Optoma Technology TW6313D appendix Wireless, 3D Mode, 3D Sync Invert, EN-32

devices.

„On: Assign an IP address to the projector from an external DHCP server automatically.

„Off: Assign an IP address manually.

„IP Address: Select an IP address.

„Subent mask: Select subnet mask number.

„Gateway: Select the default gateway of the network connected to the projector.

„DNS: Select DNS number.

„Apply: Press " " and then choose "Yes" to apply the selection.

Wireless

This setting is only for wireless module use.

Wireless is only functional with VGA 1 connector.

3D Mode

„On: Enable 3D Mode function.

„Off: Disable 3D Mode function.

When 3D Sync is set to "On", the settings for input source or broadcast device are required as below:

1.For S-VIDEO and VIDEO input source, signal type should be NTSC (60).

2.For computer input source, the hardware and software requirements should be Windows 7 operating system, 3D videos and professional 3D video player softwares. Computer's output frequency should be 120Hz and display card should be higher than NVIDIA 9800.

3D Sync Invert

„On: Invert left and right frame contents.

„Off: Default frame contents.

EN-32