Sweep for 15 minutes, three axes, x, y, z

Power spectrum is referenced per MIL STD 810 E Environmental Test Method 505.3, Table -II Spectral Energy Distribution and permitted tolerances

Maximum solar power flux = 1120 watts/m2 at 65 degrees normal to the Monitor surface.

These values assume no solar radiation attenuation from the customer-supplied vandal shield.

3.3Altitude

Maximum operating altitude is 3,000 meters [9,850 feet]. Maximum shipping and storage altitude is 12,000 meters [39,400 feet].

3.4Mechanical Vibration and Shock

Note: Tests performed with unpackaged Monitors are mounted in a Planar approved rigid retaining fixture.

3.4.1	Vibration
	Non-Operating (sinusoidal):	10-200 Hz, 0.9g acceleration, 120 seconds per
		sweep for 15 minutes, three axes, (x, y, z).
		Following exposure unit shall meet all
		performance requirements.
	Non-operating (random):	10-200 Hz, 0.02g2/Hz, 10 min/axis, three (x, y, z).
		Following exposure unit shall meet all
		performance requirements.
3.4.2	Shock
	Non-operating:	30 g, > 2.5 ms duration, ½ sine, 1 shocks per axis.
		Following exposure unit shall meet all
		performance requirements.

3.4.3Shock Packaged Product

Non-operating:	30 inch free fall or simulated drop, 1 drop per side, 6
	sides and 1 drop per edge, 3 edges 1 shocks per axis.
	With accelerometer attached to center of product
	display screen, a maximum of 50 G’s is allowed.
	Following exposure unit shall meet all performance
	requirements.
		Y(rear)
DISPLAY		X(side)
		X(side)

	Z (bottom)
Figure 3. Monitor unit orientation 1
Title: Product Specification: LC12 High-Bright Monitor		Page 8 of 24
Document Number: 023-0284-01		Revision: A