Remote Control SettingsTerminal Function SettingMail Event NotificationAssign an ID Number Assign a Serial NumberStatus information on the selected input appears on screen Select the Integrator ModeAccess Serial Setting through the Control Setup menu Assign a Baud RateMonotone Mode Explore the Integrator Mode MenusPicture Preset Studio ModeOn-screen Display Drive ModeFRC Mode Fan ControlPower On Mode Mirror ModeBanner PIP Network ID Beacon IP Control LockFrequently Asked Questions FAQs Why won’t my Pioneer flat panel display turn on?How can I protect the remote so it holds up longer? Cleaning Methods How do I clean my flat panel display?What can I do to prevent image retention or burn-in? Picture Troubleshooting & Service InformationIssue Possible Solutions GeneralDevice cannot be Operated. Please checkConnection Helpful Information Installation Details Physical Location & Temperature ConsiderationsUsage Guidelines Signal Interference or Noise Phosphor PropertiesImage Information Including Retention & After-Image Lag Prevent Burning Operating Environment Safety PrecautionsSafety Legal NoticesRadio Interference Information to UserFor Canadian model NTL Manufacturer Codes to Program into the Remote ControlCable Brand/Code Brand/Code Brand/Code Brand/Code Brand/CodeGOI SatelliteBrand/Code 3 VCR HI-Q General Technic 0348 Genexxa 0000, 0037MEI NADSBR NAPBDP Blu-ray DVD-R JVCGPX 6 DVD MDS RECMPX MBOWize 7 LDXMS TSMVideo/PC Signals HDMI/DVI/Component/min D-Sub/Composite Input 1 Video SignalsInput 2 Component/INPUT 3 D-Sub Video Signals Analog Input 4 DVI/INPUT 5 through 8 Hdmi Video Signals Digital Input 3 D-Sub PC Signals Analog Resolution Screen ModeDot-Line KHz Input 4 DVI/INPUT 5 through 8 Hdmi PC Signals Digital Dot-Line KHz HzCVT 47.7 60.0 Yes Specifications Trademarks TrademarksGlossary POP before Smtp DhcpUser IndexGame StandardPioneer Corporation

PRO-101FD, PRO-141FD specifications

The Pioneer PRO-141FD and PRO-101FD are two remarkable models in the realm of professional audio equipment, specifically designed for individuals seeking superior sound quality and performance. These devices boast features that cater to diverse audio requirements, making them ideal choices for sound engineers, musicians, and audio enthusiasts alike.

One of the standout characteristics of both the PRO-141FD and PRO-101FD is their exceptional sound reproduction capabilities. The units are equipped with advanced drivers that ensure a clear, balanced sound across all frequencies. This includes an extended low-end response that provides the depth needed for strong bass performance, as well as crisp highs that capture intricate details in vocals and instruments. This versatility makes them suitable for a wide range of applications, from live performances to studio recordings.

In terms of build quality, both models are designed with durability in mind. Constructed from robust materials, they can withstand the rigors of professional use while remaining lightweight for easy transport. The cabinets are designed to minimize resonance and interference, which enhances the overall audio experience. This combination of durability and design ensures that users can rely on these units in demanding environments.

Technologically, the Pioneer PRO series implements advanced audio processing algorithms to deliver outstanding clarity and precision. These models include features such as multiple EQ settings, allowing users to customize their sound profile to suit different environments and personal preferences. Additionally, the PRO-141FD and PRO-101FD are designed to support various connectivity options, including Bluetooth, XLR, and TRS inputs, making them incredibly versatile for different audio setups.

Another key feature is the efficiency of power management in these models. They are engineered to provide maximum output while consuming minimal power, ensuring longer operating times and reduced energy costs. This is particularly beneficial for users who rely on their equipment for extended periods, such as during tours or extended recording sessions.

The ergonomics of the Pioneer PRO series also set them apart. User-friendly controls and intuitive interfaces allow for quick adjustments during live settings, enabling performers and sound engineers to focus on the performance rather than the equipment.

In summary, the Pioneer PRO-141FD and PRO-101FD are equipped with impressive sound quality, durable construction, advanced technology, versatile connectivity, and user-friendly design. These attributes make them stand out in the competitive audio equipment market, catering to both casual users and professional audiophiles. Whether for live sound applications or studio work, these models offer an excellent solution for anyone seeking high-quality audio performance.
Top Page Image Contents