Onkyo TX-SA706 Bi-amping the Front Speakers, Bi-amping Speaker Hookup, Tweeter high terminal

Page 19

Bi-amping the Front Speakers

The FRONT L/R and SURR BACK L/R terminal posts can be used with front speakers and surround back speakers respectively, or bi-amped to provide separate tweeter and woofer feeds for a pair of front speakers that support bi-amping, providing improved bass and treble performance.

•When bi-amping is used, the AV receiver/AV ampli- fier is able to drive up to 5.1 speakers in the main room.

•For bi-amping, the FRONT L/R terminal posts con- nect to the front speakers’ woofer terminals. And the SURR BACK L/R terminal posts connect to the front speakers’ tweeter terminals.

•Once you’ve completed the bi-amping connections shown below and turned on the AV receiver/AV amplifier, you must set the “Speakers Type” setting to “Bi-Amp” to enable biamping (see page 45).

Important:

•When making the bi-amping connections, be sure to remove the jumper bars that link the speakers’ tweeter (high) and woofer (low) terminals.

•Bi-amping can only be used with speakers that support bi-amping. Refer to your speaker manual.

Bi-amping Speaker Hookup

1 Connect the AV receiver/AV amplifier’s FRONT R positive (+) terminal to the right speaker’s pos- itive (+) Woofer (low) terminal. And connect the AV receiver/AV amplifier’s FRONT R negative

(–)terminal to the right speaker’s negative (–) Woofer (low) terminal.

2

Connect the AV receiver/AV amplifier’s SURR

 

BACK R positive (+) terminal to the right

 

speaker’s positive (+) Tweeter (high) terminal.

 

And connect the AV receiver/AV amplifier’s

 

SURR BACK R negative (–) terminal to the right

 

speaker’s negative (–) Tweeter (high) terminal.

 

 

3

Connect the AV receiver/AV amplifier’s FRONT

 

L positive (+) terminal to the left speaker’s posi-

 

tive (+) Woofer (low) terminal. And connect the

 

AV receiver/AV amplifier’s FRONT L negative

 

(–) terminal to the left speaker’s negative (–)

 

Woofer (low) terminal.

 

 

4

Connect the AV receiver/AV amplifier’s SURR

 

BACK L positive (+) terminal to the left speaker’s

positive (+) Tweeter (high) terminal. And connect the AV receiver/AV amplifier’s SURR BACK L negative (–) terminal to the left speaker’s negative

(–) Tweeter (high) terminal.

Tweeter (high)

Tweeter (high)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Woofer (low)

Woofer (low)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Right speaker

 

 

 

 

