Planar C3i/EX manual Symbol explanations, Intended use

Page 5

Symbol explanations

DISPOSAL. Do not use household or municipal waste collection services for disposal of electrical and electronic equipment. EU countries require the use of separate recycling collection services.

CAUTION. Read the accompanying text carefully, for proper operation and maintenance of the display system.

DANGEROUS VOLTAGE. Important precautions about electric shock. Read the accompanying text carefully, to prevent damage to components of the display system and for your safety.

DIRECT CURRENT.

BAROMETRIC PRESSURE. Transport and storage 12,000 meters (39,400 feet), maximum in unpressurized container.

RELATIVE HUMIDITY. Transport and storage 5% to 90% (non-condensing).

TEMPERATURE. Transport and storage -10° to 60° C.

Intended use

The Dome CX/Dome EX display is an AMLCD display designed for viewing medical X-ray images. This unit should not be used near patients and should be kept outside of 1.83 m perimeter and 2.29 m vertical.

IMPORTANT: Only the Dome E5 display can be used for primary image diagnosis in mammography. The Dome C3i, Dome E2,

Dome E3, and Dome E3c display units must not be used for primary image diagnosis in mammography.

CAUTION: Federal law restricts the Dome units to sale by or on the order of a medical practitioner.

Product Information v

Image 5

Contents

User’s Guide 020-0377-01A Contents Product Information Intended use Symbol explanationsSafety tips Safety precautionsPreventing fire and injury Unpacking and handling tipsCleaning the display Disposal information Shipping/storing the displayDVI cable System Requirements About the DisplayDisplay Components Tilt range Height range Display PositionsStand cable cover Desk Stand FeaturesMoving from Dome C3i to Dome EX Display System Installing the DisplayTo disable VGA Set the DIP Switch on the Dome DX2 BoardTo enable Eprom To set landscape mode as default display modeTo install the display controller Install the Display ControllerTo connect the cables Connect the Video and Power CablesRequired Sun software packages Install Dome DX2 Driver and Dome CXtra SoftwareInstallation preparation To install the driver and Dome CXtra Installing the Display Configure Display Settings To edit the OWconfig file Overriding the default display modeDome Display To modify the OWconfig file Using visual classes To emulate a PseudoColor visual class To check the default visualSunallplanes Shape MIT-SHM Look Default visual id For visual Dome Display Running OpenWindow from the console Configure the Window EnvironmentConfiguring the Common Desktop Environment To use a Dome device with a Sun console To use one or more Dome devicesScreen saver tips Dpms Screen SaverTo set the Dpms Screen Saver Console Modification To use the setenv commandDome CXtra Software Appendix Problem Possible Cause Solution TroubleshootingCategory Characteristic Item Specification Dome C3i SpecificationEnvironment Power SupplyReliability Dome E2 Specification Power Supply Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Display Mtbf 50,000 hours Backlight 2560 x Video ModesDetails of DIN connectors Connector PortsLED Status Lights Power-up sequence information from LED Index 21-22 Canada, European Union, United States Regulatory CompliancePage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement China AustralianJapan KoreaSummary Standard WarrantyStandard Warranty Return Procedure Limitation of Implied Warranties Summary Limitations and Exclusions of Dome DisplaysEffect of Local Law Exclusion of DamagesMedicalsales@planar.com Medicalsupport@planar.com