Planar LC12 manual Room Ambient Contrast

Page 17

6.2.1Room Ambient Contrast

Minimum Contrast of the display under room ambient lighting conditions of 1076 LUX [100 fC] direct incident illumination, is > 90:1. Reference MIL-L-85762A (Table II).

6.2.2High Ambient Contrast

Minimum Contrast of the display in a diffuse off-axis illumination of 86,080 LUX [8,000 fc] and a specular on axis luminance (sky) of 6,853 cd/m2 [2000 fL] is > 6:1. Reference MIL-L-85762A (Table II).

6.3Display Uniformity

Luminance Uniformity (UL) measured within 30 mm from edge of the display image area is + 40% of the luminance measured at the center of the display screen.

6.4Display Chromaticity

The metric used for color coordinate determination is the CIE 1976 UCS (Uniform Chromaticity Scale) u’, v’ system.

Color determination is performed normal to the display in a dark room environment with ambient light conditions less than 10 LUX [1fC] incident illumination.

The measured u’, v’ color coordinates at room temperature for White-light and the Red, Green, and Blue primaries are listed for reference purposes only.

Color

u?

v?

Perceived Color

 

 

 

 

Red

0.449

0.517

Red

Blue

0.144

0.299

Blue

Green

0.142

0.559

Yellowish-Green

White

0.215

0.489

Warm White

White color is concentrated around 5600oK color temperature.

6.5LCD Panel - Physical Image Characteristics

The Monitor incorporates a matrix display with the following features:

LCD Size:

307.5mm [12.11in] diagonal

Active Area:

246.0mm [9.69in] by 184.5mm [7.26in]

Pixel Format:

800 (H) x 600 (V) (1 full color pixel = R + G + B dots)

Pixel Pitch:

0.3075mm [0.012in] horizontal x 0.3075mm [0.012in] vertical

Pixel Arrangement:

R,G,B vertical stripe

Title: Product Specification: LC12 High-Bright Monitor

Page 17 of 24

Document Number: 023-0284-01

Revision: A

Image 17
Contents LC12 High-Bright Monitor Table of Contents Design Workload Critical Failures Failure Definition 262,144 IntroductionBasic Construction Page Tair @ EnvironmentalHours Tair @ 60C HoursFollowing exposure unit shall meet all Sweep for 15 minutes, three axes, x, y, zPerformance requirements Non-operating randomVideo Signal Connector Pin Number Assignments Video Signal Input RequirementsRed video return Blue video returnOvershoot High POS Steady Level Border Video Mode Definitions Color Display DetectionHorizonta Vertical Timing and Frequency Video, Horizontal And Vertical Sync Vertical SyncHorizontal Scan Freq Resolution 640x400 640x480 800x600 1024x768 Video ClockHorizontal Line PeriodVideo Modes DC Power Input Lines DC Power Input RequirementsMost Positive Input Voltage Most Negative Input VoltageDisplay Performance Room Ambient Contrast Display Cosmetics Regulatory Agency Requirements ∙ Electromagnetic Immunity ReliabilityDescription of Warranty Glossary of Terms and Abbreviations Support and servicePage REV Date Description of Change Revision History