Operation
Memory: Select Memory from the Main menu, then press ENTER to recall image quality settings previously saved, or to save changed settings in any of four memory locations.
•Recall Memory: Select Recall Memory from the Memory menu to recall saved image quality settings. Unless you select Default (see below), this control affects all sources, not just the active source.
•User Memory 1 and User Memory 2 contain the factory default settings when the projector is initially turned on.
•When you recall the ISF Day or ISF Night memory settings, all settings associated with these stored values are grayed out. This prevents unintended adjustments from being made. To remove this restriction, choose User Memory 1 or User Memory 2.
ISF Day and ISF Night are grayed out unless these custom settings have already been saved.
•Choose Default to restore the
•Save Settings: Select Save Settings from the Memory menu to save any
The following items are saved (for all sources, not just the active source):
•Brightness / Contrast
•Color Saturation / Color Tint
•Sharpness (all settings in
•Noise Reduction (all settings in
•Color Space
•Video Standard
•Gamma
•Color Temperature
•DLP Frame Rate
•Color Gamut
•Brilliant Color™
•DynamicBlack
•Adaptive Contrast
•RGB Adjust (all settings in
•Lamp Power
•Save ISF: Select Save ISF from the Memory menu to save any
Note | You must enter a passcode to access the Save ISF | |
| ||
|
The settings that are saved are the same as those saved with the Save
Settings command (see above).
Planar PD8130/PD8150 Installation/Operation Manual | 41 |