Onkyo TX-SA706 Digital Input Setup, Tons to select 1. Input Assign, Then press Enter

First Time Setup—Continued

Digital Input Setup

If you connect a component to a digital input jack, you must assign that jack to an input selector. For example, if you connect your CD player to the OPTICAL IN1 jack, you should assign that jack to the CD input selector. By default, the COAXIAL IN1 jack is assigned to the DVD input selector, although this can be changed.

Here are the default assignments.

Input selector	Default assignment
DVD	COAX1
VCR/DVR	COAX2
CBL/SAT	COAX3
GAME/TV	OPT1
AUX	FRONT
TAPE	- - - - -
TUNER	- - - - -
(TX-SA706 only)
CD	OPT2
PHONO	- - - - -

1	Press the [RECEIVER] button fol-
	lowed by the [SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.

2	Use the Up and Down [q]/[w] but-
	tons to select “1. Input Assign”,
	and then press [ENTER].
	The “Input Assign” menu appears.
		1. Input Assign
	1.	HDMI Input
	2.	Component Video Input
	3.	Digital Audio Input

3	Use the Up and Down [q]/[w] but-
	tons to select “3. Digital Audio
	Input”, and then press [ENTER].
	The “Digital Audio Input” menu
	appears.
	1–3.	Digital Audio Input
	DVD	COAX 1
	VCR/DVR	COAX 2
	CBL/SAT	COAX 3
	GAME/TV	OPT 1
	AUX	FRONT
	TAPE	- - - - -
	TUNER	- - - - -
	CD	OPT 2
	PHONO	- - - - -

4 Use the Up and Down [q]/[w] but- tons to select an input selector, and use the Left and Right [e]/ [r] buttons to select “COAX1”, “COAX2”, “COAX3”, “OPT1”, “OPT2”, or “- - - - - (analog)”.

• When an HDMI IN is assigned to an input selector in “HDMI Input Setup” on page 42, this input assign- ment is automatically set to the same HDMI IN. And in addition to the usual inputs (e.g., COAX1, COAX2, etc.), you can also select HDMI inputs. If you change the input assignment from an HDMI IN to one of the other inputs (e.g., COAX1 or COAX2), be sure to set the “Auto- matic Audio Input Selection Setup” on page 96 to the same input (e.g., COAX1 (Auto) or COAX2 (Auto)).

• “AUX” is used only for digital input from the front panel terminals. When HDMI IN is assigned to “AUX” in the “HDMI Input Setup” on page 42, the same HDMI IN can be selected.

Examples:

If you connect your DVD player to the OPTICAL IN 1 jack, set “DVD” to “OPT1”.

If you want to listen to audio from the component connected to the OPTICAL IN 2 jack when the VCR/DVR input selector is selected, set “VCR/DVR” to “OPT2”.

If you want to listen to audio from the component connected to the COAX- IAL IN 1 jack when the CBL/SAT input selector is selected, set “CBL/ SAT” to “COAX1”.

For input selectors that you don’t want to assign a digital input jack, set to “- - - - - (analog)”.

5	Press the [SETUP] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.

44