Onkyo TX-SA706 instruction manual Using Zone, Controlling Zone 2 from the AV receiver/AV amplifier

Zone 2—Continued

Using Zone 2

This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2.

Controlling Zone 2 from the AV receiver/AV amplifier

1 2 1

1	To turn on Zone 2 and select an
	input source, press the [ZONE 2]
	button repeatedly.

Alternatively, press the [ZONE 2] button followed by an input selector button within 8 seconds.

Zone 2 turns on, the ZONE 2 indicator lights up, and the 12V TRIGGER OUT ZONE 2 goes high (+12 V).

To select AM or FM press the [TUNER] input selector button repeat- edly (TX-SR706 only). On the North American model, you can also select XM or SIRIUS.

To select the same source as that of the main room, press the [ZONE 2] button repeatedly until “Z2 Selector: Source” appears on the display.

Note:

You cannot select different AM or FM radio stations for your main room and Zone 2. The same AM/FM radio station will be heard in each room.

2	To turn off Zone 2, press the
	[OFF] button.

Note:

While Powered Zone 2 is being used, listening modes that require surround back speakers (6.1/7.1), such as Dolby Digital EX, DTS-ES, and THX Select2 Cinema, are unavailable.

Controlling Zone 2 with the Remote Controller

ON/ ZONE2

STANDBY

INPUT

SELECTOR

Note:

To control Zone 2, you must press the remote control- ler’s [ZONE 2] button first.

1	Press the [ZONE 2] button, then
	point the remote controller at the
	AV receiver/AV amplifier and
	press the [ON/STANDBY] button.

Zone 2 turns on, the ZONE 2 indicator lights up, and the 12V TRIGGER OUT ZONE 2 goes high (+12 V).

2	To select an input source for
	Zone 2, press the [ZONE 2] but-
	ton, followed by an INPUT
	SELECTOR button.
	To select AM or FM press the [TUNER]
	INPUT SELECTOR button repeatedly.
	On the North American model, you can
	also select XM or SIRIUS.
	Note:
	You cannot select different AM or FM
	radio stations for your main room and
	Zone 2. The same AM/FM radio station
	will be heard in each room.
3	To turn off Zone 2, press the
	[ZONE 2] button, followed by the
	[ON/STANDBY] button.

99