Planar C3i/EX manual Product Information

Page 4

Product Information

The design of the Dome CX/Dome EX digital displays takes into account every known measure to ensure your personal safety. Improper use of the display can result in electric shock, fire, or damage to the display. Read all instructions before setting up the display.

Classification:

Shock Protection: Class I.

Degree of Protection Against Electric Shock: No applied part.

Degree of Protection Against Harmful Ingress of Water: Ordinary equipment (IPX0).

Degree of Safety in the Presence of Flammable Anaesthetic Mixture with Air or with Oxygen or Nitrous Oxide:

Not suitable for use in the presence of a flammable anaesthetic mixture with air or with oxygen or nitrous oxide.

Mode of Operation: Continuous.

Important recycle instruction:

LCD lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal laws. For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG. For lamp-specific disposal information, check

WWW.LAMPRECYCLE.ORG.

iv Dome Display

Image 4 Contents
User’s Guide 020-0377-01A Contents Product Information Symbol explanations Intended useSafety precautions Safety tipsUnpacking and handling tips Preventing fire and injuryCleaning the display Shipping/storing the display Disposal informationDVI cable About the Display System RequirementsDisplay Components Display Positions Tilt range Height rangeDesk Stand Features Stand cable coverInstalling the Display Moving from Dome C3i to Dome EX Display SystemSet the DIP Switch on the Dome DX2 Board To disable VGATo enable Eprom To set landscape mode as default display modeInstall the Display Controller To install the display controllerConnect the Video and Power Cables To connect the cablesInstallation preparation Install Dome DX2 Driver and Dome CXtra SoftwareRequired Sun software packages To install the driver and Dome CXtra Installing the Display Configure Display Settings Overriding the default display mode To edit the OWconfig fileDome Display To modify the OWconfig file Using visual classes To check the default visual To emulate a PseudoColor visual classSunallplanes Shape MIT-SHM Look Default visual id For visual Dome Display Configuring the Common Desktop Environment Configure the Window EnvironmentRunning OpenWindow from the console To use one or more Dome devices To use a Dome device with a Sun consoleDpms Screen Saver Screen saver tipsTo set the Dpms Screen Saver To use the setenv command Console ModificationDome CXtra Software Appendix Troubleshooting Problem Possible Cause SolutionDome C3i Specification Category Characteristic Item SpecificationReliability Power SupplyEnvironment Dome E2 Specification Power Supply Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Display Mtbf 50,000 hours Backlight Video Modes 2560 xConnector Ports Details of DIN connectorsLED Status Lights Power-up sequence information from LED Index 21-22 Regulatory Compliance Canada, European Union, United StatesPage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement Australian ChinaJapan KoreaStandard Warranty Return Procedure Standard WarrantySummary Summary Limitations and Exclusions of Dome Displays Limitation of Implied WarrantiesExclusion of Damages Effect of Local LawMedicalsales@planar.com Medicalsupport@planar.com