Planar C3i/EX manual About the Display, System Requirements

Page 11

About the Display

The Dome CX/Dome EX display systems, ranging from 2 to

5 megapixels, consists of a TFT LCD panel and a display board and driver. The display’s thin film transistors, in a transmissive-type display, use an integrated cold cathode fluorescent tube (CCFT) backlight system.

The display is designed for medical imaging in diagnostic settings, in portrait or landscape orientation, and comes fully tuned with gamma correction that complies with the DICOM Part 14 Standard. The all- digital design enables the display to produce the sharp, crisp images critical to softcopy medical viewing. Unwanted analog display image artifacts are eliminated.

Bundled with the display system, the Dome CXtra software enhances the functionality of the Dome EX display with a range of value-added services, such as DICOM calibration and error reporting. For more information, refer to Dome CXtra User’s Guide.

System Requirements

•PCI slot per board (PCI66 recommended)

•2 MB hard disk space for installation of driver, DDX, and documentation

•CD-ROM drive

•Solaris 2.5.1 to 10 operating system

NOTE: For users upgrading from Dome C3i to Dome EX display, see instructions on page 5.

Image 11

Contents

User’s Guide 020-0377-01A Contents Product Information Intended use Symbol explanationsSafety tips Safety precautions Preventing fire and injury Unpacking and handling tipsCleaning the display Disposal information Shipping/storing the displayDVI cable System Requirements About the DisplayDisplay Components Tilt range Height range Display PositionsStand cable cover Desk Stand FeaturesMoving from Dome C3i to Dome EX Display System Installing the DisplayTo set landscape mode as default display mode Set the DIP Switch on the Dome DX2 BoardTo disable VGA To enable EpromTo install the display controller Install the Display ControllerTo connect the cables Connect the Video and Power CablesRequired Sun software packages Install Dome DX2 Driver and Dome CXtra SoftwareInstallation preparation To install the driver and Dome CXtra Installing the Display Configure Display Settings To edit the OWconfig file Overriding the default display modeDome Display To modify the OWconfig file Using visual classes To emulate a PseudoColor visual class To check the default visualSunallplanes Shape MIT-SHM Look Default visual id For visual Dome Display Running OpenWindow from the console Configure the Window EnvironmentConfiguring the Common Desktop Environment To use a Dome device with a Sun console To use one or more Dome devicesScreen saver tips Dpms Screen SaverTo set the Dpms Screen Saver Console Modification To use the setenv commandDome CXtra Software Appendix Problem Possible Cause Solution TroubleshootingCategory Characteristic Item Specification Dome C3i SpecificationEnvironment Power SupplyReliability Dome E2 Specification Power Supply Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Display Mtbf 50,000 hours Backlight 2560 x Video ModesDetails of DIN connectors Connector PortsLED Status Lights Power-up sequence information from LED Index 21-22 Canada, European Union, United States Regulatory CompliancePage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement Korea AustralianChina JapanSummary Standard WarrantyStandard Warranty Return Procedure Limitation of Implied Warranties Summary Limitations and Exclusions of Dome DisplaysEffect of Local Law Exclusion of DamagesMedicalsales@planar.com Medicalsupport@planar.com