Operation
Operation
Press M1, M2 or M3 to recall settings from a memory preset. Then, press ENTER to confirm your selection. Or, to cancel the operation, press 
to select Cancel and press ENTER.
You can assign each of these three buttons to any |
|
|
|
of four memory presets. For more information, refer |
| USER MEMORY |
|
|
|
| |
to M1 Key / M2 Key / M3 Key on page 57. | M1 | M2 | M3 |
SHARP
4.1
Selecting Video Memory
Press the aspect ratio ( 
) button to select the appropriate aspect ratio for the type of program material being viewed.
4.2
Selecting an Aspect Ratio
When you turn on the PD8130/PD8150, it switches to the last selected input and looks for a valid signal.
Use these buttons on the remote control to select an input source directly. You can assign each of these five buttons to any input. The default assignments are: 1 = HDMI 1, 2 = HDMI 2,
3 = Component 1, 4 =
SOURCE
1 2 3
45
▲
4.3
Selecting An Input Source
For more information, refer to 1 Key / 2 Key / 3 Key / 4 Key / 5 Key on page 57.
Planar PD8130/PD8150 Installation/Operation Manual | 33 |