Planar C3i/EX manual Dome E2 Specification

Page 41

Dome E2 Specification

In locations where 240V outlets are used, connect the Dome E2 display to only a center- tapped, 240V, single-phase supply (only for Canada and the United States).

Category

Characteristic Item

Specification

 

 

 

Screen

Screen size diagonal

498 mm (19.6 in.)

 

Resolution

1200 x 1600 pixels (portrait)

 

 

1600 x 1200 pixels (landscape)

 

Pixel pitch

0.249 mm x 0.249 mm

 

Pixel arrangement

Subpixel vertical stripe

 

Active area (mm)

398.4 (H) x 298.8 (V)

 

Grayscale supported

3061 shades of gray

 

Refresh rate

60 Hz

 

Contrast ratio

600:1 (typical)

 

Brightness

900 cd/m2 (when new)

 

Pixel rise/fall time

40 ms (typical)

 

Viewing angle

170° (± 85°) horizontal/vertical

 

 

 

Interface

Digital Video In

DVI Rev. 1.0 single-channel digital connector

 

 

 

 

Display control - brightness

DDC2B+

 

Display identification

EDID read using DDC2B+

 

USB hub

Universal Serial Bus (USB) Rev. 1.1:

 

 

1 uplink B port; 2 downlink A ports

 

Display status

Dual-stack tricolor LEDs on back panel

 

 

 

Input formats

Landscape orientation

1600 x 1200 (8-bit per pixel)

 

Portrait orientation

1200 x 1600 (8-bit per pixel)

 

Screen type

AMLCD (active matrix liquid crystal display)

 

 

 

Physical

Display size (without stand)

440 mm x 343 mm x 95 mm

 

 

(17.3 in. x 13.5 in. x 3.75 in.)

 

Display weight (without stand)

5.5 kg (12 lb)

 

Mounting options

Desktop stand (standard);

 

 

100-mm VESA mounting (optional)

 

 

 

Power

Adapter

Ault MW116KA1249F53 (CAUTION: Use only the

 

 

power adapter supplied with the display unit.)

 

 

 

Dome E2 Specification 31

Image 41
Contents User’s Guide 020-0377-01A Contents Product Information Intended use Symbol explanationsSafety tips Safety precautionsPreventing fire and injury Unpacking and handling tipsCleaning the display Disposal information Shipping/storing the displayDVI cable System Requirements About the DisplayDisplay Components Tilt range Height range Display PositionsStand cable cover Desk Stand FeaturesMoving from Dome C3i to Dome EX Display System Installing the DisplayTo disable VGA Set the DIP Switch on the Dome DX2 BoardTo enable Eprom To set landscape mode as default display modeTo install the display controller Install the Display ControllerTo connect the cables Connect the Video and Power CablesRequired Sun software packages Install Dome DX2 Driver and Dome CXtra SoftwareInstallation preparation To install the driver and Dome CXtra Installing the Display Configure Display Settings To edit the OWconfig file Overriding the default display modeDome Display To modify the OWconfig file Using visual classes To emulate a PseudoColor visual class To check the default visualSunallplanes Shape MIT-SHM Look Default visual id For visual Dome Display Running OpenWindow from the console Configure the Window EnvironmentConfiguring the Common Desktop Environment To use a Dome device with a Sun console To use one or more Dome devicesScreen saver tips Dpms Screen SaverTo set the Dpms Screen Saver Console Modification To use the setenv commandDome CXtra Software Appendix Problem Possible Cause Solution TroubleshootingCategory Characteristic Item Specification Dome C3i SpecificationEnvironment Power SupplyReliability Dome E2 Specification Power Supply Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Display Mtbf 50,000 hours Backlight 2560 x Video ModesDetails of DIN connectors Connector PortsLED Status Lights Power-up sequence information from LED Index 21-22 Canada, European Union, United States Regulatory CompliancePage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement China AustralianJapan KoreaSummary Standard WarrantyStandard Warranty Return Procedure Limitation of Implied Warranties Summary Limitations and Exclusions of Dome DisplaysEffect of Local Law Exclusion of DamagesMedicalsales@planar.com Medicalsupport@planar.com

C3i/EX specifications

The Planar C3i/EX is a state-of-the-art display solution designed for demanding operational environments. Its robust features and advanced technologies make it a favorite among professionals in various sectors, including military, aviation, security, and public safety.

At the heart of the Planar C3i/EX system lies its ultra-high-definition display capabilities, ensuring that crucial information is presented with clarity and precision. With a resolution that often exceeds standard HD, users benefit from enhanced image quality that allows for better visibility of intricate details—vital in mission-critical situations.

One of the standout features of the C3i/EX is its modular design, enabling seamless integration into existing operation centers. Its flexibility allows for the setup of multiple configurations, accommodating various screen sizes and orientations. This adaptability is particularly beneficial for organizations that require specific visual layouts, whether for fixed installations or mobile command units.

The C3i/EX incorporates innovative technologies such as anti-glare and anti-reflective coatings, ensuring optimal performance under diverse lighting conditions. This feature is essential for users who may operate in environments with bright lights or direct sunlight, where screen visibility can become compromised.

Another important characteristic is the Planar C3i/EX's durability. Designed to withstand harsh conditions, the display is built with rugged materials that protect against dust, moisture, and physical shock. This ruggedization ensures that the display can endure the stresses of field operations, making it a reliable component in critical scenarios.

Additionally, the C3i/EX boasts significant connectivity options. With HDMI, DisplayPort, and various network capabilities, users can easily integrate the display with a multitude of sources, facilitating efficient information sharing and collaboration. This feature is particularly advantageous in command centers where rapid data exchange is crucial.

Furthermore, the Planar C3i/EX is engineered with user comfort in mind. It supports wide viewing angles, allowing multiple personnel to view the display clearly from different positions. This element enhances teamwork, as team members can actively engage with the information being presented.

In conclusion, the Planar C3i/EX is a premier display solution that combines high-resolution clarity, modular design, rugged durability, and versatile connectivity. It is specifically tailored for professionals who require reliable and efficient visualization tools in challenging operational environments. With its array of advanced features and technologies, the C3i/EX stands out as an essential resource for contemporary mission-critical applications.