Left speaker

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents TX-SR706 Avis Important Safety InstructionsBatteries and Heat Exposure Warning PrecautionsPower Preventing Hearing Loss CautionFor British models PrecautionsMake sure you have the following accessories Supplied AccessoriesConnections FeaturesAmplifier ProcessingContents TX-SR706 other than North American model TX-SA706 Front & Rear PanelsFront Panel TX-SR706 North American modelFront & Rear Panels Display TX-SR706 other than North American model Rear PanelHdmi in 1-4 and OUT Remote ControlPhono Component Video in 1Front L/R, CENTER, Surr L/R, and Surr Back L/R speakers VCR/DVR IN/OUTDVD V, S, Front L/R Zone 2 Line OUT L/RInstalling the Batteries Remote ControllerAiming the Remote Controller Controlling the AV Receiver/AV Amplifier Remote ControllerEnjoying Home Theater About Home TheaterConnecting Your Speakers Connecting the AV Receiver/AV AmplifierStrip about 5/8 15 mm Connecting the AV Receiver/AV AmplifierSpeaker Connection Precautions Connecting the Speaker CablesBi-amping Speaker Hookup Bi-amping the Front SpeakersTweeter high terminal Attach the FM antenna, as shown North American models Connecting Antenna TX-SR706 onlyConnecting the AM Loop Antenna Connecting the Indoor FM AntennaConnecting an Outdoor AM Antenna Connecting an Outdoor FM AntennaUsing a TV/FM Antenna Splitter AV Cables & Jacks About AV ConnectionsAV Connection Color Coding Optical Digital JacksWhich Connections Should I Use? Connecting Both Audio & VideoVideo Connection Formats Audio Connection Formats Signal SelectionHint Connecting a TV or ProjectorVideo Connection Audio ConnectionConnecting a DVD Player Hooking Up the Multichannel DVD Input Connecting a VCR or DVD Recorder for Playback Make the audio connection a Connecting a VCR or DVD Recorder for RecordingSatellite, cable, set-top box, etc Connecting a Game Console Camcorder, etc Connecting a Camcorder or Other DeviceAbout Copyright Protection Connecting Components with HdmiAbout Hdmi Supported Audio FormatsStep Video SignalsAudio Signals Making Hdmi ConnectionsCD Player or Turntable MM with Built-in Phono Preamp Step Connecting a CD Player or TurntableTurntable MM with no Phono Preamp Built-in Connecting a Cassette, CDR, MiniDisc, or DAT Recorder Connecting a Tuner TX-SA706 only Connecting a Power AmplifierIf Your iPod Supports Video Connecting an RI DockDirect Change Connecting Onkyo u ComponentsConnecting the Power Cord Auto Power On/StandbyTurning On and Standby Turning On the AV Receiver/AV AmplifierSmooth Operation in a Few Easy Steps Onscreen Setup Menus and Display First Time SetupUsing the Onscreen Setup Menus Using the Display to change the settingsPress the Setup button First Time SetupVideo Input Setup Hdmi Input SetupComponent Video Setup Tons to select 3. Digital Audio Digital Input SetupTons to select 1. Input Assign Then press EnterSpeaker Settings menu appears Speaker SettingsPress the Receiver button, followed by the Setup button Speaker Setup menu appearsTons to select 6. Miscella TV Format Setup Not North American modelsTons to select 2. OSD Setup When you’ve finished, pressAM Frequency Step Setup on some models Tape or GAME/TV appears Changing the Input DisplayPress the Tape or GAME/TV Input selector button so that1st measurement position Automatic Speaker Setup Audyssey MultEQUsing Audyssey MultEQ Measurement PositionsFollowing screen appears Automatic speaker setup startsTurn on the AV receiver/AV amplifier and the connected TV Press EnterMicrophone Disconnect the speaker setupAmbient noise is too high Error MessagesSpeaker Detect Error Writing ErrorUsing a Powered Subwoofer Changing the Speaker Settings ManuallySelecting the Input Source Select a listening mode and enjoySee Using the Listening Modes on Basic OperationsBasic Operations Using the Multichannel DVD InputAdjusting the Bass & Treble Setting the Display BrightnessTip Using the Sleep TimerUsing Headphones Muting the AV receiver/AV amplifierListening to the Radio Using the TunerTuning into Radio Stations Listening to the Radio TX-SR706 onlyListening to the Radio TX-SR706only Presetting AM/FM StationsSelecting Presets Deleting PresetsRDS Program Types PTY Using RDS not North American modelFinding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP AV Recording RecordingRecording Separate AV Sources Selecting on the AV receiver/AV amplifier Using the Listening ModesSelecting with the Remote Controller Selecting Listening ModesListening Modes Available for Each Source Format Using the Listening ModesAnalog and PCM Sources Dolby Digital, and Dolby Digital Plus Sources DTS-ES DTS SourcesTrueHD Sources DTS-HD Sources DSD DTS Express and DSD SourcesAbout the Listening Modes Channel source + Dolby PLIIx Movie DTS-HD High Resolution AudioDolby TrueHD Channel source + Dolby PLIIx MusicOnkyo Original DSP Modes Onscreen Setup Menus Advanced SetupSee Speaker Settings on Advanced SetupSpeaker Setup Speaker SettingsIf no center speaker is connected, select Off THX Low-Pass Filter for the LFE ChannelDouble Bass Tons to select Double BassRepeat for all speakers Speaker DistanceIs the same Repeat until the volumeSpeaker Level Calibration Test tone from each speakerAudyssey Equalizer SettingUse the Left and Right e/r buttons to select OffTHX Audio Setup screen appears THX Audio SetupRepeat and 7 for each speaker Tons to select Loudness Plus 4ft 1.2m default1ft 0.3m Ft 4 ft 0.3 m 1.2 mMultiplex/Mono Settings Audio Adjust FunctionsPLIIx/Neo6 Music Mode Settings LFE Level Settings Dolby EX Input Signal SettingTheater-Dimensional Listening Setting DSD SettingRe-EQ Function Adjust Using the Audio ButtonTone Control Settings Late Night FunctionSync Audyssey Dynamic EqtmMusic Optimizer Speaker LevelsSources Assigning Listening Modes to InputIntelliVolume Source SetupName Edit Selects when you want to cancel the name entryTo correct a character Picture Adjust Volume Setup Miscellaneous Volume/OSD SetupOSD Setup Tuner TX-SR706 only Hardware SetupRemote Control ZoneSirius Parental Lock On North American model Output ResolutionZoom Mode Analog MultichColor Film ModeAudio TV Out Lip SyncControl Power ControlTV Control Locked Lock SetupUnlocked Digital Input Signal Formats Automatic Audio Input Selection SetupZone 2 12V Trigger Connecting ZoneConnecting Your Zone 2 Speakers to an Amp in Zone ZoneNot Act Setting the Powered ZoneTons to select 2. Zone2, Zone2 menu appearsControlling Zone 2 with the Remote Controller Using ZoneControlling Zone 2 from the AV receiver/AV amplifier 100 Adjusting the Volume for ZoneMuting Zones Using a Multiroom Kit with a Cabinet Using a Multiroom Kit with Zone101 102 Preprogrammed Remote Control CodesEntering Remote Control Codes Controlling Other Components103 Remote Control Codes for Onkyo Components Connected via uResetting Remote Mode Buttons Resetting the Remote ControllerControlling a TV 104Controlling a DVD Player, or DVD Recorder 105Controlling a VCR or PVR 106Controlling a Satellite Receiver or Cable Receiver 107Controlling a CD Player, CD Recorder, or MD Player 108Disc +/- button Controlling an RI Dock 109Controlling a Cassette Recorder 110Controlling a Tuner TX-SA706 only 111 Learning CommandsRunning Macros Using Macros112 Making Macros113 Specifications114 Troubleshooting115 Troubleshooting116 117 Important Note Regarding Video Playback 118119 Video Resolution Chart3 4 4 7 2

