Use Other Equipment With Your Flat Panel Display
To delete a learned code, overwrite it with a new code on the same button or follow the directions below. 1 ) Simultaneously press the EDIT/LEARN and 2 buttons to begin.
The selected mode indicator flashes when the remote control is ready to be programmed.
2 ) Press and hold MONITOR a for at least two seconds.
The remote control starts deleting all learned codes for selected modes. When completed, the mode indicator blinks Off and the remote control returns to normal operation.
6.1.2Assign a Manufacturing Code to the Remote Control
To assign a preset Manufacturing code to the panel’s remote control, | 1 | 2 | 3 | 4 |
follow the directions below (Manufacturing codes are listed in section |
|
|
|
|
“9.1 Manufacturer Codes to Program into the Remote Control”). | 5 | 6 | 7 | 8 |
| ||||
|
| SUB |
| PIP |
|
| INPUT |
|
|
| SELECT | MONITOR STB | BDP | EDIT/LEARN |
1 ) Press SELECT to choose the device to program. |
| LD | VCR | |
| CBL | DVD |
| |
|
| SAT | DVR |
|
2 ) Simultaneously press the EDIT and 1 buttons to begin.
The selected mode indicator flashes when the remote control is ready to be programmed.
3 ) Use the number buttons to enter a manufacturer code. When the indicator turns off, the code has been stored in the remote control.
Factory default manufacture codes:
STB
BDP/LD/DVD/DVR: Pioneer (2052)
VCR (VTR): Pioneer (0058)
6.1.3Issue a Library Search for a Manufacturer Code
If the code for a particular device is unknown, cycle through the available | 1 | 2 | 3 | 4 | |
codes for a similar unit then sample some functions for that code. | |||||
|
|
|
| ||
| 5 | 6 | 7 | 8 | |
To find a code that can control the unit, follow the steps below using | EXIT | SUB |
| USERPIPMENU | |
|
|
|
| ||
different codes to find the best match. | GUIDE |
|
| TOOLS | |
| TOPMENU |
|
|
ENTER
1 ) Press SELECT to choose the device to program.
| HOME |
|
| RETURN |
2 ) Simultaneously press the EDIT and 3 buttons to begin. | MENU |
|
| |
|
|
|
| |
The selected mode indicator flashes when the remote control is | MENU |
|
|
|
ready to search the code library. |
|
|
|
|
3 ) Sample a code using a SOURCE POWER, PLAY, 1 or CH+ | ONDEMAND FAVORITE |
|
| |
|
|
|
| |
command. | SOURCE |
|
| DVD/HDD |
4 ) Use the up/down arrow (/) buttons to advance to the next code |
| RECEIVER | VOL | |
if the sampled code fails to control the device. |
|
|
| |
| INPUT |
|
| |
Another option is to return to the previous code and repeat Step 3. | SELECT | MONITOR STB | LD | VCR |
|
| BDP | EDIT/LEARN | |
5 ) Press ENTER to lock in the code that properly operates the device. |
| CBL | DVD |
|
| SAT | DVR |
| |
|
|
| ||
All the available buttons for the selected mode are added when the |
|
|
|
|
mode indicator flashes on for one second. The remote control then |
|
|
|
|
returns to normal operation. |
|
|
|
|
06
47
En