Planar LC12 manual Display Performance

1-msec (max)
Initial inrush current
Power Supply Limit
	25-amp
	20-amp
	15-amp
11-amp (max)	10-amp
4.3 amp (max) steady -state	5-amp
3-amp (max) steady-state
25-msec (max)	0-amp
Stabilization

Time Scale: 10-msec / div

Figure 9. Current Profile: Note 3 amp figure is incorrect; use 4.3 amp as specified above.

5.3Power On-Off Sequences

The Monitor will automatically return to normal operation upon resumption of power after a power loss.

6.0Display Performance

6.1Display Luminance

The display provides one level of luminance used for both daylight and night viewing.

Minimum white-light luminance at the screen center of the Monitor face is 1500 cd/m2 [467 fL] in a darkened room environment with ambient light conditions less than 10 LUX [1fC] incident illumination and at room temperature. Reference: MIL-L-85762A (3.10.2.2.3). Luminance specification applies to the initial luminance, i.e. prior to additional operation in the end system.

Luminancemin?> 1,500cd/m2 [467 fL]

6.2Display Contrast

Display contrast is a relationship between luminance levels and the ability to perceive a luminance difference. It is expressed as a ratio of ON white – luminance to OFF black background luminance generated by the display.

Title: Product Specification: LC12 High-Bright Monitor	Page 16 of 24
Document Number: 023-0284-01	Revision: A