Pioneer PRO-101FD, PRO-141FD manual Drive Mode, FRC Mode, Fan Control, On-screen Display

Page 72

06Use Other Equipment With Your Flat Panel Display

Drive Mode

This option optimizes the picture quality depending on the content (refer to “5.3.10 Adjust Color Signals” for more information).

Note: Drive Mode is available only for input video signals.

FRC Mode

The FRC option allows switching the frame rate conversion.

Parameter	Description

Default*	does not switch the frame rate conversion

Sync	switches the frame rate conversion

	*Factory default

Note: FRC Mode is available only for input PC signals.

Fan Control

This option switches the control method for the rear cooling fan of the flat panel display.

Parameter	Description

Auto*	automatically controls using an internal
	temperature sensor

Max	for maximum rpm (Auto Control: Off)

	*Factory default

The Max setting is effective for special high-temperature installations. However, since the fan noise increases, the effect on the surrounding area should be taken into consideration.

On-screen Display

This option sets the menu display to On or Off.

Parameter	Description

On*	displays the current menu when pressing DISPLAY

Off	does not display the screen when:
	• pressing DISPLAY or AV SELECTION
	• switching the input source
	• adjusting the volume
	(Screen components such as Home Menu, User
	Menu and messages remain on the screen even
	when setting the On-screen Display option to
	Off.)

	*Factory default

Note: This setting applies to all input sources.

