Planar LC12 manual Basic Construction

Page 5

2.0Basic Construction

2.1Weight

Monitor weight does not exceed 5 Kgs (11 lbs).

2.2Mechanical Mounting Requirements

Per Planar Mechanical Outline drawing 074-0666-01

2.3Monitor Electronics

Electronic components requiring heat sinks are installed independent of the Monitor enclosure. That is, its sheet metal chassis is not used as a heat sink for any electronic component.

2.4Cooling Fan

Cooling fans are installed to maintain appropriate internal operating temperatures when the Monitor is subjected to its operating environment of Section 3. Forced air convection is used to cool the LCD Panel (front and back).

2.5Vandal Glass

The Monitor is designed to operate with a vandal glass 289 mm x212 mm x 10 mm in place. This vandal glass in not provided with the Monitor.

2.6Air Filtration

An air filter mesh is included to prevent ingress of insects and ensure continual flow of cooling air within the Monitor. The air filter mesh is externally accessible for cleaning.

2.7Connectors

There are two (2) connectors supplied as an integral part of the Monitor.

2.7.1Video Signal Connector

The Monitor unit includes a chassis mounted 15-pin female mini D-Shell connector (AMP 748390-5 or equivalent) with socket contacts at the rear of the Monitor. It is shielded for electromagnetic interference (EMI) purposes. Refer to Section 4.1 for electrical connections.

2.7.2DC Power Input Connector

The DC power input connector is a chassis mounted 2-pin "MAT?N?LOK" style connector (AMP 1-480699-0 or equivalent) with pin contacts at the rear of the Monitor. Connections are insulated to insure no accidental contact.

Title: Product Specification: LC12 High-Bright Monitor

Page 5 of 24

Document Number: 023-0284-01

Revision: A

Page 4 Page 6
Image 5
Page 4 Page 6
Contents LC12 High-Bright Monitor Table of Contents Design Workload Critical Failures Failure Definition 262,144 IntroductionBasic Construction Page Tair @ EnvironmentalHours Tair @ 60C HoursFollowing exposure unit shall meet all Sweep for 15 minutes, three axes, x, y, zPerformance requirements Non-operating randomVideo Signal Connector Pin Number Assignments Video Signal Input RequirementsRed video return Blue video returnOvershoot High POS Steady Level Border Video Mode Definitions Color Display DetectionHorizonta Vertical Timing and Frequency Video, Horizontal And Vertical Sync Vertical SyncHorizontal Scan Freq Resolution 640x400 640x480 800x600 1024x768 Video ClockHorizontal Line PeriodVideo Modes DC Power Input Lines DC Power Input RequirementsMost Positive Input Voltage Most Negative Input VoltageDisplay Performance Room Ambient Contrast Display Cosmetics Regulatory Agency Requirements ∙ Electromagnetic Immunity ReliabilityDescription of Warranty Glossary of Terms and Abbreviations Support and servicePage REV Date Description of Change Revision History
Top Page Image Contents