Optoma Technology TW6313D Image, Brightness, Contrast, Color Settings, Keystone, Zoom, EN-26

Page 26
Image

Image

Brightness

Brighten or darken the image.

Contrast

Set the difference between light and dark areas.

Color Settings

Adjust the color temperature. At higher temperature the screen looks colder; at lower temperature, the screen looks warmer. If you select “User”, then you can change the intensity of each of 3 color (Red, Green, Blue) to customize user color temperature.

Keystone

Manually correct distorted images resulting from an angled projection.

Zoom

Zoom in and out the images.

Aspect Ratio

Use this function to choose your desired aspect ratio.

For XGA models:

Source

480i/p

 

576i/p

1080i/p

720p

PC

4:3

1024x768 center

 

 

 

 

16:9-I

1024x576 center

 

 

 

 

16: 9-II

1024x614 center(show 1024x768).

 

 

Native

Displays the original image without any scaling.

 

Auto(Default)

Automatically selects the appropriate display format.

 

EN-26

Image 26
Contents Connecting Video source devices CONTENTSUsing the Product Adjusting the Projector Zoom and FocusSafety Instructions Usage NoticeEN-3 Notes on the AC Power Cord EN-4Projector Features IntroductionPackage Contents 9 8 7 Projector OverviewFront View EN-8 Rear ViewBottom View 1 2 3 4 5 Using the ProductControl Panel Connection Ports Remote Control Page 16 Volume+15 Re-SYNC AV muteInstalling the Batteries EN-13Remote Control Operation EN-14Connection EN-15Connecting a monitor Connecting a computer or monitorConnecting a computer Connecting Video source devices EN-17To connect the projector to an HDMI source device Connecting an HDMI source deviceConnecting a Component Video source device To connect the projector to a Component Video source deviceEN-19 Connecting an S-Video source deviceTo connect the projector to an S-Video source device EN-20 Connecting a composite Video source deviceTo connect the projector to a composite Video source device Powering Off the Projector Powering On/Off the ProjectorPowering On the Projector OperationEN-22 Adjusting the Projector HeightAdjusting the Projector Zoom and Focus WXGA model Adjusting Projection Image Size XGA model EN-23How to operate Menu OperationEN-25 Brightness ImageColor Settings ContrastThere are many factory presets optimized for various types of images Frequency SignalPhase H Position Horizontal PositionVolume Video ImageSound ColorMenu Position SettingLamp Time Reset ProjectionPower mode standby 3D Sync Invert Wireless3D Mode EN-32EN-33 Factory DefaultLanguage Use web browser to control your projector EN-34Input-Length characters EN-35Category Connect you computer to the projector EN-36„ IP address10.0.50.101 „ Subnet mask255.0.0.0 „ Default gateway10.0.50.2545. Click Use the following IP address, and type in as below EN-37Crestron RoomView Control Tool EN-382. Edit Room 3. Edit Attribute EN-394. Edit Event EN-40Appendix Replacing the LampEN-42 Ceiling mount installation EN-43Compatibility Modes ComputerEN-45 Video EN-46RS232 Commands and Protocol Function List RS232 Pin AssignmentsRS232 Protocol Function List EN-48EN-49 EN-50 XGA n 0/1/2/3/4 = 43/169-I/169-II/Native/AUTOImage problems TroubleshootingStart-up problems Remote control problemsProjector Status LED Indicator MessagesPOWER TEMPEurope Optoma Global OfficesCanada FranceKorea ScandinaviaLatin America Japan凯旋路 1205 号 5 楼 上海市长宁区+86-21-62947376 +86-21-62947375Notice Shielded cables Regulation & Safety NoticesFCC Notice Declaration of Conformity for EU countries Operation conditionsNotice Canadian users Disposal instructions1 Switch 14 Enter