72

En

Image 72

Contents Page Wash hands after handling Risk of Electric Shock Do not OpenTable of Contents Additional Picture Adjustment Options Use Other Equipment With Your Flat Panel DisplayHelpful Information AppendixFlat Panel Display Shipment Checklist Shipped with both modelsControl Options Get to Know Your Flat Panel Display Control Buttons and More on the Flat Panel DisplayPRO-141FD/PRO-101FD Face of Panel Operating the Remote Control Insert the Batteries into the Remote ControlRemote Control Issues Operating Range for the Remote ControlButtons on the Remote Control Swap Remote Right side buttons top to bottom, left to rightInstall Your Flat Panel Display Use the Optional Table Top Stand Stand or Equivalent ItemsUse the Optional Brackets or Equivalent Items Check the Location for Suitability Lift and/or Move Your Panel the How To’sAnchor the Panel When Using a Stand Mount the Flat Panel DisplayInstall Your Flat Panel Display Connect to Other Devices DVR, Receiver, BDR, etc DVD playerHdmi equipment Personal computerCamcorder/Game console Connect the Power Cord to the Panel Route then Bundle the Power Cord and CablesLatch Lever Power Standby Flat Panel Display Status Indicator Indicator Turn the Flat Panel Display on / OFFTurn on the Flat Panel Display Turn OFF the Flat Panel DisplayProgram Your Flat Panel Display Choose an Input SourceExplore the Home Menu Use the Simplified User Menu User Menu FunctionAssign a Language Adjust the Picture Quality Adjust the Picture for Your Room LightingGeneral Picture Video Adjustment Room Lighting SensorPicture Image Position PictureRestore Default Picture All Picture settings return to the original default valuesCompare Images When Adjusting the Picture Adjust the Power Indicator Brightness Smart Starts for New OwnersExtend Your Panel Life Set Input PriorityActivate Energy Save to Reduce Power Usage Turn On the Image OrbiterTrigger the Screen-Saving Video Pattern Periodically Option DescriptionTurn On the Sleep Timer Select between 30 minutes and two hours 120 minutesAV Source through the Remote Control Choose an AV Option Video, Game, etcChoose an AV Source through the Home Menu Choose a PC SourceSet the Panel to Recognize a Game Console Adjust Specific Picture Elements Choose a Screen Size Automatically or ManuallyAutomatic Screen Sizing Manual Screen Sizing AV Option DescriptionPC Option Description Correct the Picture for an AV or PC Source AV SourceOption Left Arrow Right Arrow PC SourceAdjust for Screen Masking black bars on sides HD Wide ModeAssign Advanced Picture Functions Detect MasksRestore Default Screen All screen settings return to the original default valuesSelect a Color Temperature Level Lighten Side MasksAdjust the Image Gradation Characteristics Gamma Mode Parameter DescriptionSelect a PureCinema Level for High Quality Image Select an Intelligent Mode Option Select Intelligent Mode from the Pro Adjust menuThis setting applies only to input video signals Select DRE Picture, Black Level, ACL or Enhancer Mode Select the Picture Detail OptionsOption Parameter Description Use CTI and Color SpaceUse the Color Management Left Arrow Right ArrowReduce Noise from the Image Adjust Color Signals View in Multi-Screen Screen Picture-in-Picture P-in-PSplit / Swap / Shift the Screen Freeze the Picture Turn the Small Screen On/OffManage the Power AV Source No SignalPC Source -Power Management AV Source Non-OperationalProgram the Remote Control to Operate Other Equipment Use the Learning FunctionPress Select to choose the other device Assign a Manufacturing Code to the Remote Control Issue a Library Search for a Manufacturer CodeSelected mode indicator flashes when the remote control is Press Select to choose the device to programClear Added Manufacturer Codes from the Remote Control Selection can be in any modeControl of some equipment listed in the tables Control a Pioneer ReceiverControl a Cable CBL or Satellite SAT System CH EnterControl a Video Cassette Recorder VCR PlayControl a DVD Player/DVR Recorder/BD Player DVD TOP MenuApply Settings for Other Equipment Apply Settings for an AV SystemComposite/Component Video System DVI EquipmentApply Settings for a PC Access Input 3D-Sub15 through the Input Setup menuAutomatic Image Position and Clock Adjustments Manual Image Position and Clock AdjustmentsUse Hdmi Inputs Enter an Hdmi Input NameSpecify a Digital Hdmi Signal Type Specify the Hdmi Input TypeType Description Control Equipment with the Panel’s Remote Through Hdmi Control Function Controlled Function Description EquipmentTools Select Input Setting from the submenu Control an AV SystemControl a Recorder Control a PlayerAdd an AV Amp or a BD Player AV Amp & BD Player BD Player onlySpecific Kuro Link Commands Play Source Sound Using an Hdmi CommandAccess Kuro Link Setting through the Control Setup menu Turn OFF the Power With an Hdmi CommandTest the Power Control On/Off Access Kulo Link Setting through the Control Setup menuConnect a Game Console or Camcorder Use the IR Repeater OUTConnect to a Network IP Control Setting Access IP Control Setting through the Control Setup menuSelect IP Control from the IP Control Setting menu Confirm the IP AddressDisplay Settings Use the Web Control SystemVirtual Remote Control Settings Picture AdjustmentsFunction Setting TerminalEvent Notification Mail Assign a Serial Number Assign an ID NumberSelect the Integrator Mode Access Serial Setting through the Control Setup menuAssign a Baud Rate Status information on the selected input appears on screenExplore the Integrator Mode Menus Picture PresetStudio Mode Monotone ModeDrive Mode FRC ModeFan Control On-screen DisplayPower On Mode Mirror ModeBanner PIP IP Control Lock Network ID BeaconFrequently Asked Questions FAQs Why won’t my Pioneer flat panel display turn on?How can I protect the remote so it holds up longer? Cleaning Methods How do I clean my flat panel display?What can I do to prevent image retention or burn-in? Troubleshooting & Service Information Issue Possible SolutionsGeneral PictureDevice cannot be Operated. Please checkConnection Helpful Information Installation Details Physical Location & Temperature ConsiderationsUsage Guidelines Signal Interference or Noise Phosphor PropertiesImage Information Including Retention & After-Image Lag Prevent Burning Safety Precautions SafetyLegal Notices Operating EnvironmentRadio Interference Information to UserFor Canadian model Manufacturer Codes to Program into the Remote Control CableBrand/Code Brand/Code Brand/Code Brand/Code Brand/Code NTLSatellite GOIBrand/Code 3 VCR General Technic 0348 Genexxa 0000, 0037 HI-QNAD SBRNAP MEIBDP Blu-ray DVD-R JVCGPX 6 DVD REC MPXMBO MDS7 LD XMSTSM WizeVideo/PC Signals HDMI/DVI/Component/min D-Sub/Composite Input 1 Video SignalsInput 2 Component/INPUT 3 D-Sub Video Signals Analog Input 4 DVI/INPUT 5 through 8 Hdmi Video Signals Digital Input 3 D-Sub PC Signals Analog Resolution Screen ModeDot-Line KHz Input 4 DVI/INPUT 5 through 8 Hdmi PC Signals Digital Dot-Line KHz HzCVT 47.7 60.0 Yes Specifications Trademarks TrademarksGlossary Dhcp POP before SmtpIndex GameStandard UserPioneer Corporation