Planar PD8130, PD8150 operation manual LED is flashing red

Page 79

Maintenance and Troubleshooting

Table 5-1. Troubleshooting Chart (continued)

Symptom

Possible Cause(s)

Solution

Image appears “washed out” and/or dark areas appear too bright.

• Brightness is set too	• Lower the brightness
high.	setting.

Colors in the image are	• The Red/Pr, Green/Y or	• Ensure that the source
swapped; for example,	Blue/Pb outputs from	outputs are connected
reds appear blue or vice	the source are	to the correct
versa.	connected to the	PD8130/PD8150 input.
	wrong inputs on the
	PD8130/PD8150.

LED is flashing alternating	• The lamp cover is open.
green and red.	•	The lamp has failed or
		exceeded its usage life.
LED is flashing red.	•	PD8130/PD8150 internal
		temperature is too high.

•Close the lamp cover.

•Replace the lamp with a new one.

•Power off the PD8130/PD8150 and allow it to cool down. Ensure that the intake and exhaust vents are not blocked. Turn the projector back on. If the problem persists, please contact Planar Technical Support for assistance.

LED lights solid red.	• Fans are not working	• Please contact Planar
	properly or power-on	Technical Support for
	self-test has failed.	assistance.

Planar PD8130/PD8150 Installation/Operation Manual

65

Image 79

Contents PD8130 PD8150 Home Theater Projector Page For Projectors, Video Processors and Controllers TWO Year Limited WarrantyContact a Planar Authorized Service Center to Obtain Service Additional Information Important Safety Instructions Declaration of Conformity Compliance InformationFCC Part Table of Contents Operation Maintenance and TroubleshootingSpecifications Table of Contents Xii List Of Figures List Of Figures Xiv About This Manual IntroductionTarget Audience If you need Turn to Using This ManualAdditional Features of the PD8150 Description, Features and BenefitsKey Features and Benefits Optional Accessories Parts ListPD8130/PD8150 at a Glance Controls and FunctionsCursor Keys Exhaust Vent PD8130/PD8150 Rear/Bottom/Top View Rear Cover RGB Power Input 100 to 240 VACComponent 1/SCART RCA connectors PD8130/PD8150 Rear PanelRS-232 Trigger 2 3.5-mm, mini phono jack PD8150 onlyOFF PD8130/PD8150 Remote ControlSource Selection Buttons Brightness Memory Preset Buttons M1 / M2 / M3Picture Adjustment Buttons Contrast Aspect Ratio Selection ButtonRemote Control InstallationOperation IR Reception Angles Installation Overview Quick SetupStep Procedure For Details, Refer to Considerations InstallationProjector Installation Options Installation TypeThrow Distance Ambient LightEstimating Throw Distance Position Vertical and HorizontalVertical Lens Shift Vertical lens shift figures are for ceiling mount Horizontal Lens Shift Example OnlyFolded Optics Folded OpticsMounting the PD8130/PD8150 Connections to the PD8130/PD8150 Connector Panel AccessHDMI/DVI Connections See Figure Connecting Source Components to the PD8130/PD8150RGB Connections Component Video Connections 10. Composite and S-Video Connections Connection RS-232 ControllerCommunications on Theater Equipment Connecting 12-VoltConnecting an External IR Trigger Output to ExternalConnecting to AC Power Turning on the Power Changing the OSD LanguageLens Adjustments Adjusting the PictureOrientation Installation Installation Selecting An Input Source OperationSelecting Video Memory Selecting an Aspect RatioMain Using Picture-In-Picture PIPAvailable Main and PIP Source Combinations PIP Input SourceUsing the On-Screen Menus System ServiceMain AdvancedPD8130/PD8150 Main Menu Aspect Geometry of Projected Image Aspect Ratio Settings169 Letterbox 1080i Hdtv Image Sub-menu You must enter a passcode to access the Save ISFTypical Pluge Pattern for Adjusting Brightness Typical Test Pattern for Adjusting Sharpness Operation Overscan Examples CropSource Select Sub-Menu PD8130/PD8150 Advanced Menu AdvancedOperation Color X/y Color Gamut ValuesRGB Adjust Sub-Menu 10. Fine Sync Sub-Menu Adjust the Phase after adjusting Tracking see below. If 11. PD8130/PD8150 System Menu System12. Source Enable Sub-Menu PBP1 PBP2 14. PIP Split-Screen Mode Control Operation Language 15. PD8130/PD8150 Service Menu ServiceOperation OSD menus are not available when in test pattern Lamp Replacement Maintenance and TroubleshootingLight and Enter Troubleshooting TipsTroubleshooting Chart Symptom Possible Causes SolutionLED is flashing red Maintenance and Troubleshooting Serial Communications Key CommandsRS232 Remote Button IR Code Description Keyname Set Serial Command Key Names and IR CodesGam.brig Operations Control Commands Function Action on unit Operations CommandsValues Serial CommandsSave.isf Source.sel = ? Bcolor = ? Auto.pow.off = ? M1.key = ? Act.source Language = ? PD8130/PD8150 Specifications SpecificationsPD8130/PD8150 Specifications Aspect Ratios Native ResolutionPerformance MicrodisplayUniversal Power Supply DimensionsWeight without lens Operating TemperaturePD8130/PD8150 Dimensions PD8130/PD8150 DimensionsSupported Timings Supported Signal Timings by InputPAL-B/G Page Part No -0858-00 rev. a January