02Install Your Flat Panel Display
Follow the steps below to secure your flat panel display.
1) Mark locations for metal fittings and screws on the back edge of the table using the panel stand to determine placement.
Wood screw (commercially available, 4 mm x 20 mm (5/32 inch x 13/16 inch) min.)
Falling prevention metal fitting (supplied with the optional stand)
2 ) Drill holes in the table or platform edge at the marked locations.
3 ) Lift panel into place with the assistance with at least one other person.
4 ) Use wood screws (not included) to secure the metal fittings to the table.
16
En