Basic Picture Adjustment | 04 |
4.2.4Turn On the Image Orbiter
A
To activate Orbiter, follow the steps below.
1 ) Access Orbiter through the Option menu.
2 ) Select Mode 1, Mode 2 or Off.
•AV source Mode 1: for any screen mode except Dot by Dot
•AV source Mode 2: for all available screen modes
•PC source Mode 1: to enable Orbiter
•PC source Mode 2: to smooth the text/character appearance
3 ) Press HOME MENU to exit the menu.
Note: The farthest edges of an image may be hidden at times as the picture position shifts. Also, when the Orbiter function is set to Mode 1 or Mode 2, the image may appear to drop slightly on the screen.
4.2.5Trigger the Screen-Saving Video Pattern Periodically
The Video Pattern function causes the screen to appear white, which helps to alleviate
To activate the Video Pattern screen, follow the steps below.
1 ) Access Video Pattern through the Option menu. A confirmation screen appears.
2 ) Select Start from the submenu. The Video Pattern screen appears.
3 ) Leave the panel alone for a minimum of one hour.
Note: The Video Pattern timer has priority over Sleep Timer, No Signal Off, and No Operation Off (Power Management) settings.
4.2.6Activate Energy Save to Reduce Power Usage
The Energy Save option decreases picture brightness and lowers power consumption. The recommended setting, Save 1, extends the life of your panel while keeping power usage at a minimum.
Follow the steps below to activate an Energy Save option.
1 ) Access Energy Save through the Power Control menu.
2 ) Select an option from the Energy Save submenu.
Option | Description |
|
|
Standard | No effect |
|
|
Save 1 | consumes less power than Standard |
|
|
Save 2 | consumes less power than Save 1 |
|
|
Picture Off | activates Picture Off when closing the Home Menu |
| with this option selected |
|
|
3 ) Press HOME MENU to exit the menu.
Note: To deactivate the screen, select Picture Off.
29
En