TX-SA706 specifications

The Onkyo TX-SA706 is a sophisticated, high-performance AV receiver designed to elevate your home theater experience. As part of Onkyo's esteemed lineup, this receiver offers a combination of advanced features, innovative technologies, and impressive specifications that cater to the needs of audiophiles and home cinema enthusiasts alike.

One of the standout features of the TX-SA706 is its powerful amplification system. With multiple channels delivering robust power output, it is capable of driving most speaker configurations, from a standard 5.1 surround sound setup to more elaborate systems. This ensures that you get a rich and immersive audio experience perfect for movies, music, and gaming.

The TX-SA706 supports high-definition audio formats, including Dolby Atmos and DTS:X, allowing for an intricate and lifelike soundstage. These immersive technologies use object-based audio to place sound in a three-dimensional space, creating a more engaging listening experience. Coupled with the receiver’s ability to decode lossless audio formats, listeners can enjoy their content in superior quality.

Video performance is equally impressive, with support for 4K Ultra HD video pass-through and upscaling. The receiver features multiple HDMI inputs and outputs, allowing for seamless connectivity with all your devices, including Blu-ray players, gaming consoles, and streaming gadgets. Additionally, it is compatible with HDR10, Dolby Vision, and BT.2020, ensuring vibrant colors and sharp images for a cinematic viewing experience.

Connectivity options are extensive, as the TX-SA706 comes equipped with built-in Wi-Fi and Bluetooth capabilities. This allows for easy streaming from various devices and music services, making it convenient to access your favorite playlists and tracks wirelessly. For those who prefer a more traditional approach, the receiver is outfitted with multiple analog and digital inputs, ensuring compatibility with a wide array of audio sources.

The TX-SA706 also includes Zone 2 and Zone 3 features, enabling multi-room audio setups so that different areas of your home can enjoy different audio sources simultaneously. This flexibility makes it a perfect choice for those who wish to extend their audio experience beyond a single room.

In summary, the Onkyo TX-SA706 is a versatile AV receiver that exhibits powerful performance, advanced audio and video technologies, and comprehensive connectivity options. Its combination of immersive sound, stunning visuals, and multi-room capabilities make it an excellent choice for enhancing your home entertainment system, ensuring that every viewing and listening session is one to remember.
Top Page Image Contents